Item number 16-CHANN-DIGIT-INPUT-12

16-ch Isolated (Wet, 10~80 VAC/±15~±80VDC) DI and 2-ch (Sink, NPN) DO Module, RS-485, DCON/Modbus RTU

16 x Digital Input, Wet Contact
2 x Isolated Open Collector Output
Sink/Source Input Type
1 x RS-485, Modbus RTU, DCON
Baud Rate 1200 - 115200 bps
Intra-module Isolation 3750VDC
Programmable Watchdog Timer
Reverse Polarity Protection
10-30VDC
76 x 121 x 42 mm
-25 to +75C (special components required)

174.20 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type Wet ContactIsolated Open Collector
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication
Ports 1 x RS-485
Input Range +10 ~ +30 VDC
Consumption 0.4 W
Dimensions (mm) 76 x 121 x 42 (W x L x H)
Storage Temperature 40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
Overload Protection 1.4 A
Short-circuit Protection Yes
Reverse Polarity Protection Yes
Intra-module Isolation 3750 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 162
Input Impedance 30 kΩ
Overvoltage Protection 120 VAC/VDC max.60 VDC
Safe Value Programmable
Sink/Source (NPN/PNP) Sink/SourceSink
ON Voltage Level 10 ~ 80 VAC±15 ~ ±80 VDC
OFF Voltage Level 3 VAC max.±3 VDC max.
Load Voltage +5 ~ +50 VDC
Load Current 600 mA/channel
Power on Value Programmable
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1), (N, 8, 2), (E, 8, 1), or (O, 8, 1)
Protocol Modbus RTU, DCON
Frequency 100 Hz
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
Max. Counts 65535 (16-bit)
Min. Pulse Width 5 ms

Repeater Module

This repeater module is designed to monitor and relay digital signals in industrial automation systems. It offers 16 digital inputs and 2 isolated outputs, communicating via RS-485 using Modbus RTU or DCON protocol. It is well suited for robust data acquisition in demanding environments.


16 x Digital Input · 2 x Isolated Output · RS-485 Modbus RTU/DCON · 3750VDC Isolation


Robust design for industrial use

  • High isolation -3750 VDC intra-module isolation protects against noise and voltage spikes
  • Flexible input -supports both sink and source configuration
  • Programmable watchdog -ensures stable operation during communication failures
  • Protection circuits -overvoltage, overload and short-circuit protection on outputs
  • Wide temperature range -operates reliably from -25°C to +75°C


Application areas

The module is suitable for monitoring and controlling digital signals in manufacturing plants, building automation and process industries.

  • Factory automation
  • Sensor and contact monitoring
  • Remote control via RS-485 networks
  • DIN-rail installation in cabinets


A reliable and robust solution for digital I/O handling in industrial networks.