There are 86 products.
Ethernet based module with MODBUS TCP/IP with 2 x digital input 2 x power relay

Ethernet I/O module Modbus/TCP / UDP slave
1 x RJ45 Ethernet
Redundant Power Supply
Protocol: TCP, UDP, HTTP, DHCP, BOOTP and TFTP
Web configuration and firmware update via Ethernet
2 x digital input (Wet - volts supplied)
2 x Relay, COM, NO - 250VAC 5A, 30VDC 5A
Avoid inductive load to relay contacts
With locked DI and 32-bit 3.5kHz counter
With I/O pair - input is mirrored in the other's output
Dual-watchdog with Power-on-safe value
Supply voltage: 12 - 48VDC, 1.7 Watt
Dimensions: 98 x 52 x 27 mm
Operating temperature: -25 - +75°C

129.31 €
Item numberETH-MOD2I2R-I
Physically in stock
Modbus I/O Module with 8 x Digital Input Wet / Dry, 8 x Digital Output, with P2P

Modbus / TCP I / O module with built-in Web server
Modbus / TCP and Modbus / UDP protocols
2 x RJ45 Ethernet switch to Daisy-Chain topology
Dual Watchdog
Operating temperature range: - 25 to + 75 ° C
I / O Pair connection - Ingang refles in the second's exit
8 x Digital input: Wet (Apply Volt), Dry (Contact) - Digital Input: 0 - + 50CDC or Open / GND
8 x Digital Outout, Open Collector 0 - 40VDC / 650MA
Dimensions: 76 mm x 120 mm x 38 mm
Supply voltage: 12 - 48vdc, 4 watt
your bracket Wall mounting

399.59 €
Item numberETH-MOD8I8O
On the way in
ICPDAS tPET-P2R2 is a module with 2 x digital input (wet), 2 x power relay output Ethernet, 32bit counter. PoE

Ethernet I/O module Modbus/TCP / UDP slave

1 x RJ45 Ethernet

Power supply: PoE or 12 - 48VDC

Protocol: TCP, UDP, HTTP, DHCP, BOOTP and TFTP

Web configuration and firmware update via Ethernet

2 x digital input (Wet - volt supplied)

2 x Relay, COM, NO - 250VAC 5A, 30VDC 5A

Avoid inductive load on relay contacts

With locked DI and 32-bit 3.5kHz counter

With I/O pair - input is mirrored in the other's output

Dual watchdog with Power-on-safe value

Power: 1.7 Watts

Dimensions: 98 x 52 x 27 mm

Operating temperature: -25 - +75°C

142.44 €
Item numberETH-MOD2I2R-P-I
On the way in
ICPDAS I-7058 is a module with 8 digital inputs. Both for DC and AC volt. RS485.

RS485 Module - Slave, with digital input
8 x digital inputs for DC and AC
Voltage monitoring
input voltage: 80 - 250VAC / DC
Supply: 10 -30vdc

155.57 €
Item numberM485-DI8AC-I
Physically in stock
Opto-Isolated Digital I/O Module: 4 Inputs, 8 Outputs, RS485

8 digital outputs and 4 digital inputs
Open Collector Output
Photocouple Isolation
Digital input channels can be used as 16-bit counters
Configurable Power-on Value settings
Configurable settings for sure value
3750 Vrms insulation voltage
Dual Watchdog
Wide operating temperature range: -25 to + 75 ° C

171.12 €
Item numberM485-DIO4-I
Physically in stock
ICPDAS I-7065 Relay box with 5 x relay closing contact - 4 x digital inputs. RS485 bus

RS485 I/O module with 4 digital inputs and 5 relay outputs

4 x Digital input (wet) active with voltage in

Digital input as 16 bit counter - 100Hz

5 x Relay output - COM, NO

Supply: 10 - 30VDC

YOUR

162.01 €
Item numberM485-REL5-I
Physically in stock
SCSI cable Cable with 2 x DB100 male, 1 meter

1 meter kabel til brug mellem I/O-kort og TERM100S

168.44 €
Item numberKS-DB100MM-MM
Physically in stock
Cable with 2 x DB100 Han, 3M

3,0 meter kabel til brug mellem I/O-kort og TERM100S

235.97 €
Item numberKS-DB100MM-MM3
Physically in stock
Cable with 2 x DB100 Han, 5m

5,0 meter kabel til brug mellem I/O-kort og TERM100S

279.66 €
Item numberKS-DB100MM-MM5
Physically in stock
ICP DAS I-7080 is a 2 channel frequency counter module with 2 inputs, max. 100kHz. 32 bits count. 2 x digital output.

RS485 Frequency counter with 2 digital outputs
2 x counter entrance Max. 100kHz
input is Wet / Sink - Max + 30volt
32 bit counter - count up
for frequency and pulses
2 X Digital Output - Open Collector (OC)
Max. OC voltage: 30VDC / 30MA
Supply voltage: 10 - 30VDC
Dim: 123 x 72 x 35 mm
Operating temperature: -25 - + 75 ° C

217.75 €
Item numberM485-COUNT-I
On the way in
Ethernet module with 2 contact inputs, 1 relay output, with P2P function. I / O mirroring. PoE.

Ethernet module with 2 digital inputs and 1 relay output
2 x digital dry contact - active high by connecting contact
1 x Power relay, 250vac / 5a, 30vdc / 5a
Avoid inductive load to relay
P2P Function that reflects an input to other module output
Supports Modbus / TCP and UDP Slave
Power supplied from PoE or 12 - 48VDC
PoE: IEEE802.3af, Class 1
Operating temperature: - 25 - + 75 ° C
Dim: 98 x 52 x 27 mm
DIN bracket

151.82 €
Item numberETH-MOD2I1R-P-I
Physically in stock
ICP DAS I-7024R-G is a 4 x analog output module, 0 - +/- 10V and 0 - 20mA, 14bit. 5 x digital input with DRY - Contact

RS485 module with volt / mA output. Digital input
4 x analog output - 0 - +/- 10V and 0-20mA
Resolution: 14bit
5 x Digital input - Active high on contact for frame
RS485 Bus - Module is Slave
Format: (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate: 1200 ~ 115200 bps
Supply: 10 ~ 30 VDC

415.27 €
Item numberM485-DA4DI5-1
Physically in stock
ICP DAS I-7052 module with 8 optoisulated digital inputs. 6 is balanced and 2 with a common gnd.

RS485 Slave module with 8 digital inputs
6 pcs. Balanced
2 pcs. With joint GND.
Sink and Source Inputs
16 Bit Counter
RS485 Bus
Supply voltage: 10 - 30VDC
Dim: 123 x 72 x 35 mm

180.23 €
Item numberM485-DI8-I
Physically in stock
1 x analog ind, 1 x digital ind, 2 x digital ud, display, RS485 bus...

RS485 Module for measuring voltage and power
is with 15VDC transmitter output for power loop
1 x analog input 0-20MA, 0 - +/- 10V
1 x digital input. High is closed Contact
2 x Digital output (Open Collector) + 50VDC / 30mA
Supply voltage: 10 - 30VDC
Dim: 123 x 72 x 35 mm

382.84 €
Item numberM485-AD16UD-I
On the way in
Protection lid to DIO-XX radio modules

Accessories
Protective cover
for DIO-RXX and DIO-TXX

34.97 €
Item numberDIO-KAB
Physically in stock
Showing 41-60 of 86 item(s)