Item number REPEA-MODUL-4X-AO

4-ch 16-bit AO Module with 4 DI, 4 DO and LED Display, RS-485, DCON/Modbus RTU

4 x Analog Output, 16-bit resolution
4 x Digital Input, dry/wet contact
4 x Digital Output, open collector
AO range: 0-5V, +-5V, 0-10V, +-10V
AO current: 0-20mA, 4-20mA
RS-485 port, Modbus RTU/DCON
Baud rate 1200-115200 bps
Isolation 2500 VDC
ESD +-8kV, EFT +-4kV protection
10-30VDC, 4.5W
72 x 123 x 35 mm
-25 to +75C (special components required)

341.70 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type VoltageCurrentOpen CollectorDry ContactWet ContactI/O LED Indicator
Operating Temperature 25 ~ +75 °C
Resolution 16-bit
Range Voltage: 0 ~ +5 VDC, ±5 VDC, 0 ~ +10 VDC, ±10 VDCCurrent: 0 ~ +20 mA, +4 ~ +20 mA
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication4 x Analog Output4 x Digital Input4 x Digital Output
Ports 1 x RS-485
Input Range +10 ~ +30 VDC
Consumption 4.5 W
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
Overload Protection 1.4 A
Short-circuit Protection Yes
Reverse Polarity Protection Yes
Intra-module Isolation 2500 VDC
ESD (IEC 61000-4-2) ±8 kV Contact for Each Terminal
Channels 4
Accuracy ±0.02% of FSR
Overvoltage Protection +60 VDC60 VDC
Programmable Output Slope Voltage: 0.0625 ~ 512 V/SecondCurrent: 0.125 ~ 1024 mA/Second
Current Output Wiring Source
Current Load Resistance 1000 Ω
Short Circuit Protection Yes
Power-on Value Programmable
Safe Value Programmable
Sink/Source (NPN/PNP) Sink
ON Voltage Level Dry: Close to GNDWet: +1 VDC max.
OFF Voltage Level Dry: OpenWet: +4 ~ +30 VDC
Effective Distance 500 m Max.
Load Voltage +3.5 ~ +50 VDC
Load Current 700 mA/Channel
Power on Value Programmable
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1), (N, 8, 2), (E, 8, 1), or (O, 8, 1)
Protocol Modbus RTU, DCON
DA Output Response Time 10 ms per channel
Open Wire Detection For 4 ~ 20 mA only
Frequency 100 Hz
EFT (IEC 61000-4-4) ±4 kV for Power Line
Max. Counts 65535 (16-bit)
Min. Pulse Width 5 ms

Repeater Module for Industrial I/O

This repeater module is designed to extend and reinforce analog and digital signals in industrial automation systems. It is used to connect field instruments to an RS-485 network via the Modbus RTU protocol, ensuring stable data transmission over long distances.


4 x Analog Output · 4 x Digital Input · 4 x Digital Output · RS-485 Modbus RTU


Robust features for demanding environments

  • 16-bit resolution - high precision on analog output signals
  • 2500 VDC isolation - protects the system from noise and voltage spikes
  • ESD and EFT protection - high resistance to electrical disturbances
  • Programmable watchdog timer - ensures stable operation during communication failures
  • Short-circuit and overvoltage protection - extends module lifespan


Application areas in industry

The module is well suited for distributed I/O systems where long cable lengths or electrical noise require extra signal protection.

  • Process automation and factory control
  • Sensor and actuator monitoring
  • Building automation
  • Remote measurement tasks


With robust isolation, high precision and flexible signal support, this module is the right choice for reliable industrial I/O communication.