Item number ETHER-MODUL-DIGIT-INPUT-4

Ethernet I/O Module with Digital Input and Relay Output, Modbus TCP/UDP, MQTT, SNMP

32-bit ARM CPU
Modbus TCP/UDP, MQTT, SNMP V2c
2 x RJ45 10/100 Switch Ports, LAN Bypass
Isolation: Ethernet 1500VDC, I/O 3000VDC
Digital Input, Source Type
Relay Output, Sink Type, 350mA/ch
Programmable Watchdog Timer
Built-in Web Server
10-30VDC Power Input
33 x 126 x 108 mm
-25 to 75C (special components required)

250.58 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 32-bit ARM
Installation DIN-Rail Mounting
Type Dry ContactOpen-collector
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, I/O
Ports 2 x RJ-45, 10/100 Base-TX, Switch Ports
Consumption 2.9 W (max.)
Dimensions (mm) 33 x 126 x 108 (W x L x H)
Storage Temperature 40 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Short-circuit Protection Yes
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±8 kV Contact for Each Terminal±16 kV Air for Random Point
Input Impedance 7.5 kΩ
Safe Value Programmable
Powered from Terminal Block +10 ~ +30 VDC
Sink/Source (NPN/PNP) SinkSource
ON Voltage Level Close to GND
OFF Voltage Level Open
Low Pass Filter 1 ~ 6500 ms (0.08 Hz ~ 500 Hz)
Load Voltage +5 ~ +50 VDC
Load Current 350 mA/channel
Power on Value Programmable
Protocol Modbus TCP, Modbus UDP, MQTT, SNMP V2c
Casing Plastic
Frequency 2.5 kHz
2-way Isolation Ethernet: 1500 VDCI/O: 3000 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±3 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
LAN bypass Yes
Access Control Password and IP Filter
Built-in Web Server Yes

Ethernet I/O Module

This Ethernet I/O module combines digital inputs and relay outputs in a rugged DIN-rail unit for industrial monitoring and control. It is built for reliable operation in demanding environments and supports remote control via multiple standard protocols.


Modbus TCP/UDP, MQTT, SNMP · 32-bit ARM CPU · DIN-Rail mounting · -25 to +75°C


Features that make the difference

  • Built-in web server - easy configuration without extra software
  • LAN bypass - maintains network connection during power loss
  • Galvanic isolation - protects against noise and voltage spikes
  • Programmable watchdog - automatic recovery from faults
  • Access control - password and IP filtering for security


Application areas

The module suits tasks where digital signals must be monitored and relays controlled over a network.

  • Industrial automation
  • Remote equipment monitoring
  • Building management
  • SCADA integration


A rugged and flexible solution for reliable I/O control over Ethernet.