There are 19 products.
125khz RFID reader for wall mounting, RS232, Wiegand, 10 digit ASCII (Decimal)

RFID Reads 125khz Em-Marin
Em 4100
64 Bit Manchester Coding
10 digit ASCII
RS232 - Only TX and GND
Wiegand Interface
Reading distance: 0 - 20cm Depending Of tag
Supply voltage: 5 - 12VDC
Use liniar power supply (not switch mode)
interface cable from the back
IP67
Goal: 78 x 43 x 15 mm

137.89 €
Item numberRFID-ER
On the way in
RFID Reader, EM standard 125kHz, to RS232, mounted in a wall in wall, frame etc.

RFID 125kHz reader with RS232
EM 4xxx Standard Tag (40 bit HEX)
Mounting in Ø 31 mm Hole
Length from Resess: 27 mm
Resess Width: 40 mm
RS232 , 9600, N, 8, 1
9 - 12VDC / 50mA
Temperature: -10 - + 70 ° C
Material: PBC
IP54 from front

71.56 €
Item numberRFID-R4
Physically in stock
125kHz EM RFID reader with USB HID. Desktop with card slot. Can be programmed

125kHz EM 4xxx reader with USB
USB HID (plug and play)
Powered from USB
Additional purchases from Decimal to HEX, normal or reverse
Additions with start and or stop character
Supports: EC standard 125kHz
Dimensions: 100 x 65 x 23 mm
Material: ABS
REMEMBER: Order the desired version - additional purchase

141.10 €
Item numberRFID-RM-G
Physically in stock
RFID reader 125kHz EM400x, waterproof - HEX 10 digits, 40bit, HID - keybord emulation

Keyboard emulation: 10 digits, 40bit HEX
frequency: 125 kHz EM 4001/4002
Power supply: 5VDC from the USB port
Operating temperature: -10 - + 75 ° C
Environment: Waterproof 100 % sealed
reading range: 5 ~ 15 cm
cable: Fixed USB cable from the rear of
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
IP67 close for outdoor use

103.31 €
Item numberRFID-R51USB-H10
Physically in stock
Outdoor EM 125khz RFID reader. UID is 40 bits, 10 digit ASCII. RS232 and Wiegand.

125khz RFID reader for outdoor mounting on wall
sealed with hardened epoxy - cable mid rear
EM4000 125khz RFID Reader for wall mounting
reading distance 0 - 5cm, depending on roof size
40 bit code, 10 digits ASCII (Decimal)
RS232, only TX. GND
9600, 0 Start, 8 Data, 1 Stop, Non Parity, FLOW: HW
Wiegand 26bit format
LED Indicator and Buzzer Control Manager
Supply voltage: 12VDC / 200ma
Cable length 1 meter (8 Core)
Goal: 114 x 46 x 13 mm

126.90 €
Item numberRFID-R10N
On the way in
Waterproof Dual Band RFID reads 125kHz, 13.56MHz, NFC, EM400X, MIFARE. 10 characters decimal ascii. HID

Dual band RFID card reader for USB - Decimal
10 characters decimal (ASCII) - 40bit
125 kHz, 13.56 MHz, NFC
125khz: EM4001, EM4002, EM4200
Mifare: ISO 1443A/B/15693
HID - Keyboard Emulation
Reading distance: Up to 10 cm
Align via USB
USB interface
Dip-SW to ID format setting - see Table 
Environment: IP67 Waterproof, outdoor mounting
operating temp. -25 ° to + 70 ° C
target: 88 x 56 x 18 mm

Call +45 56 66 20 20 for price
Item numberRFID-D51USB-D10
On the way in
Dual Band RFID reader 125kHz, 13.56MHz, NFC, EM400x, Mifare and Desfire

Dual Band RFID card reader for USB - Decimal/HEX
8-10 characters Decimal/HEX - 32/40bit
125 kHz, 13.56 MHz, NFC
125kHz: EM4001, EM4002, EM4200
Mifare: ISO 1443A/B/15693
HID - keyboard emulation
Reading distance: up to 10 cm
Supplied via USB
USB interface
ID format setting with DIP switches - see diagram
Hard copy form with the product
operating temp. -25° to +70°C
Dimensions: 88 x 56 x 18 mm

139.36 €
Item numberRFID-D5USB-D10
Physically in stock
RFID Duplicator, 125kHz / Mifare / NFC reads / writes with USB interface. Can clone uid.

RFID Copy Reader / Writes to T5577 RW Tag
interface: USB
Work voltage: 5 VDC
Work current: 200mA
Standby Stream: 50mA
Normal current: 100mA
125kHz, 13,56MHz Mifare / NFC
Compatible with CCID and PC / SC
IC / ID Dual Frequency Replication
Supporter ID125K, 8800, 5200, 4305, 5577, 8265 Card
Support UID, Fuid, Cuid, UFUID
IC Semi-Encrypted Card, IC Full Encryption Card
Dim: 108 (L) x 68 (W) x 12 mm (H)

105.32 €
Item numberRFID-KOPI-USB
Physically in stock
RFID Handheld RFID reads 125kHz. For rounding guards. Memory for 14,000 readings with date and time

Personell who shall document the route with the date and time
RFID TAGs placed at check-points and has unique ID
RFID TAG is 125kHz EM400X
guard pointing toward Days and press the scan button
Each TAG reading acknowledged with short vibration
Operation with a pressure
Journal memory: approximately 14,000 items
battery - easy to replace
up to 55,000 scans at full battery
interface is USB
Operating temperature: -10 to + 55 ° C
Patrol Tour Manager software included

749.60 €
Item numberRFID-PATROL-U
On the way in
RFID reader to 125kHz cards. IP64. RS232 / RS485 / Wiegand. Access control.

RFID reader for RS232 / RS485 / Wiegand
IP64
Range up to 60cm
Serial communication to / from PC
Relay output (24VDC / 2A) Serial Enabled from PC
Baud Rate : 9600, 8, n, 1
Dim: 210 x 210 x 28 mm
Extended temperature -10 - 60°C
supply: DC 12V, 350mA

425.85 €
Item numberRFID-R60A
Physically in stock
RFID Reads 125kHz EM Standard Hex 40bit. 2-wire RS485 half-duplex. Command-controlled from PC

RS485 Command Controllet Ready / Read
Set to Read. Called to Transfer Take UID Code
10 digit Hex - (26 digits for PC)
2-wire RS485 Half-duplex.
125 kHz EM format.
12vdc 0.2a (MDFollows not)
Dimensions: 113.5 x 45.6 mm (L X B)

164.15 €
Item numberRFID-R10N85
Physically in stock
RFID reader 125kHz EM400x HID keyboard emulation

Keyboard emulation: 10 digits, 40bit ASCII Decimal
frequency: 125 kHz EM 4001/4002
Power supply: 5VDC from the USB port
Operating temperature: -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable length: solved USB cable
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Desktop - desktop model

108.54 €
Item numberRFID-R5USB-D10
On the way in
RFID reader 125kHz EM400x, 8 characters Decimal, USB Powered by USB

Keyboard emulation: 8 decimal places (HID)
frequency: 125 kHz EM 4001/4002
Power supply: 5VDC from the USB port
Operating temperature: -10 - +75°C 
Humidity during operation: waterproof
Reading range: 5 ~ 15 cm
Cable length: 164 cm
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
wall mounting, water resistant

102.51 €
Item numberRFID-R5USB
Physically in stock
RFID & QR Code Reader: 125kHz EM4100/4200, Wiegand 34, Wall Mounted

RFID EM-Marin and QR code reader
125kHz EM4100/4200
Reading as facing right
Built-in buzzer for sound notification
Can read multiple formats
With CPU watchdog
Power supply: 12V DC
Wiegand 26/34 bits
Dimensions: 125 x 83 x 30 mm

222.71 €
Item numberRFID-RM-QR
Physically in stock
IP68 RFID reader, 125kHz / 13.56MHz, Wiegand 26/34, only for access control with Wiegand

Waterproof RFID reader
only with Wiegand Interface
Connect to access controls with Wiegand
TAG Type: EM / Mifare
Reading distance: 5.8 cm
IP68
Frequency: 125kHz / 13,56MHz
LED and Buzzer
Cable out from the back
Detachable Backpiece
Supply Voltage: 12VDC
Dimensions: 86 x 86 x 22mm

237.98 €
Item numberRFID-MR-IP68
Physically in stock
USB MIFARE and EM RFID reader

Dual band RFID card reader for USB - 10 Decimal
125 kHz: EM-Marin EM41xx, EM4200
13,56MHz: Mifare - ISO14443A
HID - Keyboard Emulation
Reading distance: 5 to 8cm
Powered by USB
USB interface
operating temp. -10 ° to + 70 ° C
dimensions: 98 x 63 x 10mm (L x B x H)

136.81 €
Item numberRFID-D5USB-D10A
Physically in stock
RFID reader 125kHz, Waterproof - Dec 8 digits, 32bit, HID - keybord emulation

Keyboard emulation: 8 digits, 32bit Decimal
Frequency: 125kHz EM4xxx
Power supply: 5VDC from USB port
Operating temperature : -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable: Fixed USB cable from bottum - epoxy filled
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Waterproof - IP67

128.91 €
Item numberRFID-R51EUSB-D8
On the way in
RFID Card Reader 125kHz 13.56MHz USB Dual Frequency Access

125KHz and 13.56MHz RFID card reader
Versions: 125KHz, 13.56MHz or both
Reads TK4001/EM4100 ID cards
Reads MF S50/S70 14443A IC cards
Reading distance: 0-80mm
Reading speed: 0.2s
USB interface, USB powered
Card number output to text editors
Default output: first 10 bits
Working current: 100mA
DC 5V (+/-5%)
98 x 63 x 10 mm

93.80 €
Item numberRFID-D5USB-IDIC
Physically in stock
Showing 1-19 of 19 item(s)