Item number ETH-MOD2I2R-I
Ethernet Module with Modbus TCP/IP. 2 x digital input, 2 x power relay output, I/O Pair connection, 12 - 48VDC
Ethernet I/O module Modbus/TCP / UDP slave
1 x RJ45 Ethernet
Redundant Power Supply
Protocol: TCP, UDP, HTTP, DHCP, BOOTP and TFTP
Web configuration and firmware update via Ethernet
2 x digital input (Wet - volts supplied)
2 x Relay, COM, NO - 250VAC 5A, 30VDC 5A
Avoid inductive load to relay contacts
With locked DI and 32-bit 3.5kHz counter
With I/O pair - input is mirrored in the other's output
Dual-watchdog with Power-on-safe value
Supply voltage: 12 - 48VDC, 1.7 Watt
Dimensions: 98 x 52 x 27 mm
Operating temperature: -25 - +75°C
129.31 €
Excl. VAT
Quantity
Physically in stock
Specifications
| Forsyning | 12 - 48 VDC 2 W |
|---|---|
| Indgang | 2 stk. isolerede med fælles stel Logisk 0: 0 – 4 V Logisk 1: 10 – 50 V |
| Isolation | 3750 VDC |
| Konfiguration | Via webbrowser |
| Stik | Skrueterminaler |
| Udgange | 2 relæer Type A (slutte) Belastning: 30 VDC / 5A maks. pr. kanal 250 VAC / 5A maks. pr. kanal |
| Watchdog | 2 stk. Wachdog timer. Den ene bruges til at genstarte modulet, hvis det fryser/låser. Den anden kan sætte udgangene til en forud bestemt værdi ved kommunikationsfejl |
| Dimensioner | 52 x 27 x 98 mm |
With various digital I/O functions, the ETH-MOD series is an IP-based Ethernet I/O monitoring and control module. The module can be controlled remotely via Ethernet network using Modbus/TCP protocol. This makes the ETH-MOD series perfect integration with HMI, SCADA, PLC and other software systems.
The functionality of the ETH-MOD series is almost the same as the ETHIOxx series. ETH-MOD is the mini Ethernet I/O modules of the series which support various I/O types, such as Photoisolated digital input, relay contact. The module can be used to create a DI to DO-pair connection via Ethernet. Once the configuration is complete, the ETH-MOD serial module can tune the status of the local DI channels and then use the Modbus / TCP protocol to continuously write to an external DO device in the background.
ETH-MOD has double watchdog which automatically resets itself when the built-in firmware runs abnormally. The host watchdog monitors the host controller (PC or PLC) and the output of the module can go to predefined state (safe value) when the host fails.
For maximum space savings, the ETH-MOD series is offered in an amazingly small form factor that makes it easy to install anywhere, even directly embedded in a machine. It is equipped with two removable terminal block connectors for easy connection and has a powerful 32-bit ARM MCU.
Other products in the same category:
Web-based I/O module with 16 digital inputs with DRY contact and 2 port Ethernet switch
16 digital inputs with isolation
Inputs with common frame GND)
DRY input is High at 0VDC on the input.
Built-in 2 port Ethernet switch.
Several devices sit on the same network cable - daisy chain
I/O Pair connection - input is mirrored in the other's output
306.59 €
Item number:ETHI16-2I
Network Module with Digital I / O Korenix Jeti / O 6550
Network module with digital I / O Korenix JETI / O 6550
Channels: 14/8
Digital inputs: 14 pcs., Logic 0: 0 - 4 V, Logic 1: 5 - 30V
Digital outputs: & nbsp; 8 pcs. Open collector, 5 - 40 V 250mA
Isolation: Optical 2500 VRMS for analog and digital inputs and outputs for the power supply
Magnetic 1500 V from the network interface for the power supply
10/100 Mbit m / RJ45 their connector
Operating temperature: - 25 ° C - 70 ° C
Supports Modbus / TCP, OPC server, SNMP. Software included for configuration
For DIN rail mounting
Supply: 10 - 30 VDC via terminal block, Max 1.92 W
186.80 €
Item number:ETHIO14D8D-K
16 Channel digital input (Wet / Dry) Ethernet, 2 x LAN Daisy-Chain. Modbus TCP/IP, MQTT, -25 - +75°C
16 x digital input over Ethernet / MQTT
input voltage: Up to + 50VDC
Built-in Web server
Modbus TCP / UDP and MQTT protocols
2 Ports Ethernet switch (LAN Bypass ) To Daisy-Chain
Double watchdog (programmable)
I/O-Pair connection (push and poll)
support web configuration and firmware update via Ethernet
16 x input channels for Wet switch and DRY switch
Wet is active at voltage in
Dry is active at closing contact
LED display To display I / O status
Dim: 127 x 99 x 33 mm
Supply voltage: 10 - 48VDC / 3W
263.71 €
Item number:ETHIO16DI-2MQ
8 channel Digital input (Wet/Dry), 8 channel Digital output, Ethernet, 2 x LAN Daisy-Chain. Modbus TCP/IP, MQTT, -25 - +75°C
8 x Digital input over Ethernet / MQTT
8 x Digital output over Ethernet / MQTT
Input voltage: up to +50VDC
Built-in Web Server
Modbus TCP/UDP and MQTT protocols
2 port Ethernet switch (LAN Bypass) for Daisy-Chain
Double watchdog (programmable
I/O-pair connection (Push and Poll)
Supports web configuration and firmware update via Ethernet
8 x input channels for Wet contact and Dry contact
Wet is active when voltage is applied
Dry is active at closing contact
LED display to show I/O status
Dimensions: 127 x 99 x 33 mm
Supply voltage: 10 - 48VDC / 3W
315.57 €
Item number:ETHIO8DI8DO-2MQ
16 x digital inputs Dry contact input, 32bit counter 100Hz, 2 x RJ45, Modbus/TCP/UDP, POE and 12 - 48VDC
Built-in Web server
Web HMI
Modbus TCP and Modbus UDP protocols
Good communication security
Dual Watchdog
Operating temperature range: -25 ~ + 75 ° C
I / O Pair - Input - Input Mirrors in the second's output
16 x Digital input (counter): Contact to input, DRY
2 x RJ45 Ethernet - Daisy Chain
Supply voltage: POE or 12 - 48VDC / 3.2Watt
311.01 €
Item number:ETHI16-P2I
High Speed 8 analog inputs 200 kHz sample rate, 16-bit, 4 digital outputs, 4 digital inputs, -25 - + 75 ° C, PoE, 12-48VDC
8 single ended input +/- 10V analog, +/- 5V
200kS / s (200 kHz) for each channel sampling rate
FIFO 2000 is sampled - the memory of 30 million data samples
16bit solution
Trigger mode: SW, Ext. clock, digital falling edge (post, pre, delay), analog
1 x 32-bit counter, max. 30 kHz
4 x digital input (wet) up to + 30VDC
4 x digital output (Open Collector) up to + 30VDC, 100mA
Overload protection up to 1.3A
1 x Ethernet port RJ45
Security: ID, password and IP filter
Powered by the PoE or 12 - 48VDC, 2,6W
Dimensions: 120 x 76 x 38 mm
Housing: Metal, with DIN bracket
Operating temperature: -25 - + 75 ° C
892.98 €
Item number:ETHIO8AI8IO-P-I








