Item number REPEA-MODUL-4X-DC

4-ch Isolated (Wet, 4~30 VDC) DI and 5-ch DC-SSR Output Module, RS-485, DCON/Modbus RTU

4 x Digital Input, Wet Contact
5 x DC-SSR Output, Form A
Contact Rating 3-30VDC @ 1A
1 x RS-485, Modbus RTU, DCON
Baud Rate 1200-115200 bps
Programmable Watchdog Timer
Intra-module Isolation 3750VDC
ESD +-4kV Contact, +-8kV Air
Input Range 10-30VDC, 0.6W
72 x 123 x 35 mm
25 to 75C (special components required)
DIN-Rail Mounting

166.16 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type DC-SSRWet Contact
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication
Ports 1 x RS-485
Input Range +10 ~ +30 VDC
Consumption 0.6 W
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 3750 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 45 (Form A)
Input Impedance 3 kΩ
Overvoltage Protection ±35 VDC
Safe Value Programmable
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +1 VDC max.
OFF Voltage Level +4 ~ +30 VDC
Power on Value Programmable
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1), (N, 8, 2), (E, 8, 1), or (O, 8, 1)
Protocol Modbus RTU, DCON
Contact Rating 3 ~ 30 VDC @ 1A
Operate Time 1 ms
Release Time 1 ms
Electrical Endurance Long Life, No Arcing, No Bounce, No Switching Noise
Leakage Current 0.1 mA
Frequency 100 Hz
EFT (IEC 61000-4-4) ±2 kV for Power Line
Max. Counts 65535 (16-bit)
Min. Pulse Width 5 ms

Repeater Module

This repeater module is designed for industrial signal repetition and connectivity between digital inputs and relay outputs via an RS-485 network. It is used to monitor and control external devices in automation systems that require high reliability.


4 x Digital Input · 5 x DC-SSR Output · RS-485 Modbus RTU · 10-30VDC


Features that ensure stable operation

  • Wet Contact Input - supports sink/source signals with programmable counting up to 65535
  • DC-SSR Output - long life with no arcing, bouncing, or switching noise
  • Programmable Watchdog - monitors both module and communication for increased reliability
  • Overvoltage and EFT Protection - robust against electrical disturbances in industrial environments
  • Reverse Polarity Protection - prevents damage from incorrect power connection


Applications in industrial systems

The module fits applications where digital signals need to be repeated, monitored, and controlled via a Modbus network.

  • Factory automation
  • Remote sensor monitoring
  • Pump and valve control
  • Distributed I/O systems


A robust solution for reliable signal repetition and control in demanding industrial environments.