Item number REPEA-MODUL-DIGIT-INPUT

4-ch Isolated (Wet, 4~30 VDC) DI and 5-ch Power Relay Module with LED Display, RS-485, DCON/Modbus RTU

4 x Digital Input, Wet Contact
5 x Power Relay Output, Form A
Contact Rating 5A @ 250VAC / 30VDC
1 x RS-485, Modbus RTU, DCON
Baud Rate 1200-115200 bps
Intra-module Isolation 3750VDC
ESD +-4kV Contact, +-8kV Air
Programmable Watchdog Timer
10-30VDC, 1.8W
72 x 123 x 35 mm
-25 to 75C (special components required)

151.42 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type Wet ContactI/O LED IndicatorPower Relay
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status 1 x Power and Communication9 x Digital Input/Relay Output
Ports 1 x RS-485
Input Range +10 ~ +30 VDC
Consumption 1.8 W
Dimensions (mm) 72 x 123 x 35 (W x L x H)
Storage Temperature 40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
Reverse Polarity Protection Yes
Intra-module Isolation 3750 VDC
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Channels 45 (Form A)
Input Impedance 3 kΩ
Overvoltage Protection ±35 VDC
Safe Value Programmable
Sink/Source (NPN/PNP) Sink/Source
ON Voltage Level +1 VDC max.
OFF Voltage Level +4 ~ +30 VDC
Power on Value Programmable
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1), (N, 8, 2), (E, 8, 1), or (O, 8, 1)
Protocol Modbus RTU, DCON
Contact Material Gold-plated Silver Cadmium Alloy
Contact Rating 5 A @ 250 VAC5 A @ 30 VDC
Operate Time 6 ms
Release Time 3 ms
Electrical Endurance 1 x 10^5 ops.
Mechanical Endurance 2 x 10^7 ops.
Frequency 100 Hz
EFT (IEC 61000-4-4) ±2 kV for Power Line
Max. Counts 65535 (16-bit)
Min. Pulse Width 5 ms

Repeater Module for Digital I/O

This repeater module is designed to extend and strengthen digital I/O signals in industrial networks. It is used for monitoring and controlling digital inputs and outputs via RS-485 communication with high noise immunity.


4 x Digital Input · 5 x Relay Output · RS-485 Modbus RTU · -25 to +75°C


Robust features for industrial operation

  • Digital Input -4 channels with wet contact type for flexible signal reading
  • Relay Output -5 channels with gold-plated contact material for long service life
  • High isolation -3750 VDC intra-module isolation protects against noise and voltage spikes
  • ESD and EFT protection -strong protection against electrostatic discharge and transients
  • Programmable watchdog -ensures stable communication and automatic fault handling


Application areas

The module is suitable for industrial environments where reliable I/O extension over long distances is required.

  • Factory automation and process monitoring
  • Building management and SCADA systems
  • Remote monitoring of sensors and actuators
  • Distributed control systems in harsh environments


A reliable solution for extending digital I/O signals in demanding industrial applications.