Item number CHANN-ANALO-OUTPU-REPEA

4-ch 14-bit AO Module with 5-ch DI, RS-485, DCON/Modbus RTU

4 x Analog Output, Voltage/Current
0-5V, +/-5V, 0-10V, +/-10V, 0-20mA, 4-20mA
14-bit Resolution, +/-0.1% FSR Accuracy
5 x Digital Input, Dry Contact
1 x RS-485, Modbus RTU/DCON
Baud Rate 1200-115200 bps
3000 VDC Intra-module Isolation
DIN-Rail Mounting
10-30VDC, 3.2W
-25 to +75C (special components required)
72 x 123 x 35 mm

345.72 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type Dry ContactVoltageCurrent
Operating Temperature 25 ~ +75 °C
Resolution 14-bit
Range Voltage: 0 ~ 5 V, ±5 V, 0 ~ 10 V, ±10 VCurrent: 0 ~ 20 mA, 4 ~ 20 mA
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication
Ports 1 x RS-485
Input Range +10 ~ +30 VDC
Consumption 3.2 W
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 3000 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
Channels 45
Accuracy ±0.1% of FSR
Power-on Value Programmable
Safe Value Programmable
Sink/Source (NPN/PNP) Source
ON Voltage Level Close to GND
OFF Voltage Level Open
Baud Rate 1200 ~ 115200 bps
RS Immunity (IEC 61000-4-3) 5 V/m, 80 MHz ~ 1GHz
Data Format (N, 8, 1), (N, 8, 2), (E, 8, 1), or (O, 8, 1)
Protocol Modbus RTU, DCON
DA Output Response Time 10 ms
Frequency 50 Hz
EFT (IEC 61000-4-4) ±4 kV for Power Line
Max. Counts 65535 (16-bit)
Min. Pulse Width 10 ms

Repeater Module

This repeater module is designed for industrial data acquisition and control applications where analog and digital signals need reliable conversion and distribution over an RS-485 network. It acts as a robust link between field equipment and control systems in demanding industrial environments.


4 x Analog Output · 5 x Digital Input · RS-485 Modbus RTU/DCON · DIN-Rail Mounting


Features and Capabilities

  • 4 analog output channels - supports voltage and current with 14-bit resolution
  • 5 digital inputs - dry contact type for status monitoring and counting
  • RS-485 communication - Modbus RTU and DCON protocol with baud rates up to 115200 bps
  • High isolation - 3000 VDC intra-module isolation protects against noise and transients
  • Rugged design - EFT and ESD protection along with wide operating temperature for industrial use


Application Areas

The module is well suited for monitoring and control in industrial installations where stable data transmission is essential.

  • Process automation
  • Building automation
  • Remote monitoring of measuring equipment
  • Distributed I/O systems


A reliable and flexible solution for industrial signal processing and communication.