Item number ETHER-MODUL-DIGIT-INPUT-7

Ethernet Module with 6 x Digital Input, 6 x Relay Output, Modbus TCP

6 x Digital Input Dry/Wet Contact
6 x Power Relay Output 5A 250VAC
2 x RJ45 10/100 Switch Ports LAN Bypass
Modbus TCP/UDP, MQTT, SNMP V2c
32-bit ARM CPU
Built-in Web Server
Isolation Ethernet 1500VDC, I/O 3000VDC
Password and IP Filter Access Control
-25 to 75C (special components required)
10-30VDC, 3.5W max
33 x 126 x 108 mm
DIN-Rail mounting

226.46 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 32-bit ARM
Installation DIN-Rail Mounting
Type Power Relay, Form A (SPST N.O.)Dry ContactWet Contact
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, I/O
Ports 2 x RJ-45, 10/100 Base-TX, Switch Ports
Consumption 3.5 W (max.)
Dimensions (mm) 33 x 126 x 108 (W x L x H)
Storage Temperature 40 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±8 kV Contact for Each Terminal±16 kV Air for Random Point
Channels 6
Input Impedance 7.5 kΩ
Overvoltage Protection +70 VDC
Safe Value Programmable
Powered from Terminal Block +10 ~ +30 VDC
Sink/Source (NPN/PNP) Dry: SourceWet: Sink/Source
ON Voltage Level Dry: Close to GNDWet: +10 ~ +50 VDC
OFF Voltage Level Dry: OpenWet: +4 VDC (max.)
Low Pass Filter 1 ~ 6500 ms (0.08 Hz ~ 500 Hz)
Power on Value Programmable
Protocol Modbus TCP, Modbus UDP, MQTT, SNMP V2c
Casing Plastic
Contact Rating 5 A @ 250 VAC/24 VDC (Resistive Load)
Operate Time 10 ms (max.)
Release Time 5 ms (max.)
Electrical Endurance 10^5 ops.
Mechanical Endurance 2 x 10^7 ops.
Frequency 3 kHz
2-way Isolation Ethernet: 1500 VDCI/O: 3000 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±3 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
LAN bypass Yes
Access Control Password and IP Filter
Built-in Web Server Yes

Ethernet I/O Module

This Ethernet I/O module combines digital inputs and relay outputs in a rugged DIN-rail unit designed for industrial monitoring and control. It is well suited for remote equipment control as well as status and alarm detection over Ethernet networks.


6 x Digital Input · 6 x Power Relay Output · Modbus TCP/UDP · -25 to +75°C


Features for reliable operation

  • Isolated I/O -3000 VDC isolation protects against transients and noise
  • Built-in web server -easy configuration directly through a browser
  • LAN bypass -maintains network connection during power loss
  • Programmable watchdog -monitors module and communication
  • Wide temperature range -reliable operation from -25°C to +75°C


Typical industrial applications

The module is suited for applications that require robust monitoring and control of digital signals over a network.

  • Building automation
  • Process monitoring
  • Remote control of pumps and valves
  • Alarm and status detection


A robust and flexible choice for industrial I/O control over Ethernet.