Item number ET-LUXMULTI-I

Light, Temperature and Humidity sensor with MODBUS RTU/TCP, Ethernet, RS485, IP20. measuring unit for energy management

Indoor light meter, temperature and humidity sensor 3 in 1

For energy optimization and building automation systems

Illumination measurement range: 0 to 20,000 lux

Temperature measurement range: -20 to +60°C

Humidity measurement range: 0 to 100% RH

Supports DCON and Modbus RTU/TCP protocols

Supports MQTT protocol for Ethernet interface

With RS485/RJ45 Ethernet communication interface

Relay output - 6 Amp@250VAC

Supply voltage: PoE and 10 - 48VDC, approximately 2 Watts

Operating temperature: 0 - +75°C

Web configuration and firmware update via Ethernet

Ceiling mounting

201.00 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

ET-LUXMULTI-I can be used to measure indoor lighting, temperature and humidity. A wide range of interface connections can be selected to suit individual needs, including RS-485/Ethernet. With the DCON and Modbus RTU/TCP protocols, it can be easily integrated into existing HMI/SCADA/central control systems.

The screwless quick connect connector, DIP switch and rotary switch make the module easy to install, repair and maintain. The white design ensures that the device is easy to match with interior design. With 3G/4G communication module and electric curtain control, these can be easily set up via a simple web interface and logic control.

2-way interconnected devices integrate the electric curtains and the Building Management System (BMS) and collect environmental sensitive data simultaneously. When detecting the indoor temperature or humidity increases, or the sun intensity is strong, the module will notify the management system which will then automatically activate the electric curtain's pulling movement or activate a personalized scenario to control all curtains or specific curtain combinations. In addition, the user can edit

the scenario and set up curtain automation at scheduled times.

Rev: LO