There are 52 products.
4 port Web-based switch on and off equipment via LAN and Internet. Ping of stable web page is Router shutdown check

Web-based remote control of switching on/off via the Internet
Built-in Web Server. Username + Password
MQTT, Cloud, SNMP
APP for Smartphone
Watchdog with ping of stable website (Google etc.)
4 x 230 VAC sockets - IEC C-13 output 10A and C-14 input 15A.
Web server built-in - password-protected.
VPN Client
Supports: HTTP, HTTPS/SSL, TCP/IP, PPPOE, DHCP, DDNS, SNMP v3, SMTP, NTP, TLS
Supports: Cloud Connect : AWS IOT, GOOGLE Cloud IoT, Microsoft AZURE IOT
Dimensions: 195 x 116 x 45 mm
Rack fittings are purchased separately

282.61 €
Item numberNPOWER4
On the way in
Network-based device for switching on/off 230 VAC equipment. With lock-up control. Energy meter

Network-based device for switching on/off 230 VAC equipment.

Web server built-in - password protected

Can ping a stable IP address and if there is no response - turn equipment off and on

Timetable for on and off - scheduler

Mains socket is SCHUKO

168.30 €
Item numberNPOWER1+
On the way in
Relay box for on / off 230 VAC equipment via network. With lock-up control

Network operated relay box for switching on/off 230 VAC equipment
Shows current power consumption and ambient temperature on PC.
Web server built-in - password-protected.
With IP ping to stable website, it checks network outage.
If there is no response, it turns OFF/ON the desired external equipment.
ON/OFF can be controlled remotely from the browser.
Scheduled ON/OFF
HTTP, TCP/IP, DHCP, DDNS, SNMP v1, SMTP, NTP

203.14 €
Item numberNPOWER1+P
On the way in
Web-enabled temperature and moisture module for 1-wire sensors. Up to 16 Sensors with Log

Web-based temperature and moisture data loggs
1-wire bus for a maximum of 16 sensors (Temp / Moisture)
Permissions: Administrator, Manager, User
Tasks
50 Scheduled
50 Conditional
20 Override Schemes
Email Alarms, Custom (Encrypted Email Servers, such as Gmail)
Real Time Clock With NTP Server Synchronization
No Software Required
Basic Script Support for Advanced Flexibility
Configurable logging
Graph (logged data)
HTTPS / TLS encrypted
static or DHCP IP address configuration
Modbus, SNMP, Remote Service, IP filtration
On-site updates
Robust cabinet for DIN rail / wall
Supply voltage: POE or 9 - 28VDC, 134mA

524.07 €
Item numberX-405-E
Physically in stock
2G GSM controlled socket - Turn on and off with SMS message

REMAINING STOCK

2G GSM

Turn on/off via SMS messages

connected to a power outlet for GSM 2G network

Setup with phone number

Connects to 230vac

Max 10 amps

with Schuko plug

SIM card not included

133.33 €
Item numberTELEBOOT-GSM
Physically in stock
Rain sensor with pulse signal out

Rain sensor for weather station and alarms
Pulse signal When tilt container is filled with water
Making short contact between the 2 wires
Cable length: 2.8 meters
Dimensions: 150 x 60.5 x 92 mm (L x B x H)
distance between mounting holes: 135 mm

40.87 €
Item numberREGNSENSOR
Physically in stock
Environmental monitoring station for industrial and outdoor. CO CO2. Temperature and humidity, APP, display

CO2 - CO - temperature - humidity
Industrial / outdoor robust environment-measuring station
LCD color display
CO2 0-9999 ppm - electrochemical sensor
temperature of -20 - + 50 ° C, humidity 0 to 100% RH
dewpoint measurement based on the temperature and moisture
Up to 450,000 logs with date and time stamps
Web-based configuration interface
APP: iOS APP and Android APP, powerful software
DCON, Modbus RTU / TCP and MQTT protocols
RS-485 / Ethernet / PoE
Relay output for local alarm or building management
power supply: PoE and 12 - 48VDC ca. 3.5Watt
IP43 sealed enclosure (CO2 + temperature sensor)
Dimensions: 211 x 130 x 70 mm
DIN or wall mounting bracket

912.94 €
Item numberET-AIRCOCO2-I
On the way in
Environmental monitoring station for industrial and outdoor installations. CO2, particulate matter, temperature, humidity.
Industrial/outdoor rugged environmental measurement station
 Particle sizes down from 0.3μm to 10 μm
 CO2 0-9999 ppm - electrochemical sensor
 temperature of -20 - +50°C
 Humidity of 0 - 100% RH
 Dew point measurement based on temperature and humidity
 Up to 180,000 logs with date and time stamps
 Web-based configuration interface
 Efficient software: iOS APP and Android APP (free)
 DCON, Modbus RTU/TCP and MQTT protocols
 RS-485 / Ethernet / PoE
 Relay output for local alarm or building control
 Power supply: PoE and 12 - 48VDC approx. 3.5 watts
 IP43 sealed enclosure (CO2 + temperature sensor)
 Dimensions: 211 x 130 x 70 mm
 DIN or wall mounting bracket
test
991.33 €
Item numberET-CO2MULTI-I
On the way in
Light, Temperature and Humidity sensor with MODBUS RTU/TCP, Ethernet, RS485

Indoor light meter, temperature and humidity sensor 3 in 1

For energy optimization and building automation systems

Illumination measurement range: 0 to 20,000 lux

Temperature measurement range: -20 to +60°C

Humidity measurement range: 0 to 100% RH

Supports DCON and Modbus RTU/TCP protocols

Supports MQTT protocol for Ethernet interface

With RS485/RJ45 Ethernet communication interface

Relay output - 6 Amp@250VAC

Supply voltage: PoE and 10 - 48VDC, approximately 2 Watts

Operating temperature: 0 - +75°C

Web configuration and firmware update via Ethernet

Ceiling mounting

201.00 €
Item numberET-LUXMULTI-I
On the way in
Temperature sensor with 3 meter cable, -55 'C ~ + 125, stainless steel

Thermal sensor for mounting 3 meters
Sensor tip: stainless steel
Medium 3.0V - 5.5V supply
With new chip for each pin
BLUE pin: DATA
BLACK pin: GND
RED pin: VCC
1-wire (multiple to same pin)

36.05 €
Item numberGSM-IO-ENV-KT3
Physically in stock
1 channel leak detector RTU MODBUS, RS485, alarm relay

1 channel detection of fluid leakage with MODBUS
Shutter local alarm of detection of water leakage
Acoustic alarm - adjustable
RS485 2-wire MODBUS RTU
2 x LED indicators for power and alarm
Relay output for alarm for water leakage - 30VDC / 2A
Monitor cable for liquid detector
Sensor cable can be up to 500 meters
Sensitivity is adjustable
Supports DCON and Modbus RTU protocols
Embedded Dual Watchdog
Operating temperature: -25 to + 75 ° C
Small form factor with DIN bracket
Dimensions: 83 x 70 x 29 mm
Operating voltage: 10 - 30VDC

79.06 €
Item numberM485-LEAK1-I
On the way in
Temperaturføler føler til montering, måleområde: -10 til + 85° C, D...

Temperature sensor for mounting
10 m wire
Dallas DS18B20 Chip
With copper bracket for vertical mounting (M6, 6mm diameter mounting hole)
Measuring range: -10 to + 85 ° C Accuracy on +/- 1 ° C

62.44 €
Item numberGSM-IO-ENV-TC10
On the way in
Info kommer snarestforGSM

Ekstra tilbehør til GSM-IO-T

34.04 €
Item numberGSM-IO-T-ANT
On the way in
TSH202v3 - 1-Wire temperature and humidity sensor from Danbit

1-wire communications - several sensors can be connected to the same unit
± 3.0% relative humidity accuracy
± 0.4% relative temperature accuracy
12 bit resolution for humidity measurement
14 bit resolution for temperature measurement
Calibrated digital output
Eksellent long-term stability
Each sensor has its own unique 64-bit serial number

87.90 €
Item numberTSH202
On the way in
Ethernet I/O Module/MQTT/8DO/8DI/2 LAN/MQ-7244M, MQ-7252M, MQ-7255M

Built-in Web Server
Web HMI
Support for MQTT Protocol
2-port Ethernet Switch for Daisy-Chain Topology
Dual Watchdog
Operating Temperature -25 to +75°C
DI: 8 Channels
DO: 8 Channels

251.92 €
Item numberMQ-I8O8-I
Physically in stock
gude ENC2111

Connection for 2 external temperature sensors
Ethernet / Internet connection
Temperature alarm via SNMP or Syslog
Measuring range -10 to + 70 ° C
Watchdog with "ping" to IP address
Missing "ping" response activates relay output

402.00 €
Item numberETH-TEMP-C
Physically in stock
Advanced remote monitoring and control over networks - Gude - DANBIT

4 x potential-free shutter release, & 230VAC / 16 A, & 24VDC / 10 A
8 x passive signal inputs - contact inputs
1 x RJ45 Ethernet
4 x Watchdog to monitor connected devices (ICMP / TCP)
1 Mini-DIN connector for optional sensor or serial interface (RS232)
Programmable on / off sequence
SNMP Get / Traps (SNMPv1, SNMPv2c), Syslog, e -mail
APP for Android and iPhone
2-color LEDs for status info on front
DIN rail mounting

335.00 €
Item numberETH-TEMP-2302
Physically in stock
GSM control 2 relay out, 2xMOS output, 2x Analog 4x Digital inputs, 8x Temperature measurementIQTD-GS440

2 x 230VAC power relay /16A – resistive load.
2 x DC switched outputs up to 40VDC/6A, also as PWM for LED, FAN, etc.
2 x independent inputs: 230VAC and up to 24VAC/24VDC, SMS alerts for power failure
SIM card and SD card
Backup battery (not included) as an option – Li-Ion 3.7V (14500)
Switch appliances on and off with SMS messages
GPRS M2M function, TCP/IP Get to directly send input status to Server
Get XML status from server to set device outputs.
Scheduled automatic switching on and off of appliances
Sends power failure warning and recovery.
Restarting appliances, such as servers.
Monitoring of 2 x A/D inputs AC/DC voltages with autodetect
4 x digital inputs DIN1, DIN2, DIN3, DIN4 for DC voltage.
Universal bus (1-wire) for temperature and humidity sensors.
Thermostat function.
Alarm function: Temperature alarm, Humidity alarm, A/D limits, DI change
Alarm in case of jamming of a GSM signal.
Up to 12 alarm numbers, each can be set for different events
Up to 1000 authorized users and 2 administrator numbers.
Bluetooth
All inputs are SO compatible

303.38 €
Item numberGSM-IO-EN-F+
Physically in stock
Showing 21-40 of 52 item(s)