Item number ETHER-MODUL-8X-DIGIT

Ethernet I/O Module 8x Digital Input, 8x Relay Output, PoE, 10-48VDC

8 x Digital Input (Dry/Wet Contact)
8 x Open Collector Output, 650mA/ch
2 x RJ45 10/100 Switch Ports, PoE
Modbus TCP/UDP, MQTT, SNMP V2c
Built-in Web Server, ARM CPU
2-way Isolation I/O: 3000VDC
Programmable Watchdog Timer
Password and IP Filter Access
PoE IEEE 802.3af Class2
10-48VDC, 4.3W max
33 x 126 x 108 mm
-25 to +75C (special components required)

253.26 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 32-bit ARM
Installation DIN-Rail Mounting
PoE yes
Type Dry ContactWet ContactOpen Collector
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, I/O, PoE
Ports 2 x RJ-45, 10/100 Base-TX, Switch Ports
Consumption 4.3 W (max.)
Dimensions (mm) 33 x 126 x 108 (W x L x H)
Storage Temperature 40 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Overload Protection 1.4 A (with short-circuit protection)
Short-circuit Protection Yes
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±8 kV Contact for Each Terminal±16 kV Air for Random Point
Channels 8
Input Impedance 7.5 kΩ
Overvoltage Protection +60 VDC+70 VDC
Safe Value Programmable
Powered from Terminal Block +10 ~ +48 VDC
Sink/Source (NPN/PNP) Dry: SourceWet: Sink/SourceSink
ON Voltage Level Dry: Close to GNDWet: +5 ~ +50 VDC
OFF Voltage Level Dry: OpenWet: +1 VDC (max.)
Low Pass Filter 1 ~ 6500 ms (0.08 Hz ~ 500 Hz)
Load Voltage +3.5 ~ +50 VDC
Load Current 650 mA/channel
Power on Value Programmable
Protocol Modbus TCP, Modbus UDP, MQTT, SNMP V2c
Casing Plastic
Powered from PoE IEEE 802.3af, Class2
Frequency 3 kHz
2-way Isolation I/O: 3000 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
Max. Counts 4,294,967,295 (32-bit)
LAN bypass Yes
Access Control Password and IP Filter
Built-in Web Server Yes

Ethernet I/O Module

This Ethernet I/O module is designed for remote monitoring and control of digital signals in industrial networks. It combines digital inputs and relay-type outputs with a built-in web server and support for multiple communication protocols.


8 x Digital Input · 8 x Open Collector Output · PoE Support · Modbus TCP/MQTT


Features that make the difference

  • Isolated I/O -3000VDC isolation protects against noise and transients
  • PoE powered -receives power directly through the network cable
  • Robust protection -built-in EFT, ESD and surge protection
  • Flexible protocol support -Modbus TCP/UDP, MQTT and SNMP V2c
  • Wide temperature range -operates reliably from -25 to +75°C


Application areas

The module suits demanding industrial environments where stable monitoring and control of I/O signals is required.

  • Industrial automation
  • Building management
  • Remote facility monitoring
  • Machine control with DIN-rail installation


With robust isolation, flexible protocol support and PoE, this module is a solid choice for industrial I/O control.