Item number CHANN-TTL-REPEA-MODUL

8-ch PWM Output and 8-ch High-speed Counter Input Module (5 VDC), RS-485, DCON

8 x TTL channels, Sink/Source
8 x Counter/Encoder input, 32-bit
Counter max. speed 1 MHz
1 x RS-485, DCON protocol
Baud rate 1200-115200 bps
Frequency output 1 Hz - 500 kHz
Intra-module isolation 2500 VDC
ESD +-4kV, EFT +-4kV protection
Battery backup and watchdog timer
10-30VDC input, 2.9W
72 x 123 x 35 mm
-25 to 75C (special components required)

265.32 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type CounterTTL
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication
Ports 1 x RS-485
Input Range +10 ~ +30 VDC
Consumption 2.9 W
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 2500 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
Channels 8
Sink/Source (NPN/PNP) Sink, SourceSink
ON Voltage Level +3.5 ~ +5 VDC
OFF Voltage Level +1 VDC Max.
Load Voltage +5 VDC
Load Current Sink: 10 mA @ 5V /channelSource: 1 mA @ 5V /channel
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1), (N, 8, 2), (E, 8, 1), or (O, 8, 1)
Protocol DCON
Mode Burst, Continuous
Battery Backup Yes
Frequency 1 Hz ~ 500 kHz
Counter/Encoder Bits 32-bit
EFT (IEC 61000-4-4) ±4 kV for Power Line
Max. Speed 1 MHz
Counter Mode Up
Duty Cycle 0.1 ~ 99.9 %
Burst Count 1 ~ 65535
Trigger Start Hardware or Software

Repeater Module

This repeater module is designed for robust signal transmission and counting in industrial environments. It is used to amplify and forward TTL signals and to register events through digital counting, communicating via RS-485 with the DCON protocol.


8 x TTL channels · 8 x 32-bit counter/encoder · RS-485 DCON · -25 to 75C


Features that ensure reliable operation

  • 8 TTL channels - supports both sink and source configuration
  • 32-bit counter/encoder - high resolution at speeds up to 1 MHz
  • 2500 VDC isolation - protects against noise between modules
  • ESD and EFT protection - resistant to electrical disturbances
  • Battery backup and watchdog timer - ensures stable operation during power fluctuations


Application areas in industrial equipment

The module is well suited for tasks requiring signal amplification and precise counting in demanding environments.

  • Production lines with pulse counting
  • Monitoring of encoder signals
  • Distributed I/O systems via RS-485
  • DIN-rail mounted automation


A robust and versatile solution for reliable signal handling in industrial systems.