Item number STRAI-GAUGE-MODUL-2X

Strain Gauge Module with 2x Analog Input, DI/DO, RS-485, LED Display

2 x Strain Gauge/Voltage/Current Input
Range: +/-15mV to +/-2.5V, +/-20mA
16-bit resolution, 0.05% FSR accuracy
1 x Digital Input, 4 x Digital Output
1 x Analog Output 0-10V, 16-bit
RS-485, Modbus RTU/DCON, 1200-115200bps
5-digit 7-segment LED display
Isolation 1500VDC, ESD/EFT protected
10-30VDC, 3.0W
72 x 123 x 35 mm
-25 to +75C (special components required)

368.50 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type Open CollectorFull-Bridge Strain GaugeVoltageCurrentDry Contact5-Digit 7 Segment LED Display
Operating Temperature 25 ~ +75 °C
Resolution 16-bit
Range 0 ~ +10 VVoltage: ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 VCurrent: ±20 mA
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication
Ports 1 x RS-485
Input Range +10 ~ +30 VDC
Consumption 3.0 W
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 1500 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 142
Accuracy ±0.05% of FSR
Sampling Rate 1-ch Mode: 10 Hz2-ch Mode: 2 Hz (total)
Input Impedance 3 kΩ
Overvoltage Protection ±5 VDC±30 VDC
Safe Value Programmable
Sink/Source (NPN/PNP) SourceSink
ON Voltage Level Close to GND
OFF Voltage Level Open
Load Voltage +3.5 ~ +50 VDC
Load Current 30 mA/Channel
Power on Value Programmable
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1), (N, 8, 2), (E, 8, 1), or (O, 8, 1)
Protocol Modbus RTU, DCON
Max. Load Current 40 mA
Frequency 50 Hz
EFT (IEC 61000-4-4) ±4 kV for Power Line
Max. Counts 65535 (16-bit)
Wiring 4-wire
Impedance 20 MΩ

Strain Gauge Module

This strain gauge module is designed for precise measurement of load, voltage and current in industrial applications. The module combines analog inputs with digital I/O and RS-485 communication, making it suitable for weighing and process monitoring.


2 x Strain Gauge/Voltage/Current Input · 16-bit resolution · RS-485 Modbus RTU/DCON · DIN-Rail mounting


Features that make the difference

  • High precision - 0.05% FSR accuracy on analog inputs
  • Flexible signal support - supports full-bridge strain gauge, voltage and current
  • LED display - 5-digit 7-segment display for direct readout
  • Robust protection - overvoltage protection and high ESD/EFT resistance
  • Digital I/O - 1 digital input and 4 digital outputs for control


Application areas

The module suits industrial environments where precise weighing and process control are critical.

  • Weighing systems and load cell monitoring
  • Process industry and automation
  • Quality control in production
  • Distributed I/O via RS-485 networks


With high accuracy and a robust design, this module is the right choice for reliable strain gauge measurement.