Item number ETHER-ENCOD-MODUL-AXIS

EtherCAT Encoder Module, 2-Axis Counter, 32-bit, 4MHz

2-axis encoder counter A/B/C
Differential or single-ended input
Modes: A/B Phase, CW/CCW, Pulse/Dir
32-bit resolution
Frequency up to 4 MHz
Digital filter 1-250us
2500 VDC photo-isolation
2 trigger output channels, 5-48V
Distributed Clocks support
24VDC power, max 4.5W
17.5 x 108 x 90 mm
-25C to +75C (special components required)

268.00 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail or Wall Mounting
Operating Temperature 25℃ ~ +75℃
Resolution 32 Bit
Status Power, EtherCAT status, signal status of each encoder input
Input Range +24 VDC
Consumption Maximum 4.5W
Dimensions (mm) 17.5 × 108 × 90 (W × L × D)
Storage Temperature 30℃ ~ +80℃
Humidity 10 ~ 90% RH, Non-condensing
ESD (IEC 61000-4-2) ±4 kV Contact for Each Channel
Channels 2
Load Voltage 5 ~ 48 V
No. of Axes 2x encoder counter (A, B, C), differential or single-ended
Mode A/B Phase, CW/CCW, Pulse/Dir
Programmable Digital Filter 1 ~ 250 μs
Photo-isolation 2500 VDC
Input Level 5V (default):Logic high: 4 V ~ 5 V/Logic low: 0 V ~ 2 V12 V (set by jumper):Logic high: 5 V ~ 12 V/Logic low: 0 V ~ 2 V24 V (set by jumper):Logic high: 5 V ~ 24 V/Logic low: 0 V ~ 2 V
Max. Load Current 100 mA
Trigger Pulse Width 1 ~ 32,767 μs
Casing Plastic
Frequency A/B Phase:4 MHz Max. CW/CCW:4 MHz Max. Pulse/Dir:4 MHz Max.
EFT (IEC 61000-4-4) Signal: 1 KV Class B; Power: 1 KV Class B
Cycle Time 200 μs
Distributed Clocks Yes

Compact EtherCAT Encoder Module

This EtherCAT encoder module is designed for precise position and speed measurement in industrial automation systems. The module functions as a compact EtherCAT slave device, handling up to two encoder channels with high resolution and fast response. It is typically used in motion control applications where accurate encoder feedback is critical.


2 encoder channels · 32-bit resolution · 4 MHz max frequency · 2500 VDC isolation


Features for reliable measurement

  • Dual encoder input - supports differential or single-ended signals on 2 axes
  • Flexible counting modes - A/B phase, CW/CCW or Pulse/Dir mode
  • High resolution - 32-bit counter ensures accurate position data
  • Galvanic isolation - 2500 VDC photo-isolation protects against noise and voltage spikes
  • Programmable digital filter - adjustable from 1 to 250 μs for stable signal processing


Application areas

The module is well suited for machine building and automation solutions using EtherCAT as the fieldbus.

  • Servo and motor control
  • Axis positioning in production equipment
  • Speed monitoring
  • Integration in DIN-rail based control panels


With high resolution, galvanic isolation and robust EtherCAT integration, this module is the right choice for precise encoder-based machine control.