Temperature sensor / Transmitter

Temperature sensor / Transmitter

Temperature sensor / Transmitter
There are 28 products.
Environmental monitoring station to the premises for the measurement of CO CO2, temperature, humidity. APP

CO2 - CO - temperature - humidity
measurement of carbon monoxide and carbon dioxide
alarm device at high concentration
color LCD display with touch
CO 9-1000 ppm
CO2 0-9999 ppm
Electrochemical sensors (NDIR CO2 sensor)
temperature of -10 - + 50 ° C, humidity 0 to 100% RH
Up to 450,000 logs with date and timestamps
APP: iOS APP and Android APP, powerful software
DCON, Modbus RTU / TCP and MQTT protocols
RS-485 2-wire / Ethernet RJ45
Relay output for local alarm or building management
Power supply: PoE and 12 - 48VDC ca. 3.5Watt
IP43 sealed enclosure (CO2 + temperature sensor)
Dimensions: 114 x 106 x 56 mm
DIN or wall mounting bracket

812.31 €
Item numberET-AIRCOCO2TH-I
Physically in stock
6-ch RTD Input Module for 2/3-wire Pt100, Pt1000 with16 bit res., MODBUS RTU,

6 RTD Inputs for Temperature sensor
Lead Resistance Elimination for 3-wire Connection
High Resolution: 16-bit
Open Wire Detection
Built-in Dual Watchdog
RS485 MODBUS RTU
Baud rate: 1200 - 115,2kbps
Supply voltage: 10 - 30VDC
Temp: -25 - +75°C
Dim: 123 x 72 x 36 mm
DIN-mount

422.37 €
Item numberMOD485-RTD6-I
Physically in stock
Pt100 transmitter - 2 or 3 conductor, 4-20mA output. Temperature from -50 to 150°C

Pt100 transmitter from sensor to 4-20mA

Working voltage: 24VDC

Accuracy: +/- o.2% full scale

Temperature range: -50 - +150°C

Dimensions: Ø45 mm

Plastic

Weight: 25g

Clamping: Center hole

Zero point adjustment

Adjustment of amplitude

15.81 €
Item numberDC-TEMP-MA-50150
Physically in stock
Cabinet Thermostat 0 to 60°C, 230VAC DIN mounting close contact NO function

Thermostat 0 to 60°C
Snap-Action switch
Dimensions 60 x 33 x 43
Max. starting current AC 10
Max. switching capacity NC: 10 A resistive / 2 A inductive @ AC 250 V
(Special specifiction are welcome)

23.99 €
Item numberREL-TEMP-NO
Physically in stock
Cabinet Thermostat for DIN rail mount 0 → +60 °C, NC normally Closed, 120Vac 230Vac Temprature control

Compact design
Wide adjustment range
DIN Rail mountable 35mm 
Thermostat 0 to 60 °C
Snap-Action Contact
Housing plastic, UL 94V-0, light gray
Max. inrush current AC 16 A for 10 seconds
Max. switching capacity NC: 10 A resistive / 2 A inductive @ AC 250 V, NO: 5A resistive / 2A inductive@250V 15A resistive/2A inductive@AC120V DC30W(DC24-72V)
IP20
Dimensions 60 x 33 x 43

23.99 €
Item numberREL-TEMP-NC
Physically in stock
Pt1000 transmitter -50 - +300°C for 2 wire and 3 wire Pt1000 sensor, 4-20mA

Thermal resistance current transmission module for Pt1000
Power supply: 16 - 36VDC (two-wire loop power supply)
Output: 4 - 20mA
Connect I+ and GND I- to A/D input.
If A/D input is 0-10V, connect 125ohm across input
It will give 0-10V across the 125ohm resistor
For 2 - 3 lead platinum resistance PT1000 temperature sensor
Additional Pt1000 temperature sensor
Accuracy: 0.2% FS Related to the accuracy level of the connected platinum resistor
Dimensions: see drawings

38.73 €
Item numberDC-TEMP-MA-PT1000
Physically in stock
Irreversible Temperature Strips 40-49°C Range, °C and °F

Irreversible temp recording strips
Temperature range 40-49C (105-120F)
Indicator points: 40, 43, 46, 49C
Indicator points: 105, 110, 115, 120F
Dual scale C and F
Changes white/grey to black at rating
Tolerance: 1C
Adhesive: acrylic
Carrier and covering film: polyester
Shelf life 12 months, refrigerated
Apply to dust and grease free surface

2.01 €
Item numberTEMP-SEN40-49
Physically in stock
Showing 21-28 of 28 item(s)