Item number RFID-D5USB-IDIC

RFID Card Reader 125KHz / 13.56MHz Dual Frequency, USB, 0-80mm Read Range

125KHz and 13.56MHz RFID card reader
Versions: 125KHz, 13.56MHz or both
Reads TK4001/EM4100 ID cards
Reads MF S50/S70 14443A IC cards
Reading distance: 0-80mm
Reading speed: 0.2s
USB interface, USB powered
Card number output to text editors
Default output: first 10 bits
Working current: 100mA
DC 5V (+/-5%)
98 x 63 x 10 mm

93.80 €
Excl. VAT
Quantity
Physically in stock
file_download DOWNLOADS

Specifications

USB USB communication interface
Anvendelse Access control, payment/consumption systems, hotel locks, water, electricity and gas meters, and other systems for handling ID and IC cards
Frekvens 125 kHz and/or 13.56 MHz. Available in 125 kHz, 13.56 MHz or 125 kHz+13.56 MHz (dual frequency) versions. Select frequency version when ordering
Læseafstand 0-80 mm
Læsehastighed 0.2 s
Strømforbrug Operating current 100 mA at 5V DC
Strømforsyning USB power supply, operating voltage DC 5V (±5%)
Dimensioner 9.8 x 6.3 x 1 cm
Supported cards TK4001/EM4100 and other ID cards (125 kHz), MF/S50/S70 and other ISO 14443A tags (IC cards, 13.56 MHz)
Data output Keyboard emulation: the card number is typed at the cursor in an open program (e.g. Notepad, Word or Excel). Default output is the first 10 digits
Package contents 1 pc RFID card reader + 1 pc USB cable

USB RFID Card Reader for 125 kHz ID and 13.56 MHz IC Cards

This USB RFID card reader reads ID and IC cards and sends the card number to a PC, for use in access control and card management systems. It is available in three versions: 125 kHz, 13.56 MHz, or dual frequency for both card types. Select the frequency before ordering.

Keyboard-Style Output Without Drivers or Software

The reader sends the card number as typed text. Open any editor, such as Notepad, Word or Excel, hold a card near the reader, and the number appears at the cursor. This makes it simple to connect to existing applications that accept keyboard input. By default the reader outputs the first 10 digits of the card number.

Support for Common ID and IC Card Types

The 125 kHz version reads ID cards such as TK4001 and EM4100. The 13.56 MHz version reads IC tags that use the 14443A protocol, including MF S50 and S70. Reading takes about 0.2 seconds at distances up to 80 mm. The reader is powered over USB at 5V, so no separate power supply is needed.