Item number REMOT-MODUL-DIGIT-INPUT

Remote I/O Module 3 x Digital Input, 3 x Relay Output, RS-485

3 x Digital Input, Dry Contact
3 x Relay Output, Form A (SPST N.O.)
1 x RS-485, DCON/Modbus RTU/ASCII
Baud rate 1200 - 115200 bps
Counter 65535 (16-bit), 100 Hz
Programmable watchdog timer
Reverse polarity protection
Intra-module isolation 3750 VDC
10 - 30VDC, 0.9W max.
52 x 98 x 27 mm
-25 to 75C (special components required)

88.44 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type Power Relay, Form A (SPST N.O.)Dry Contact
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication
Ports 1 x RS-485
Consumption 0.9 W max.
Dimensions (mm) 52 x 98 x 27 (W x L x H)
Storage Temperature 30 ~ +75 °C
Humidity 10 ~ 95% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 3750 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 3
Safe Value Programmable
Powered from Terminal Block 10 ~ 30 VDC
Sink/Source (NPN/PNP) Source
ON Voltage Level Close to GND
OFF Voltage Level Open
Power on Value Programmable
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1), (N, 8, 2), (O, 8, 1), (E, 8, 1)
Protocol DCON, Modbus RTU, Modbus ASCII
Operate Time 6 ms
Release Time 3 ms
Electrical Endurance VDE: 5 A @250 VAC 30,000 ops (10 ops/minute) at 75°C5 A @30 VDC 70,000 ops (10 ops/minute) at 75°CUL:5 A @250 VAC/30 VDC 6,000 ops3 A @250 VAC/30 VDC 100,000 ops5 A @30 VDC 70,000 ops (10 ops/minute) at 75°C
Mechanical Endurance 20,000,000 ops at no load (300 ops/minute)
Frequency 100 Hz
EFT (IEC 61000-4-4) ±4 kV for Power
Max. Counts 65535 (16-bit)
Min. Pulse Width 5 ms

Repeater Module

This repeater module is a rugged I/O solution for industrial automation, combining digital inputs with relay outputs over an RS-485 connection. It is used for remote control and monitoring in production plants and process industries where reliable signal transmission is essential.


3 x Digital Input · 3 x Relay Output · RS-485 · DIN-Rail


Features and Benefits

  • Dry contact inputs -reliable detection of digital signals
  • Power relay outputs -dependable control of external loads
  • Programmable watchdog -automatic recovery from communication faults
  • High isolation of 3750 VDC -protects against noise and voltage spikes
  • Wide operating temperature range -reliable operation in demanding environments


Applications

The module is well suited for industrial environments requiring stable data transmission and rugged hardware.

  • Remote control of relay-based systems
  • Monitoring of digital sensors
  • Automation in production lines
  • Integration into SCADA and PLC systems


A dependable choice for robust digital I/O control via RS-485 in industrial settings.