Item number ETHER-MODUL-DIGIT-INPUT-6

Ethernet I/O Module with Digital Input and Relay Output, Modbus TCP/UDP, MQTT, SNMP

32-bit ARM CPU
Modbus TCP/UDP, MQTT, SNMP V2c
2 x RJ45 10/100 Switch, LAN Bypass
Digital Input, Wet Contact, Sink
Relay Output, Open-Source, Source
Load Current 450 mA/channel
Isolation Ethernet 1500VDC, I/O 3000VDC
Password and IP Filter Access
-25 to +75C (special components required)
10-48VDC, 3.6W max
33 x 135 x 109 mm
DIN-Rail mounting

222.44 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 32-bit ARM
Installation DIN-Rail Mounting
Type Open-SourceWet Contact
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, I/O
Ports 2 x RJ-45, 10/100 Base-TX, Switch Ports
Consumption 3.6 W (max.)
Dimensions (mm) 33 x 135 x 109 (W x L x H)
Storage Temperature 40 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal±8 kV Air for Random Point
Input Impedance 7.5 kΩ
Safe Value Programmable
Powered from Terminal Block +10 ~ +48 VDC
Sink/Source (NPN/PNP) SinkSource
ON Voltage Level +5 ~ +50 VDC
OFF Voltage Level +1 VDC (max.)
Low Pass Filter 1 ~ 6500 ms (0.08 Hz ~ 500 Hz)
Load Voltage +5 ~ +50 VDC
Load Current 450 mA/channel
Power on Value Programmable
Protocol Modbus TCP, Modbus UDP, MQTT, SNMP V2c
Casing Plastic
Frequency 3 kHz
2-way Isolation Ethernet: 1500 VDCI/O: 3000 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
LAN bypass Yes
Access Control Password and IP Filter
Built-in Web Server Yes

Ethernet I/O Module

This Ethernet I/O module is designed for industrial monitoring and control applications, integrating digital inputs and relay outputs directly into an Ethernet network. It uses a 32-bit ARM CPU and supports multiple industrial communication protocols for reliable data exchange.


Modbus TCP/UDP · MQTT and SNMP V2c · 2 x RJ45 Switch Ports · DIN-Rail Mounting


Features that make the difference

  • Isolation -1500 VDC on Ethernet and 3000 VDC on I/O for safe operation
  • Built-in web server -easy configuration and monitoring via browser
  • LAN bypass -maintains network connection during power loss
  • Programmable watchdog -monitors both module and communication
  • Robust EMC protection -withstands EFT, ESD and surge events


Application areas

The module suits demanding industrial environments requiring reliable monitoring and remote control of digital signals.

  • Remote monitoring of machines and plants
  • Factory automation
  • Building management and SCADA systems
  • Distributed I/O solutions in industrial networks


With wide temperature support and solid isolation, this module is a reliable choice for demanding industrial applications.