Item number ETHER-ENCOD-COUNT-MODUL-2

Ethernet Encoder/Counter Module 8-Ch, PoE, Modbus TCP/UDP

8-ch Up Counter / 4-ch Encoder input
32-bit counter resolution
Frequency range up to 200 kHz
2 x RJ45 10/100 switch ports, PoE
Modbus TCP/UDP protocol
Isolated open collector outputs
2500VDC I/O isolation
Built-in web server
Programmable watchdog timer
12-48VDC or PoE IEEE 802.3af powered
76 x 120 x 42 mm
-25 to 75C (special components required)

356.44 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
PoE yes
Type Counter, Frequency or EncoderIsolated Open Collector
Operating Temperature 25 ~ +75 °C
Watchdog Timer Module, Communication (Programmable)
Status Run, Ethernet, I/O, PoE
Ports 2 x RJ-45, 10/100 Base-TX, Swtich Ports
Consumption 4.4 W (max.)
Dimensions (mm) 76 x 120 x 42 (W x L x H)
Storage Temperature 30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Overload Protection 1.4 A
Short-circuit Protection Yes
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ±4 kV Contact for each terminal ±8 kV Air for random point
Channels 44-channel Up/Down Counter (CW/CCW)4-channel Dir/Pulse Counter (Bi-directional)4-channel A/B Phase (Quadrant Counting)8-channel Up Counter8-channel Frequency
Overvoltage Protection +60 VDC
Safe Value Programmable
Powered from Terminal Block +12 ~ +48 VDC
Sink/Source (NPN/PNP) Sink
ON Voltage Level +3.5 ~ +30 VDC
OFF Voltage Level +1 VDC (max.)
Low Pass Filter 1 ~ 32767 μs
Load Voltage +5 ~ +50 VDC
Load Current 650 mA/channel
Power on Value Programmable
Individual Channel Configuration Yes
Protocol Modbus TCP, Modbus UDP
Powered from PoE IEEE 802.3af, Class1
2-way Isolation I/O: 2500 VDC
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±2 kV for Power Line
LAN bypass Yes
Access Control ID, Password and IP Filter
Built-in Web Server Yes
Bits 32-bit
Frequency Accuracy 1 Hz ~ 200 kHz: ±0.025% of Input Frequency
Max. Speed +3.5 ~ +10 VDC: 200 kHz+10 ~ +30 VDC: 150 kHz
Counter Value Retention Yes

Encoder/Counter Input Module

This Encoder/Counter Input module is designed for accurate detection of pulses, frequencies and encoder signals in industrial automation systems. The module converts counting and encoder data into Ethernet-based communication, allowing easy integration into higher-level control systems. It is suitable for applications requiring high measurement accuracy and reliable operation under demanding conditions.


8-channel counter · 32-bit resolution · PoE powered · Modbus TCP/UDP


Features that make the difference

  • Flexible counting modes -supports Up/Down, Dir/Pulse, A/B phase and frequency measurement
  • High frequency accuracy -up to 200 kHz with ±0.025% precision
  • Galvanic isolation -2500VDC protects against noise and voltage spikes
  • Built-in web server -easy configuration and monitoring without extra software
  • Robust protection -overvoltage, overload and short-circuit protection on all channels


Application areas

The module is suitable for industrial environments where motion, speed or position must be measured and monitored digitally.

  • Motor encoder monitoring
  • Flow measurement and pulse counting
  • Position detection on production lines
  • Frequency measurement in process equipment


With isolated design, high precision and flexible counting, this module is the right choice for demanding industrial measurement tasks.