Item number REPEA-MODUL-4X-DIGIT-3

4-channel Isolation DI (Wet) and 4-channel Isolated DO (Source, PNP) Module, RS-485

4 x Digital Input, Wet Contact
4 x Isolated Open Collector Output
Counter Function up to 65535 (16-bit)
1 x RS-485, DCON/Modbus RTU/ASCII
Baud Rate 1200 - 115200 bps
Programmable Watchdog Timer
3750VDC Intra-module Isolation
Short-circuit and Overload Protection
10-30VDC Power via Terminal Block
52 x 98 x 27 mm
-25 to 75C (special components required)

127.30 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type Isolated Open CollectorWet Contact
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication
Ports 1 x RS-485
Consumption 0.5 W Max.
Dimensions (mm) 52 x 98 x 27 (W x L x H)
Storage Temperature 30 ~ +75 °C
Humidity 10 ~ 95% RH, Non-condensing
Overload Protection 1.4 A
Short-circuit Protection Yes
Reverse Polarity Protection Yes
Intra-module Isolation 3750 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 4
Input Impedance 10 kΩ, 0.66 W
Overvoltage Protection 70 VDC47 VDC
Safe Value Programmable
Powered from Terminal Block 10 ~ 30 VDC
Sink/Source (NPN/PNP) SourceSink
ON Voltage Level +4.0 ~ +50 VDC
OFF Voltage Level +1 VDC Max.
Load Voltage +10 ~ +40 VDC
Load Current 650 mA/channel
Power on Value Programmable
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1), (N, 8, 2), (O, 8, 1), (E, 8, 1)
Protocol DCON, Modbus RTU, Modbus ASCII
Frequency 100 Hz
EFT (IEC 61000-4-4) ±4 kV for Power
Max. Counts 65535 (16-bit)
Min. Pulse Width 5 ms

Repeater Module

This repeater module is designed to extend and reinforce digital signals in industrial automation systems. It is used to monitor digital inputs and control external devices through isolated outputs, while communicating via RS-485. The module is suitable for DIN-rail mounting in demanding industrial environments.


4 x Digital Input · 4 x Isolated Output · RS-485 Modbus · -25 to 75°C


Features that make the difference

  • Digital inputs - detect wet contact signals with counter function up to 65535
  • Isolated outputs - drive external loads up to 650 mA per channel
  • RS-485 communication - supports DCON, Modbus RTU and Modbus ASCII protocols
  • Programmable watchdog - ensures stable operation in case of communication failure
  • High isolation - 3750 VDC intra-module isolation protects against noise and overvoltage


Application areas

The module fits monitoring and control tasks in industrial installations where reliable signal handling is essential.

  • Factory automation
  • Building automation
  • Process control and monitoring
  • Remote control of external equipment


A robust and flexible solution for digital signal handling in industrial networks.