There are 46 products.
ICP DAS I-7024R-G is a 4 x analog output module, 0 - +/- 10V and 0 - 20mA, 14bit. 5 x digital input with DRY - Contact

RS485 module with volt / mA output. Digital input
4 x analog output - 0 - +/- 10V and 0-20mA
Resolution: 14bit
5 x Digital input - Active high on contact for frame
RS485 Bus - Module is Slave
Format: (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate: 1200 ~ 115200 bps
Supply: 10 ~ 30 VDC

415.27 €
Item numberM485-DA4DI5-1
Physically in stock
8 analoge udgange, 12 bit, MODBUSforAnalog

8 channel analog output module, Modbus protocol
Source type power output
8 x 12-bit analog outputs
Individual Channel Configuration
Cable Break Detection at 4-20mA
8kV ESD Protection
Power-on Value Programming
Security Value Programming
Temperature -25 to +75°C

413.93 €
Item numberMOD485-DA8-I
On the way in
I-7024 module with 4 analog outputs 0-20mA and +/- 10V. RS485 bus

RS485 module with 4 analog outputs
0-20mA or 0 - +/- 10V
D / A response time: 10ms
Resolution: 14bit
Supply voltage: 10 - 30vdc

395.43 €
Item numberM485-DA4-I
On the way in
1 x analog ind, 1 x digital ind, 2 x digital ud, display, RS485 bus...

RS485 Module for measuring voltage and power
is with 15VDC transmitter output for power loop
1 x analog input 0-20MA, 0 - +/- 10V
1 x digital input. High is closed Contact
2 x Digital output (Open Collector) + 50VDC / 30mA
Supply voltage: 10 - 30VDC
Dim: 123 x 72 x 35 mm

382.84 €
Item numberM485-AD16UD-I
On the way in
ICP DAS I-7017Z-G Module for measuring 10 to 20 analogs 4 - 20mA streams or voltages

20 channel analog input module for RS485 Bus
16bit resolution
20 Single Ended inputs (common frame) - Only for Volt
10 differential entrances for volts about power
10 measurements per second (Total )
Jumper Setting in the module
Supply voltage: 10 - 30vdc / 1.3 watts
Dim: 123 x 72 x 35 mm
DIN bracket

336.61 €
Item numberM485-AD16U20-I
On the way in
8 x analoge indgange, maks. +/-10 volt, 16bit, RS 485forVia RS485 bus

8 channel analog input module for RS485 Bus
16bit resolution
10 measurements per second (total)
for current measurement - shunt with 125 ohm resistance
Supply voltage: 10 - 30vdc / 1.3 watt
Dim: 123 x 72 x 35 mm
with your bracket

268.27 €
Item numberM485-AD16U8-I
On the way in
ICP DAS I-7033 - 3 x Temperature measurement with PT100, PT1000 sensor and nine RTD elements, 16bit resolution, RS485

Module for PT100 or PT1000 sensor with 4-, 3- or 2-wire
for nickel temperature sensor (Ni RTD)
16 bit resolution
15 Measurements per second (Total)
Supply voltage: 10 - 30vdc / 1 Watt
Master RS485 must establish bias voltage
Dim: 123 x 72 x 35 mm

378.95 €
Item numberM485-ADRTD3-I
On the way in
16 x voltage measurement +/- 200mV to +/- 10 volts, 16 bit. 250kHz

16 analog inputs with common ground
or 8 differencial inputs.
Up to +/- 10 Volt, 250kHz
16 Bit resolution
Software Support: LabVIEW, Matlab
Software Support : C / C++, Visual Basic, Visual Studio.net
Power from the USB port

1,297.66 €
Item numberUSB-AD16S16A
On the way in
ICP DAS I-7016 Module with 2 x analog input for strain gauge 4-wire, 1 x excitation OUT 0 - + 10VDC, 1 x DI and 4 x Do, RS485

RS485 module with 2-channel strain gauge gauge
high resolution: 16-bit
excitation voltage range: 0 ~ +10 V.
50 Hz Event counter (digital input)
high / low alarm (Digital Output)
Linear Map Function
3000 VDC Intra Module Isolation
Double Watchdog
Temperature Area: -25 to + 75 ° C
Supply Voltage: 10 - 30vdc
Dim: 123 x 76 x 35 mm

356.17 €
Item numberM485-AD16DA12-I
Physically in stock
I / O module with 3 x AI, 6 x DI, 3 x relay to the LAN. Modbus TCP / UDP. Pair-compound

Built-in Web server
Web HMI
2 x RJ45 - Daisy Chain
Modbus TCP and Modbus UDP protocols
Good communication security
Dual Watchdog
Operating temperature range: -25 ~ +75 ° C
I / O connection input pair is mirrored to the other's output
3 x Analog input +/- 10VDC, 0 - 20mA (differential)
6 x Digital input with counter
3 x Relay outputs COM, NO

544.98 €
Item numberETHIO3AI6DI3R-I
Physically in stock
I / O module 4 x Analogue in, 4 x Analog out, 4 x digital zoom. 16bit, 2 x RJ45 Daisy Chain, I / O Pair-feature

Web-baseret I/O modul, Modbus/TCP / UDP
4 x Analog inputs (differential) voltage or current
Resolution: 16bit
Analog Input: +/- 10 V, 0 - 20mA (jumper)
4 x Analog outputs voltage or current
Analog output: +/- 10VDC, 0 - 20mA (jumper)
4 x Digital inputs (dry or wet), max. + 30VDC
I / O Pair-function - the input is mirrored to the second output
10 samples per second (fast: 50 samples)
Protocol: Modbus TCP / UDP
Supply voltage: 12-48 Volt DC / 5Watt

630.74 €
Item numberETHIO4I4O-2I
On the way in
2 x Analog to Load Cell, +/- 2.5V, 0-20mA, 1 x Excitation like cell, 2x digital zoom, 2 x Digital Output

Built-in Web server
Web HMI
Modbus TCP and Modbus UDP protocols
Good communication security
Dual Watchdog
Operating temperature range: -25 to +75°C
I/O pair connection mirrors input to second output
2 x AI to load cell
1 x load cell excitation voltage out
2 x Digital out with counter
2 x Digital out (Open Collector)
Supply voltage: 10 - 30VDC / 3watt

534.79 €
Item numberETHIO3I4O-P-I
On the way in
High Speed ​​4 analogue inputs 128kHz sample rate, 24-bit, 2 analog output 12bit

4 single ended input +/- 10V analog, +/- 5V, +/- 2.5V ... +/- 20mV
128kS / s for each channel sampling rate
FIFO: 4000 samples - memory 30 million data samples
24bit resolution
2 x analog output +/- 10V, +/- 5V, 0-5 / 10V
analog output 12bit resolution
Trigger mode: SW, Ext analog
1 x 32bit counter, max. 30kHz
1 x Encoder input: Qadrant / CW / CCW and pulse
3 x digital inputs (wet) up to + 30VDC
4 x digital output (Open Collector) up to + 30VDC, 100mA
Overload protection up to 1.3A
1 x Ethernet port RJ45
Security: ID, password and IP filter
Powered by the PoE or 12 - 48VDC, 2,6W
Dimensions: 120 x 76 x 38 mm | Housing: Metal, with DIN bracket
Operating temperature: -25 - + 75 ° C

Call +45 56 66 20 20 for price
Item numberETHIO4AI2AO7IO-P-I
On the way in
8 x stressing, current and temperature measurement is +/- 10V, 0-20mA, TC, 16bit solution

8 analog measuring inputs - up to +/- 10V, 0-20mA
Thermocoupler: J, K, T, E, R, S, B, N, C, L, M LDIN43710
USB interface
to measure the voltage, current, temperature.
up to 10 measurements per second.
Screw Terminal

350.54 €
Item numberUSB-AD8S16
On the way in
8-channel True RMS Input module for Modbus RTU/DCON RS485

8-channel True RMS Input
±0.15% factory calibrated accuracy
The RMS input range can be from +150 mVrms to +10 Vrms
Designed for standard operation with frequencies of 45 Hz to 10 KHz
Channels can be individually configured

397.58 €
Item numberMOD485-IO8AI-RMS
Physically in stock
Showing 21-40 of 46 item(s)