Item number REPEA-MODUL-4X-ANALO

4-ch 16-bit AO Module with 4 DI and 4 DO, RS-485, DCON/Modbus RTU

4 x Analog output V/I, 16-bit
4 x Digital input, Dry/Wet Contact
4 x Open Collector output, 700mA
RS-485 Modbus RTU, DCON
Baud rate 1200-115200 bps
Accuracy +/-0.02% of FSR
Intra-module isolation 2500VDC
ESD +/-8kV, EFT +/-4kV protection
10-30VDC, 4.0W
72 x 123 x 35 mm
-25 to 75C (special components required)

333.66 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type Dry ContactWet ContactVoltageCurrentOpen Collector
Operating Temperature 25 ~ +75 °C
Resolution 16-bit
Range Voltage: 0 ~ +5 VDC, ±5 VDC, 0 ~ +10 VDC, ±10 VDCCurrent: 0 ~ +20 mA, +4 ~ +20 mA
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication
Ports 1 x RS-485
Input Range +10 ~ +30 VDC
Consumption 4.0 W
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
Overload Protection 1.4 A
Short-circuit Protection Yes
Reverse Polarity Protection Yes
Intra-module Isolation 2500 VDC
ESD (IEC 61000-4-2) ±8 kV Contact for Each Terminal
Channels 4
Accuracy ±0.02% of FSR
Overvoltage Protection +60 VDC60 VDC
Programmable Output Slope Voltage: 0.0625 ~ 512 V/SecondCurrent: 0.125 ~ 1024 mA/Second
Current Output Wiring Source
Current Load Resistance 1000 Ω
Short Circuit Protection Yes
Power-on Value Programmable
Safe Value Programmable
Sink/Source (NPN/PNP) Sink
ON Voltage Level Dry: Close to GNDWet: +1 VDC max.
OFF Voltage Level Dry: OpenWet: +4 ~ +30 VDC
Effective Distance 500 m Max.
Load Voltage +3.5 ~ +50 VDC
Load Current 700 mA/Channel
Power on Value Programmable
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1), (N, 8, 2), (E, 8, 1), or (O, 8, 1)
Protocol Modbus RTU, DCON
DA Output Response Time 10 ms per channel
Open Wire Detection For 4 ~ 20 mA only
Frequency 100 Hz
EFT (IEC 61000-4-4) ±4 kV for Power Line
Max. Counts 65535 (16-bit)
Min. Pulse Width 5 ms

Repeater Module

This repeater module is designed to amplify and forward analog and digital signals in industrial measurement systems. The module provides galvanic isolation between channels and ensures stable signal transmission over long distances via RS-485. It is typically used in process monitoring and automation systems where reliable signal transmission is essential.


4 x Analog I/O · 4 x Digital Input · 4 x Open Collector Output · RS-485 Modbus RTU/DCON


Features and Benefits

  • 16-bit resolution - high precision in analog signal processing
  • 2500VDC galvanic isolation - protects against noise and voltage spikes
  • Programmable watchdog timer - ensures stable operation during communication failures
  • Short-circuit and overvoltage protection - increases operational reliability
  • Wide operating temperature -25 to 75°C - suitable for demanding industrial environments


Applications

The module is suitable for applications where analog and digital signals need to be reliably amplified and distributed over an RS-485 network.

  • Process monitoring and control
  • Industrial automation
  • Signal distribution in DIN-rail installations
  • Monitoring of sensors and actuators


With high isolation, robust protection and flexible signal handling, this module is a reliable choice for industrial signal amplification.