Item number ETHER-MODUL-8X-DIGIT-2

Ethernet I/O Module 8x Digital Input, 8x Relay Output, PoE

8 x Digital Input, Dry/Wet Contact
8 x Push-Pull Output, Sink/Source
Load 3.5-80V, 500mA/channel
2 x RJ45 10/100 Switch Ports, LAN Bypass
PoE Powered, IEEE 802.3af Class1
Modbus TCP/UDP, MQTT, SNMP V2c
Built-in Web Server
Programmable Watchdog Timer
I/O Isolation 3000 VDC
10-48VDC, 3.7W max
33 x 126 x 108 mm
-25 to 75C (special components required)

253.26 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 32-bit ARM
Installation DIN-Rail Mounting
PoE yes
Type Dry ContactWet ContactPush-Pull
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, I/O, PoE
Ports 2 x RJ-45, 10/100 Base-TX, Switch Ports
Consumption 3.7 W (max.)
Dimensions (mm) 33 x 126 x 108 (W x L x H)
Storage Temperature 40 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±8 kV Contact for Each Terminal±16 kV Air for Random Point
Channels 8
Input Impedance 7.5 kΩ
Overvoltage Protection +70 VDC
Safe Value Programmable
Powered from Terminal Block +10 ~ +48 VDC
Sink/Source (NPN/PNP) Sink/SourceDry: SourceWet: Sink/Source
ON Voltage Level Dry: Close to GNDWet: +5 ~ +50 VDC
OFF Voltage Level Dry: OpenWet: +1 VDC (max.)
Low Pass Filter 1 ~ 6500 ms (0.08 Hz ~ 500 Hz)
Load Voltage +3.5 ~ +80 V
Load Current 500 mA/Channel
Power on Value Programmable
Protocol Modbus TCP, Modbus UDP, MQTT, SNMP V2c
Casing Plastic
Powered from PoE IEEE 802.3af, Class1
Frequency 3 kHz
2-way Isolation I/O: 3000 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
LAN bypass Yes
Access Control Password and IP Filter
Built-in Web Server Yes

Ethernet I/O Module

This Ethernet I/O module is built for industrial monitoring and control applications where digital signals must be collected and relays controlled over the network. It combines rugged hardware with flexible communication protocols for demanding automation and SCADA environments.


8 x Digital Input · 8 x Push-Pull Output · PoE Powered · Modbus TCP/UDP


Features that make a difference

  • Dual I/O types -supports both dry and wet contact inputs
  • PoE support -simplifies installation with a single cable
  • High isolation -3000 VDC protects against noise and overvoltage
  • LAN bypass -maintains network connection during power loss
  • Programmable watchdog -increases reliability in unattended installations


Typical applications

The module suits applications where reliable remote monitoring and control of equipment is essential.

  • Building automation
  • Industrial process monitoring
  • Remote control of pumps and motors
  • SCADA integration


A rugged and flexible choice for industrial I/O control over Ethernet.