Item number REPEA-MODUL-DIGIT-INPUT-4

4-ch Isolated (Wet, 4~30 VDC) DI and 5-ch DC-SSR Output Module with LED Display, RS-485, DCON

4 x Digital Input, Wet Contact
5 x DC-SSR Relay Output (Form A)
Contact Rating 3-30VDC @ 1A
Sink/Source (NPN/PNP) Input
1 x RS-485, DCON Protocol
Baud Rate 1200-115200 bps
Programmable Watchdog Timer
Intra-module Isolation 3750VDC
10-30VDC Power Input
72 x 123 x 35 mm
-25 to +75C (special components required)
DIN-Rail Mounting

164.82 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type I/O LED IndicatorWet ContactDC-SSR
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication9 x Digital Input/Relay Output
Ports 1 x RS-485
Input Range +10 ~ +30 VDC
Consumption 1.0 W
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 3750 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 5 (Form A)4
Input Impedance 3 kΩ
Overvoltage Protection ±35 VDC
Safe Value Programmable
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +1 VDC max.
OFF Voltage Level +4 ~ +30 VDC
Power on Value Programmable
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1), (N, 8, 2), (E, 8, 1), or (O, 8, 1)
Protocol DCON
Contact Rating 3 ~ 30 VDC @ 1A
Operate Time 1 ms
Release Time 1 ms
Electrical Endurance Long Life, No Arcing, No Bounce, No Switching Noise
Leakage Current 0.1 mA
Frequency 100 Hz
EFT (IEC 61000-4-4) ±2 kV for Power Line
Max. Counts 65535 (16-bit)
Min. Pulse Width 5 ms

I/O Repeater Module

This I/O repeater module is used to extend and reinforce digital input and output signals in industrial automation systems. The module communicates via RS-485 using the DCON protocol and is well suited for reliable operation in demanding environments.


4 x Digital Input · 5 x DC-SSR Relay Output · RS-485 DCON · -25 to +75°C


Features and Benefits

  • Wet Contact Input - supports sink/source (NPN/PNP) signals
  • DC-SSR Relay Outputs - long life with no arcing or switching noise
  • Programmable Watchdog - ensures stable operation during communication faults
  • High Isolation - 3750 VDC intra-module isolation protects against noise
  • Robust Protection - EFT and ESD protection per IEC standards


Application Areas

The module is suitable for industrial control systems requiring reliable signal transmission over long distances.

  • Factory automation
  • Remote machine monitoring
  • Building automation
  • Process industry


A reliable choice for robust and noise-resistant I/O expansion in industrial applications.