Item number CHANN-ANALO-OUTPU-MODUL-13

2-Channel Analog Output Module, Voltage/Current, RS-485 Modbus RTU

2 x Analog Output, Voltage/Current
0-5V, 0-10V, 0-20mA, 4-20mA
12-bit Resolution
Accuracy +/-0.1% of FSR
1 x RS-485, Modbus RTU/DCON
Baud Rate 1200-115200 bps
Short Circuit Protection
Channel-to-Channel Isolation 2kV
Programmable Watchdog Timer
10-30VDC, 3.0W
72 x 123 x 35 mm
25-75C (special components required)

276.04 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type VoltageCurrent
Operating Temperature 25 ~ +75 °C
Resolution 12-bit
Range Voltage: 0 ~ +5 V, 0 ~ +10 VCurrent: 0 ~ +20 mA, +4 ~ +20 mA
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication
Ports 1 x RS-485
Input Range +10 ~ +30 VDC
Consumption 3.0 W
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 3000 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
Channels 2
Accuracy ±0.1% of FSR
Programmable Output Slope Voltage: 0.0625 ~ 1024.0 V/SecondCurrent: 0.125 ~ 2048 mA/Second
Readback Accuracy ±0.5% of FSR
Current Load Resistance Internal Power: 500 ΩExternal Power: 1050 Ω
Short Circuit Protection Yes
Power-on Value Programmable
Safe Value Programmable
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1), (N, 8, 2), (E, 8, 1), or (O, 8, 1)
Protocol Modbus RTU, DCON
DA Output Response Time 10 ms
Open Wire Detection For Current Only
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±0.5 kV for Power Line
Channel-to-Channel Isolation 2 kV

Analog Output Repeater Module

This repeater module converts digital commands into precise analog voltage or current output signals. It is designed for industrial control applications where stable and accurate analog signals are essential for process automation.


2 Analog Outputs · 12-bit Resolution · RS-485 Modbus RTU · DIN-Rail Mounting


Key Features

  • Flexible output types -supports both voltage (0-5V, 0-10V) and current (0-20mA, 4-20mA)
  • High accuracy -an accuracy of +/-0.1% of FSR ensures reliable output signals
  • Programmable watchdog -monitors communication and increases operational reliability
  • Short circuit protection -protects the module against damage from wiring faults
  • Galvanic isolation -3000 VDC module isolation and 2 kV channel-to-channel isolation protect against noise


Applications

The module is suitable for industrial environments where analog signals need to be generated or repeated over an RS-485 network.

  • Process automation
  • SCADA and remote monitoring
  • Industrial measurement and control
  • DIN-rail installations in production facilities


A robust and accurate solution for analog signal generation in demanding industrial environments.