RS422 / RS485

RS422 / RS485

RS422 / RS485
There are 8 products.
USB to RS485 - Galvanically Isolated - DANBIT A / S

Get 1 piece. x RS485 or RS422 port via adapter connected to PC's USB port
Galvanic isolation (optical), 2KVolt
Baudrate up to & nbsp; 921.6 Kbit / s
Windows Win 7/8, Vista, Linux & Server 2000 to Server 2016 (WHQL certified)
Linux Kernel 2.4
Mac OS X 10.9, Driver Approved by Apple

97.28 €
Item numberCNV-USB-RS485I
Physically in stock
USB to RS485 / RS422 / RS232 adapter via the USB port, galvanically isolated

Get a RS485 or RS422 or RS232 port on the PC via the USB port
Galvanic isolation (optical) 2KV
DB9 male and screw terminal to 232/422/485 connection
Termination by Jumpers
Baud rate 300bit / s two 921.6 kbit / s
selectable RS232, RS422 and RS485 via DIP switch
Supports Win7 / 8/10 and over as well as MAC
Powered through USB (5V)
Operating Temp . 0 ° to 55 ° C,

153.43 €
Item numberCNV-USB-UNI-I
On the way in
USB to 1x RS422/485 converter, MOXA UPORT 1130forUSB - RS232/422/485

Get a RS485 / RS422 port on the PC via the USB port
Software for choosing a fixed COM port - very useful
Compatible with USB 2.0
12 Mbps USB data rate
921.6 kbps maximum baud rate
Driver for Windows, WinCE, and Linux
Mini DB9 male for terminal block adapter
LED for indication of USB and TxD / RxD activity
15 kV ESD protection for 2 kV optical isolation

215.47 €
Item numberCNV-USB-SER9+M3
On the way in
USB to 8 x RS232/RS422/RS485 adapter

Adds eight high-speed RS-232/422/485 serial ports via USB connection
2k bytes transmitter and receiver
Requires no IRQ, DMA, I/O port
RS-232 max bit rates of up to 1 Mbps
RS-422/485 maximum bit rates of up to 10 Mbps
Automatic transmission buffer control for 2-wire RS-485 half-duplex operation
Biasing and terminating resistors installed on board
Supported RS-232 signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
Supported RS-422 signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 4-wire signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 2-wire signals: Data-, Data+, GND
Data Bits: 7/8
Parity: None, Even, Odd, Mark, Space
Stop Bit: 1, 2
Flow Control: Hardware (RTS, CTS), XON/XOFF
Monitor LEDs for TxD, RxD indicating port status
Built-in AC to DC switching power supply, 100VAC to 240VAC
Virtual COM port drivers available for Windows 11, 10, 8.1, 8, 7, Vista, 2003, XP, 2000
Win Server: 2000 up to 2018, Linux, MAC
Industrial quality metal case with DIN bracket for DIN rail mounting

564.27 €
Item numberCNV-USB8UNI-R
Physically in stock
USB to RS422/485 adapter - Supports XP to Win11, Server 2008 R2 to 2022

USB to 1 x RS422 / RS485, w./ screw terminal

Max speed up to 921.6 Kbit/s - RS422 / 485 port

Select port type from DIL switch and jumper

Default set to RS422

Supports Win7, 8/8.1, 10, 11, Server 2008 R2, Server 2012 R2, 2022

(WHQL Certified)

71.69 €
Item numberCNV-USB-RS485+
Physically in stock
Convert USB to RS422 / 485 with isolation FTDI FT232RL. Windows 10

Get an RS485 or RS422 port on the PC via the USB port
Galvanic isolation (optical) 2KV - 3 x 6N137 IC chip
DB9 male and screw terminal for serial connection
Baud rate up to 921.6 Kbit/s
Selection of port type with DIP switch
Support Win 10, Android
FTDI chipset FT232RL

172.59 €
Item numberCNV-USB-UNI-I+
On the way in
MOXA UPORT 1150 USB to RS232/422/485 adapter with 1m cable

Get a COM port on the PC via the USB port

MOXA USB to RS232/422/485 converter.

Compatible with USB 2.0

Software selectable RS232, RS422, 4-wire RS485 and 2-wire RS485

Certified drivers for Windows, WinCE 5.0 and Linux

15 KV ESD protection

Supports Win11

216.01 €
Item numberCNV-USB-SER9+MIU
Physically in stock
USB to RS232 RS422 RS485 converterforSerial and Parallel

Connect RS232/RS422/RS485 equipment to USB port
Baudrate up to 921,6 kbit/s
Select type of port by DIL switch
Supports Win7/8/10, MAC

132.39 €
Item numberCNV-USB-UNI
On the way in
Showing 1-8 of 8 item(s)