Item number ANALO-INPUT-MODUL-10-5

Analog Input Module 10-Ch Differential, RS-485 Modbus RTU/DCON, 16-bit

10 differential / 20 single-ended inputs
Voltage and current input types
16-bit resolution
Accuracy 0.1% FSR (normal mode)
Sampling rate up to 60 Hz (fast mode)
RS-485 port, Modbus RTU / DCON
Baud rate 1200-115200 bps
3000 VDC intra-module isolation
Open wire detection for 4-20 mA
10-30VDC power input, 2.0 W
72 x 123 x 35 mm
-25 to +75C (special components required)

288.10 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type VoltageCurrent
Operating Temperature 25 ~ +75 °C
Resolution 16-bit
Range Voltage: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 VCurrent: ±20 mA , 0 ~ +20 mA, +4 ~ +20 mA (Jumper Selectable)
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication
Ports 1 x RS-485
Input Range +10 ~ +30 VDC
Consumption 2.0 W
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 3000 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
Channels 10 Differential or 20 Single-ended (Software Selectable, *Note 1)
Accuracy Normal Mode: ±0.1% of FSRFast Mode: ±0.5% of FSR
Sampling Rate Normal Mode: 10 HzFast Mode: 60 Hz
Input Impedance Voltage: 2 MΩ (Differential)Current: 125 Ω (Differential)
Overvoltage Protection 240 Vrms
Baud Rate 1200 ~ 115200 bps
Overcurrent Protection 50 mA at 110 VDC
Individual Channel Configuration Yes
Data Format (N, 8, 1)
Protocol Modbus RTU, DCON
Open Wire Detection For 4 ~ 20 mA only
Common Voltage Protection ±200 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±0.5 kV for Power Line

Analog Input Module

This analog input module is designed for precise measurement of voltage and current signals in industrial automation systems. The module communicates via RS-485 and supports both Modbus RTU and DCON protocols, making it well suited for integration into existing SCADA and PLC systems.


10 differential channels · 16-bit resolution · RS-485 Modbus RTU/DCON · 3000 VDC isolation


Features for reliable measurement

  • Flexible inputs - supports both voltage and current signals across multiple ranges
  • High accuracy - 0.1% of FSR in normal mode for precise readings
  • Software-selectable channels - 10 differential or 20 single-ended channels
  • Robust protection - overvoltage, overcurrent and ESD protection on every terminal
  • Open wire detection - identifies broken 4-20 mA connections automatically


Application areas

The module fits industrial environments where reliable data acquisition from sensors and transmitters is critical.

  • Process monitoring in production facilities
  • Distributed I/O in automation systems
  • Sensor integration in measurement setups
  • DIN-rail mounting in panels and cabinets


A robust and flexible choice for precise analog signal acquisition in demanding industrial environments.