Item number RS-485-REPEA-MODUL

3-channel Isolated DI (Wet) and 3-channel PhotoMOS Relay Module, RS-485

3 x Digital Input, Wet Contact
3 x PhotoMOS Relay Output
1 x RS-485 Port
Modbus RTU, Modbus ASCII, DCON
Baud Rate 1200-115200 bps
Programmable Watchdog Timer
Reverse Polarity Protection
DIN-Rail Mounting
10-30VDC
52 x 98 x 27 mm
-25 to 75C (special components required)

88.44 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type Wet ContactPhotoMOS Relay
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication
Ports 1 x RS-485
Consumption 0.4 W max.
Dimensions (mm) 52 x 98 x 27 (W x L x H)
Storage Temperature 30 ~ +75 °C
Humidity 10 ~ 95% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 3750 VDC for Digital Input2000 VDC for PhotoMOS Relay Output
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 3
Input Impedance 10 kΩ, 0.66 W
Overvoltage Protection 70 VDC
Safe Value Programmable
Powered from Terminal Block 10 ~ 30 VDC
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +3.5 ~ +50 VDC
OFF Voltage Level +1 VDC Max.
Power on Value Programmable
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1), (N, 8, 2), (O, 8, 1), (E, 8, 1)
Protocol DCON, Modbus RTU, Modbus ASCII
Operate Time 5 ms max.
Release Time 0.5 ms max.
Electrical Endurance No Arcing, No Bounce, and No Switching Noise
Frequency 100 Hz
EFT (IEC 61000-4-4) ±4 kV for Power
Max. Counts 65535 (16-bit)
Min. Pulse Width 5 ms

Repeater Module

This repeater module is designed to extend and strengthen RS-485 communication in industrial networks, while also providing digital input and relay output for monitoring and control. It is well suited for automation systems where reliable data transfer and signal isolation are essential.


3 x Digital Input · 3 x PhotoMOS Relay Output · RS-485 with Modbus · 10-30VDC


Features for stable operation

  • Programmable Watchdog Timer - monitors communication and module for improved reliability
  • Galvanic isolation - up to 3750 VDC protects against noise and voltage spikes
  • PhotoMOS relay outputs - switch without arcing, bounce, or noise
  • Multiple protocol support - DCON, Modbus RTU and Modbus ASCII in one module
  • Overvoltage and reverse polarity protection - extends module lifetime in demanding environments


Application areas in industry

The module suits applications where digital signals need to be monitored and relays controlled over a robust RS-485 connection.

  • Industrial automation and process monitoring
  • Remote control of machines and equipment
  • Monitoring of sensors and contacts
  • DIN-rail based control panels


A robust solution for reliable signal transmission and I/O control in demanding industrial environments.