Item number REMOT-MODUL-CH-ANALO

Remote I/O Module with 4-CH Analog Input, 5-CH DI, 4-CH Relay Output, RS-485

4 x Differential Analog Input
Voltage/Current, 16-bit Resolution
5 x Digital Input, Wet Contact
4 x Power Relay Output, Form A
1 x RS-485, Modbus RTU/DCON
5-Digit 7-Segment LED Display
Intra-module Isolation 2500VDC
Programmable Watchdog Timer
10-30VDC Power Input, 1.8W
72 x 123 x 35 mm
-25 to 75C (special components required)

326.96 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 3750 VDC
Type VoltageCurrentPower Relay (Form A)Wet Contact5-Digit 7 Segment LED Display
Operating Temperature 25 ~ +75 °C
Resolution 16-bit
Range Voltage: ±150 mV, ±500 mV, ±1 V , ±5 V, ±10 VCurrent: ±20 mA , 0 ~ 20 mA, 4 ~ 20 mA (Jumper selectable)
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication
Ports 1 x RS-485
Input Range +10 ~ +30 VDC
Consumption 1.8 W
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 2500 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
Channels 44 Differential5
Accuracy Normal Mode: 0.1% of FSRFast Mode: 0.5% of FSR
Sampling Rate Normal Mode: 10 HzFast Mode: 60 Hz
Input Impedance Voltage: 2 MΩCurrent: 139 Ω10 kΩ
Overvoltage Protection ±70 VDC240 Vrms
Safe Value Programmable
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +10 ~ +50 VDC
OFF Voltage Level +4 VDC max.
Power on Value Programmable
Baud Rate 1200 ~ 115200 bps
Individual Channel Configuration Yes
Data Format (N, 8, 1)
Protocol Modbus RTU, DCON
Contact Rating 5 A @ 250 VAC5 A @ 30 VDC
Operate Time 6 ms
Release Time 3 ms
Electrical Endurance 10^5 ops.
Mechanical Endurance 2 x 10^7 ops.
Common Voltage Protection ±200 VDC
Frequency 50 Hz
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±3 kV for Power Line
Max. Counts 65535 (16-bit)

Repeater Module

This repeater module is a rugged I/O solution for industrial data acquisition and control, combining analog inputs, digital inputs, and relay outputs in a single DIN-rail unit. It is built for reliable operation in demanding industrial environments via RS-485 communication.


4 x Analog Input · 5 x Digital Input · 4 x Relay Output · RS-485 Modbus RTU/DCON


Features for stable operation

  • Differential analog inputs -supports voltage and current with 16-bit resolution
  • High isolation -2500 VDC intra-module isolation protects against noise and transients
  • Programmable watchdog -ensures automatic recovery from communication faults
  • Power relay outputs -4 channels rated at 5A for controlling external equipment
  • LED status display -5-digit 7-segment display for quick status readout


Application areas in industry

The module suits automation tasks where reliable signal processing and robustness are essential.

  • Process monitoring in factory environments
  • Remote control of pumps and motors
  • Data acquisition from sensors and transmitters
  • Integration with SCADA and PLC systems


A robust and flexible solution for industrial I/O communication that meets demands for high isolation and stable operation.