Item number CH-DIGIT-INPUT-MODUL

8-CH Digital Input Module RS-485, Modbus RTU, Wet Contact, DIN-Rail

8 x Digital Input, Wet Contact
Sink/Source (NPN/PNP) type
1 x RS-485, Modbus RTU, DCON
Baud rate 1200-115200 bps
Counter 65535 (16-bit), 100 Hz
Min. pulse width 5 ms
Intra-module isolation 3750 VDC
ESD +/-4kV contact, +/-8kV air
DIN-Rail mounting
10-30VDC, 1.0 W
72 x 123 x 35 mm
-25 to 75C (special components required)

139.36 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type I/O LED IndicatorWet Contact
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication
Ports 1 x RS-485
Input Range +10 ~ +30 VDC
Consumption 1.0 W
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 3750 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 8
Input Impedance 10 kΩ
Overvoltage Protection 100 VAC/VDC max.
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level 10 ~ 80 VAC±15 ~ ±80 VDC
OFF Voltage Level 3 VAC max.±3 VDC max.
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1), (N, 8, 2), (E, 8, 1), or (O, 8, 1)
Protocol Modbus RTU, DCON
Frequency 100 Hz
EFT (IEC 61000-4-4) ±4 kV for Power Line
Max. Counts 65535 (16-bit)
Min. Pulse Width 5 ms
Channel-to-Channel Isolation ±2 kV

Repeater Module

This repeater module is an industrial digital input module with 8 channels, designed for monitoring and counting digital signals in automation systems. It connects via RS-485 and supports standardized communication protocols for integration into existing SCADA and PLC systems.


8 x Digital Input · RS-485 Modbus RTU · DIN-Rail Mounting · -25 to 75°C


Features and Benefits

  • 8 wet contact channels - flexible connection of digital signals
  • Sink/Source support - compatible with both NPN and PNP sensors
  • Built-in counter - up to 65535 counts (16-bit) at 100 Hz
  • High isolation - 3750 VDC intra-module isolation for operational safety
  • Robust protection - ESD, EFT and overvoltage protection on all terminals


Application Areas

The module is well suited for industrial environments where reliable detection of digital signals is essential.

  • Monitoring contact status in production plants
  • Counting pulses from flow meters or sensors
  • Integration into Modbus-based automation systems
  • Remote monitoring via RS-485 networks


A reliable choice for robust digital signal transmission in demanding industrial environments.