Item number COUNT-MODUL-2X-FREQU

Counter Module with 2x Frequency Input, RS-485, LED Display

2 x Counter/Frequency Input, 32-bit
Max. Speed 100 kHz
2 x Digital Output, Open Collector
5-Digit 7 Segment LED Display
1 x RS-485, Modbus RTU, DCON
Baud Rate 1200 - 115200 bps
Battery Backup
Intra-module Isolation 3000 VDC
DIN-Rail Mounting
24 - 30VDC, 2.2 W
72 x 123 x 35 mm
-25 to 75C (special components required)

211.72 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type Open CollectorCounter, Frequency5-Digit 7 Segment LED Display
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication
Ports 1 x RS-485
Input Range +24 ~ +30 VDC
Consumption 2.2 W
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 3000 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
Channels 2
Sink/Source (NPN/PNP) Sink
ON Voltage Level Isolated: +3.5 ~ +30 VDCNon-isolated: +2.4 ~ +5 VDC
OFF Voltage Level +1 VDC Max.
Low Pass Filter 2 μs ~ 65 ms
Load Voltage +3.5 ~ +30 VDC
Load Current 30 mA/Channel
Baud Rate 1200 ~ 115200 bps
Individual Channel Configuration No
Data Format (N, 8, 1), (N, 8, 2), (E, 8, 1), or (O, 8, 1)
Protocol Modbus RTU, DCON
Battery Backup Yes
Counter/Encoder Bits 32-bit
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±0.5 kV for Power Line
Frequency Accuracy 1 Hz or 10 Hz
Max. Speed 100 kHz
Counter Mode Up
Programmable Threshold Voltage +0.1 ~ +5 VDC
Frequency Mode Yes

Repeater Module

This repeater module is designed for counting and frequency measurement in industrial automation systems. It converts and isolates signals so data can be reliably transmitted via RS-485 to a higher-level control system.


2 x Counter/Frequency Input · 32-bit · RS-485 Modbus RTU/DCON · DIN-Rail


Features that make a difference

  • 32-bit counter -high resolution for accurate frequency and pulse measurement
  • Up to 100 kHz -handles fast signals without data loss
  • Galvanic isolation -3000 VDC protects against noise and voltage spikes
  • LED display -5-digit readout for quick local monitoring
  • Battery backup -ensures data retention during power loss


Where it fits

The module is well suited for monitoring and control in demanding industrial environments.

  • Production lines with pulse counting
  • Motor speed monitoring
  • Flow measurement via frequency signals
  • Integration into SCADA/PLC systems


A robust and accurate solution for reliable counting and frequency measurement in industrial networks.