Item number ANR-FCU-3002A-WB-M

Media Converter Gigabit for single fiber and WDM mode, Multi Mode up to 550m, WDM-B, TX1550nm / RX1310nm, 5VDC

Gigabit WDM media converter for single-core fiber with SC connector

WDM-B - TX 1550nm / RX 1310nm

(must communicate with WDM-A at the other end of the fiber!)

IEEE 802.3/u/ab 10/100/1000BaseT

IEEE 802.3z 1000BaseX

Jumbo Frame (9K bytes)

Store-and-Forward Switching Mechanism

Auto-Crossover for MDI/MDIX in TP Port

Auto-Negotiation in TP Port

Flow Control

Link Alarm

Auto & Force Mode Configuration

Dimensions: 71 x 94 x 26 mm

5VDC/1.5A power supply included

Optional accessory: DIN bracket

540.29 €
Excl. VAT
Quantity
Physically in stock
file_download DOWNLOADS

Specifications

Operating Temp. 0° C to 50° C
Afstand FCU-3002A-SC: 550 m FCU-3002A-SC-S1: 10 Km FCU-3002A-SC-S2: 20 Km FCU-3002A-WA/WB-S1: 10 Km FCU-3002A-WA/WB-S2: 20 Km
Interface 10/100/1000BaseT: 1 x RJ45 Port 1000BaseX: 1 x Port
IP-Tæthed IP30
LED Power, FDX, Status, Speed, FO Link/ACT, TX Link/ACT
Luftfugtighed 5% to 95% (non-condensing)
Montering DIN skinne montering og væg montering
Standarder IEEE 802.3z 1000BaseX IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3x Flow Control
Strømforbrug 3 Watts
Strømforsyning External Power Supply: DC 5V, 1.5A
Weight 0.6 Kg
Certifications FCC Class A, CE

IMPORTANT INFORMATION:

A single fiber media converter uses only 1 fiber core for a 2-way data connection. The WDM-A version transmits (TX) at 1310nm and receives (RX) at 1550nm.

This means that 2 different light wavelengths are present in the same fiber core at the same time. The transmitter in one media converter (A) transmits on one wavelength - 1310nm and the other media converter (B) has a receiver that only responds to the 1310nm wavelength. In the opposite direction in the same fiber core, the transmit wavelength from the WDM-B version is 1550nm, and the receiver is 1310nm. The 2 different wavelengths do not interfere with each other, which results in a duplex (2-way simultaneous) data connection between the 2 media converters WDM-A and WDM-B.

The purpose is to minimise the number of fibers to just 1 fiber, so that 2 sets of media converters can be connected to a standard duplex fiber cable (2 fiber cores).

A connection over 1 fiber core requires:

1 pc. ANR-FCU-3002A-WA-AM

1 pc. ANR-FCU-3002B-WB-M 


Gigabit media converter RJ45 to 1-fiber multimode – BiDi/WDM-A, SC, 550 m

ANR-FCU-3002A-WA-AM is a Gigabit BiDi/WDM media converter that makes it possible to establish a full duplex Ethernet connection over just one multimode fiber core.

The media converter connects standard Ethernet network equipment to an optical fiber link and supports 10/100/1000 Mbit/s on the RJ45 port as well as 1000 Mbit/s on the fiber port.

Using WDM (Wavelength Division Multiplexing), the converter transmits and receives data simultaneously on two different wavelengths through the same fiber core.

The WDM-A version transmits at 1310 nm (TX) and receives at 1550 nm (RX). To establish a working connection, it must be used together with a compatible WDM-B converter that uses the opposite transmit and receive wavelengths.

The converter is particularly useful in installations where only one fiber core is available, for example when connecting network cameras, technical installations and network equipment over longer distances.


Benefits and applications

Single-fiber BiDi/WDM: Transmit and receive signals are carried simultaneously through one fiber core.

Efficient fiber utilisation: Reduces the number of fiber cores needed compared to traditional duplex solutions.

Gigabit Ethernet: Optical data transmission at 1000 Mbit/s.

Multimode up to 550 metres: Suitable for local network infrastructure, for example between buildings and technical rooms.

SC simplex connector: One fiber port for both signal directions.

Automatic RJ45 configuration: Auto-Negotiation and Auto MDI/MDI-X.

Store-and-Forward: Ethernet frames are received and checked before they are forwarded.

Jumbo Frame support: Handles Ethernet frames up to 9 KB.

Link Alarm and Flow Control: Supports monitoring of link status and regulation of data traffic.

The converter is supplied in a compact IP30 metal housing and can be used as a standalone unit or mounted on a wall or DIN rail with accessories.


What do TX 1310 nm and RX 1550 nm mean?

1310 nm and 1550 nm indicate the wavelengths of the infrared light that carries data through the fiber cable.

TX (Transmit) 1310 nm: The converter transmits data at the 1310 nm wavelength.

RX (Receive) 1550 nm: The converter receives data at the 1550 nm wavelength.

The corresponding WDM-B converter works the opposite way: It transmits at 1550 nm and receives at 1310 nm.

Because the wavelengths are different, the optical signals can be separated even though they travel through the same fiber core. This provides simultaneous two-way communication without the need for a separate fiber for each direction.