Item number CHANN-ANALO-INPUT-MODUL-7

8-Channel Analog Input Module, RS-485 Modbus RTU/DCON, 16-bit

8 x Differential Analog Input
Current: +-20mA, 0-20mA, 4-20mA
16-bit Resolution
Accuracy +-0.1% of FSR
Sampling Rate 10 Hz
1 x RS-485, 1200-115200 bps
Modbus RTU, DCON Protocol
3000 VDC Intra-module Isolation
DIN-Rail Mounting
10-30VDC
-25 to 75C (special components required)
72 x 123 x 35 mm

284.08 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type Current
Operating Temperature 25 ~ +75 °C
Resolution 16-bit
Range ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication
Ports 1 x RS-485
Input Range +10 ~ +30 VDC
Consumption 1.3 W
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 3000 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
Channels 8 Differential
Accuracy ±0.1% of FSR
Sampling Rate 10 Hz
Input Impedance Current: 125 Ω
Baud Rate 1200 ~ 115200 bps
Overcurrent Protection 50 mA at 110 VDC
Data Format (N, 8, 1), (N, 8, 2), (E, 8, 1), or (E, 8, 2)
Protocol Modbus RTU, DCON
Open Wire Detection For 4 ~ 20 mA only
Common Voltage Protection ±15 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±0.5 kV for Power Line

Analog Input Repeater Module

This repeater module is designed for precise measurement of analog current signals in industrial automation systems. The module collects data from up to eight channels and forwards it via RS-485 to a host control system. It is typically used for monitoring sensors and process equipment in demanding industrial environments.


8 differential channels · 16-bit resolution · RS-485 Modbus RTU/DCON · -25 to 75C operation


Features that ensure reliable operation

  • High isolation -3000 VDC intra-module isolation protects against noise and transients
  • Protection circuits -built-in EFT, ESD and surge protection per IEC standards
  • Programmable watchdog -monitors communication and automatically restarts on failure
  • Open wire detection -detects breaks in 4-20 mA signals
  • Flexible configuration -supports multiple baud rates and data formats


Application areas in industry

The module suits tasks where stable data acquisition from analog sensors is critical to operation.

  • Process monitoring in factory automation
  • Temperature and pressure measurement via 4-20 mA transmitters
  • Distributed I/O systems on DIN rail
  • Industrial SCADA and PLC integrations


A robust and accurate choice for reliable analog data acquisition in industrial environments.