Item number ETHER-ENCOD-COUNT-MODUL-3

Ethernet Encoder/Counter Module, 8-CH Counter, 4-CH Digital Output, 12-48VDC

8-channel counter / 4-channel encoder input
32-bit counter resolution
Frequency range 1 Hz - 200 kHz
4 x isolated open collector output
Load voltage +5 ~ +50VDC, 650mA/channel
2 x RJ-45 10/100 switch ports
Modbus TCP / Modbus UDP
2-way isolation Ethernet 1500VDC, I/O 2500VDC
Built-in web server
12-48VDC
76 x 120 x 42 mm
-25 to 75C (special components required)

329.64 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Type Isolated Open CollectorCounter, Frequency or Encoder
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, I/O
Ports 2 x RJ-45, 10/100 Base-TX, Swtich Ports
Consumption 4.2 W (max.)
Dimensions (mm) 76 x 120 x 42 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Overload Protection 1.4 A
Short-circuit Protection Yes
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 4-channel Up/Down Counter (CW/CCW)4-channel Dir/Pulse Counter (Bi-directional)4-channel A/B Phase (Quadrant Counting)8-channel Up Counter8-channel Frequency4
Overvoltage Protection +60 VDC
Safe Value Programmable
Powered from Terminal Block +12 ~ +48 VDC
Sink/Source (NPN/PNP) Sink
ON Voltage Level +3.5 ~ +30 VDC
OFF Voltage Level +1 VDC (max.)
Low Pass Filter 1 ~ 32767 μs
Load Voltage +5 ~ +50 VDC
Load Current 650 mA/channel
Power on Value Programmable
Individual Channel Configuration Yes
Protocol Modbus TCP, Modbus UDP
2-way Isolation Ethernet: 1500 VDCI/O: 2500 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
LAN bypass Yes
Access Control ID, Password and IP Filter
Built-in Web Server Yes
Bits 32-bit
Frequency Accuracy 1 Hz ~ 200 kHz: ±0.025% of Input Frequency
Max. Speed +3.5 ~ +10 VDC: 200 kHz+10 ~ +30 VDC: 150 kHz
Counter Value Retention Yes

Ethernet Encoder/Counter Module

This Ethernet Encoder/Counter Module is designed for accurate counting of pulses, frequency and encoder signals in industrial automation systems. It converts high-speed counting inputs into data that can be accessed directly over the Ethernet network. The module is well suited for applications where rotational speed, position or flow must be monitored in real time.


8 counter channels · 32-bit resolution · 200 kHz frequency · Modbus TCP/UDP


Features for reliable operation

  • Flexible channel configuration - each channel can be set individually for counting, frequency or encoder function
  • 2-way isolation - protects both Ethernet and I/O against noise and voltage spikes
  • Built-in web server - easy configuration and monitoring without extra software
  • Programmable watchdog - automatically restarts communication in case of failure
  • Short-circuit and overload protection - extends module lifetime in demanding environments


Application areas

The module suits applications where precise counting and positioning are essential to the process.

  • Monitoring rotational speed of motors
  • Position detection with encoders
  • Flow and production counting on production lines
  • Frequency measurement in process automation


A robust and flexible solution for accurate counting and encoder reading in industrial networks.