Item number REPEA-MODUL-2X-AI

4-channel Isolated AI, 2-channel Isolated DI (Wet) and 2-channel Isolated DO (Sink, NPN) Module, RS-485

2x Analog Input, Voltage/Current
Range +-1V to +-10V, +-20mA, 4-20mA
14-bit Normal / 12-bit Fast Mode
Accuracy +-0.1% Normal, +-0.5% Fast
2x Digital Input, Wet Contact
2x Digital Output, Open Collector
1x RS-485, DCON/Modbus RTU/ASCII
2500 VDC Intra-module Isolation
DIN-Rail Mounting
10-30VDC Powered from Terminal Block
52 x 98 x 27 mm
25 to 75C (special components required)

160.80 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type Isolated Open CollectorWet Contact
Operating Temperature 25 ~ +75 °C
Resolution Normal Mode: 14-bitFast Mode: 12-bit
Range Voltage: ±1 V, ±2.5 V, ±5 V, ±10 VCurrent: ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication
Ports 1 x RS-485
Consumption 1 W Max.
Dimensions (mm) 52 x 98 x 27 (W x L x H)
Storage Temperature 30 ~ +75 °C
Humidity 10 ~ 95% RH, Non-condensing
Overload Protection 1.4 A
Short-circuit Protection Yes
Reverse Polarity Protection Yes
Intra-module Isolation 2500 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 2Voltage: 2 Single-endedCurrent: 2 Single-ended
Accuracy Normal Mode: ±0.1%Fast Mode: ±0.5%
Sampling Rate Normal Mode: 10 HzFast Mode: 200 Hz
Input Impedance 10 KΩ, 0.5 WVoltage: 10 MΩCurrent: 136 Ω
Overvoltage Protection 60 VDC120 VDC70 VDC
Safe Value Programmable
Powered from Terminal Block 10 ~ 30 VDC
Sink/Source (NPN/PNP) SinkSource
ON Voltage Level +3.5 ~ +50 VDC
OFF Voltage Level +1 VDC Max.
Load Voltage +3.5 ~ +50 VDC
Load Current 700 mA/Channel
Power on Value Programmable
Baud Rate 1200 ~ 115200 bps
Overcurrent Protection 50 mA at 110 VDC
Individual Channel Configuration Yes
Data Format (N, 8, 1), (N, 8, 2), (O, 8, 1), (E, 8, 1)
Protocol DCON, Modbus RTU, Modbus ASCII
Frequency 50 Hz
EFT (IEC 61000-4-4) ±4 kV for Power
Max. Counts 65535 (16-bit)
Min. Pulse Width 10 ms

Repeater Module

This repeater module is designed to transmit and isolate analog and digital signals in industrial measurement systems. It combines analog inputs, digital inputs/outputs and RS-485 communication in a compact DIN-rail unit.


2x Analog Input · 2x Digital Input/Output · RS-485 Modbus · 2500 VDC Isolation


Features that ensure reliable signal handling

  • Analog inputs -measure voltage and current with high accuracy
  • Dual sampling mode -choose between 14-bit normal or 12-bit fast measurement
  • Galvanic isolation -2500 VDC protects against noise and transients
  • Programmable watchdog -ensures stable operation of communication and module
  • Protection circuits -overvoltage and short-circuit protection on all channels


Applications

The module suits industrial environments requiring reliable signal repetition and distributed I/O over RS-485.

  • Process monitoring in factory plants
  • Distributed data acquisition
  • Automation systems with Modbus
  • Signal transmission in noisy environments


A robust solution for precise and isolated signal handling in demanding industrial applications.