Item number REPEA-MODUL-16-DIGIT

16-ch Isolated (Wet, 80~250 VAC/±100~±250 VDC) DI and 2-ch (Sink, NPN) DO Module with LED Display, RS-485, DCON/Modbus RTU

16 x Digital Input, Wet Contact
Sink/Source, 100 Hz, 16-bit Counter
2 x Isolated Open Collector Output
Sink, 600 mA/Channel, 5-50VDC Load
1 x RS-485, Modbus RTU, DCON
1200-115200 bps Baud Rate
Programmable Watchdog Timer
3750 VDC Intra-module Isolation
DIN-Rail Mounting
10-30VDC Input, 0.4W
76 x 121 x 42 mm
-25 to 75C (special components required)

184.92 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type Isolated Open CollectorWet Contact
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication16 x Digital Input
Ports 1 x RS-485
Input Range +10 ~ +30 VDC
Consumption 0.4 W
Dimensions (mm) 76 x 121 x 42 (W x L x H)
Storage Temperature 40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
Overload Protection 1.4 A
Short-circuit Protection Yes
Reverse Polarity Protection Yes
Intra-module Isolation 3750 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 216
Input Impedance 150 kΩ
Overvoltage Protection 60 VDC300 VAC/VDC max.
Safe Value Programmable
Sink/Source (NPN/PNP) SinkSink/Source
ON Voltage Level 80 ~ 250 VAC±100 ~ ±250 VDC
OFF Voltage Level 30 VAC max.±30 VDC max.
Load Voltage +5 ~ +50 VDC
Load Current 600 mA/channel
Power on Value Programmable
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1), (N, 8, 2), (E, 8, 1), or (O, 8, 1)
Protocol Modbus RTU, DCON
Frequency 100 Hz
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
Max. Counts 65535 (16-bit)
Min. Pulse Width 5 ms

Repeater Module

This repeater module is designed for industrial I/O systems where digital signals must be reliably monitored and forwarded over long distances. The module combines a large number of digital inputs with isolated outputs and RS-485 communication for robust data transfer in demanding environments.


16 x Digital Input · 2 x Isolated Output · RS-485 Modbus RTU/DCON · DIN-Rail Mounting


Features that ensure stable operation

  • 16 digital inputs - supports wet contact signals with sink/source configuration
  • 2 isolated outputs - open collector outputs with 600 mA per channel
  • Programmable watchdog - ensures automatic recovery from communication failures
  • High isolation - 3750 VDC intra-module isolation protects against noise and voltage spikes
  • Robust protection - built-in EFT, ESD and surge protection according to IEC standards


Application areas in industrial systems

The module is well suited for monitoring and control in distributed I/O networks where reliable signal transmission is essential.

  • Factory automation and process monitoring
  • Building automation and alarm systems
  • Distributed measurement systems
  • Remote control of machinery via RS-485


With its many digital inputs, isolated outputs and robust RS-485 communication, this module is the right choice for demanding industrial I/O solutions.