There are 30 products.
125khz RFID reader for wall mounting, RS232, Wiegand, 10 digit ASCII (Decimal)

RFID Reads 125khz Em-Marin
Em 4100
64 Bit Manchester Coding
10 digit ASCII
RS232 - Only TX and GND
Wiegand Interface
Reading distance: 0 - 20cm Depending Of tag
Supply voltage: 5 - 12VDC
Use liniar power supply (not switch mode)
interface cable from the back
IP67
Goal: 78 x 43 x 15 mm

137.89 €
Item numberRFID-ER
On the way in
RFID Reads 125kHz EM Standard Hex 40bit. 2-wire RS485 half-duplex. Command-controlled from PC

RS485 Command Controllet Ready / Read
Set to Read. Called to Transfer Take UID Code
10 digit Hex - (26 digits for PC)
2-wire RS485 Half-duplex.
125 kHz EM format.
12vdc 0.2a (MDFollows not)
Dimensions: 113.5 x 45.6 mm (L X B)

164.15 €
Item numberRFID-R10N85
Physically in stock
RFID reader 125kHz EM400x, 8 characters Decimal, USB Powered by USB

Keyboard emulation: 8 decimal places (HID)
frequency: 125 kHz EM 4001/4002
Power supply: 5VDC from the USB port
Operating temperature: -10 - +75°C 
Humidity during operation: waterproof
Reading range: 5 ~ 15 cm
Cable length: 164 cm
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
wall mounting, water resistant

102.51 €
Item numberRFID-R5USB
Physically in stock
RFID Reader, EM standard 125kHz, to RS232, mounted in a wall in wall, frame etc.

RFID 125kHz reader with RS232
EM 4xxx Standard Tag (40 bit HEX)
Mounting in Ø 31 mm Hole
Length from Resess: 27 mm
Resess Width: 40 mm
RS232 , 9600, N, 8, 1
9 - 12VDC / 50mA
Temperature: -10 - + 70 ° C
Material: PBC
IP54 from front

71.56 €
Item numberRFID-R4
Physically in stock
RFID reader 125kHz EM400x HID keyboard emulation

Keyboard emulation: 10 digits, 40bit ASCII Decimal
frequency: 125 kHz EM 4001/4002
Power supply: 5VDC from the USB port
Operating temperature: -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable length: solved USB cable
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Desktop - desktop model

108.54 €
Item numberRFID-R5USB-D10
On the way in
RFID & QR Code Reader: 125kHz EM4100/4200, Wiegand 34, Wall Mounted

RFID EM-Marin and QR code reader
125kHz EM4100/4200
Reading as facing right
Built-in buzzer for sound notification
Can read multiple formats
With CPU watchdog
Power supply: 12V DC
Wiegand 26/34 bits
Dimensions: 125 x 83 x 30 mm

222.71 €
Item numberRFID-RM-QR
Physically in stock
IP68 RFID reader, 125kHz / 13.56MHz, Wiegand 26/34, only for access control with Wiegand

Waterproof RFID reader
only with Wiegand Interface
Connect to access controls with Wiegand
TAG Type: EM / Mifare
Reading distance: 5.8 cm
IP68
Frequency: 125kHz / 13,56MHz
LED and Buzzer
Cable out from the back
Detachable Backpiece
Supply Voltage: 12VDC
Dimensions: 86 x 86 x 22mm

237.98 €
Item numberRFID-MR-IP68
Physically in stock
USB MIFARE and EM RFID reader

Dual band RFID card reader for USB - 10 Decimal
125 kHz: EM-Marin EM41xx, EM4200
13,56MHz: Mifare - ISO14443A
HID - Keyboard Emulation
Reading distance: 5 to 8cm
Powered by USB
USB interface
operating temp. -10 ° to + 70 ° C
dimensions: 98 x 63 x 10mm (L x B x H)

136.81 €
Item numberRFID-D5USB-D10A
Physically in stock
RFID reader 125kHz, Waterproof - Dec 8 digits, 32bit, HID - keybord emulation

Keyboard emulation: 8 digits, 32bit Decimal
Frequency: 125kHz EM4xxx
Power supply: 5VDC from USB port
Operating temperature : -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable: Fixed USB cable from bottum - epoxy filled
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Waterproof - IP67

128.91 €
Item numberRFID-R51EUSB-D8
On the way in
125kHz RFID Key Ring, Read/Write, Black Plastic

1 pc 125KHz RFID tag

Detection range 0-5 cm

Read and rewrite function

Keychain included

Works with 125 kHz readers

No external power required

Ideal for access control

Made of plastic

Weighs 6 g

6.03 €
Item numberRFID-TAG-KEY-DUP
Physically in stock
Showing 21-30 of 30 item(s)