RS232

RS232

RS232
There are 3 products.
Outdoor EM 125khz RFID reader. UID is 40 bits, 10 digit ASCII. RS232 and Wiegand.

125khz RFID reader for outdoor mounting on wall
sealed with hardened epoxy - cable mid rear
EM4000 125khz RFID Reader for wall mounting
reading distance 0 - 5cm, depending on roof size
40 bit code, 10 digits ASCII (Decimal)
RS232, only TX. GND
9600, 0 Start, 8 Data, 1 Stop, Non Parity, FLOW: HW
Wiegand 26bit format
LED Indicator and Buzzer Control Manager
Supply voltage: 12VDC / 200ma
Cable length 1 meter (8 Core)
Goal: 114 x 46 x 13 mm

126.90 €
Item numberRFID-R10N
On the way in
RFID reader to 125kHz cards. IP64. RS232 / RS485 / Wiegand. Access control.

RFID reader for RS232 / RS485 / Wiegand
IP64
Range up to 60cm
Serial communication to / from PC
Relay output (24VDC / 2A) Serial Enabled from PC
Baud Rate : 9600, 8, n, 1
Dim: 210 x 210 x 28 mm
Extended temperature -10 - 60°C
supply: DC 12V, 350mA

425.85 €
Item numberRFID-R60A
Physically in stock
125khz RFID reader for wall mounting, RS232, Wiegand, 10 digit ASCII (Decimal)

RFID Reads 125khz Em-Marin
Em 4100
64 Bit Manchester Coding
10 digit ASCII
RS232 - Only TX and GND
Wiegand Interface
Reading distance: 0 - 20cm Depending Of tag
Supply voltage: 5 - 12VDC
Use liniar power supply (not switch mode)
interface cable from the back
IP67
Goal: 78 x 43 x 15 mm

137.89 €
Item numberRFID-ER
On the way in
Showing 1-3 of 3 item(s)