There are 447 products.
DI/DO Expansion Module with 4x Wet Contact DI, 4x Open Collector DO, 2x RS-232

4 x Digital Input, Wet Contact
4 x Digital Output, Open Collector
Isolation 3750 Vrms
2 x RS-232 Ports
FIFO 16 bytes buffer
Load Current 200mA/channel
Overvoltage Protection 60VDC
Consumption 0.5W Max.
Dimensions: 66 x 82 x 17 mm
-25/+75C (special components required)
Storage: -30 to 75C
Humidity: 10-95% RH, non-condensing

84.42 €
Item numberDI-DO-EXPAN-MODUL-2
On the way in
Isolated DC/DC Power Supply 18-36VDC to 24VDC 400mA

Output 24VDC 400mA (max)
Isolation 1000VDC
Ripple noise 100mVp-p max
Linearity ±0.5% max
Accuracy ±2%
Efficiency 83% max
Short circuit protection
Humidity 5-95% non-condensing
Input voltage 18-36VDC (unregulated)
-25-70C (special components required)
Dimensions 25 x 114 x 70 mm

115.24 €
Item numberISOLA-DC-DC-POWER
On the way in
RS-485 I/O Expansion Unit with 2x I-87K Slots, DCON Protocol

Intelligent RS-485 I/O expansion unit
2 slots for I-87K series I/O modules
Isolated RS-485 port, 3000VDC
DCON protocol, ASCII format
Baud rate up to 115200 bps
2 x 16-position rotary switches
8-bit DIP switch for configuration
Status LEDs: Power, System, Config
DIN-rail or wall mounting
10-30VDC input, 1.0W consumption
-25-75°C (special components required)
95 x 132 x 111 mm (WxLxH)

261.30 €
Item numberRS-485-EXPAN-UNIT-5
On the way in
AC/DC Current & Voltage Sensor, 200A / 100VDC, Clip-On, DIN-Rail

High current channel: +-200A, 1% FSR
High voltage channel: +-100VDC, 1% FSR
Current bandwidth: 0-50 kHz
Voltage bandwidth: 20 Hz - 20 kHz
Clip-on type, inside diameter 21mm
Leading cable length: 1.5 m
Output: +-10VDC or 10VAC
Isolation: 2.5kV @ 50/60Hz, 1 min
ESD IEC 61000-4-2, Surge IEC 61000-4-5
Input: 10-30VDC, 1.8W
Metal casing, DIN-rail mounting
103 x 93 x 29 mm

261.30 €
Item numberAC-DC-CURRE-VOLTA-2
On the way in
8-Slot RS-485 I/O Expansion Unit, I-87K Series, DCON Protocol

8-slot I/O expansion for I-87K modules
1 x RS-485 port, 3000VDC isolation
DCON protocol (ASCII format)
Baud rate up to 115200 bps
2 x 16-position rotary switches
8-bit DIP switch for configuration
LEDs: Power, System, Config, Slot
64-bit hardware serial number
DIN-rail / wall mounting
10-30VDC, 2.0W consumption
-25~+75C (special components required)
312 x 132 x 111 mm

318.92 €
Item numberSLOT-RS-485-EXPAN-6
On the way in
RS-485 I/O Expansion Unit, 4-Slot, I-87K Series Support

4-slot I-87K I/O expansion unit
DCON protocol (ASCII format)
1 x RS-485 port, 3000VDC isolation
Baud rate up to 115200 bps
2 x 16-position rotary switches
8-bit DIP switch for config
64-bit hardware serial number
LED status: Power, System, Slot
DIN-rail or wall mounting
+10-30VDC, 2.0W consumption
-25-75C (special components required)
188 x 132 x 111 mm

298.82 €
Item numberRS-485-EXPAN-UNIT-6
On the way in
Current and Voltage Sensor Clip, 200A / 600VDC, DIN-Rail

High current channel: +/-200A, 1% FSR
High voltage channel: +/-600VDC, 1% FSR
Current bandwidth: 0-50kHz
Voltage bandwidth: 20Hz-20kHz
Clip type, inside diameter 21mm
Leading cable 1.5m
Output: +/-10VDC or 10VAC
Isolation 2.5kV @ 50/60Hz, 1 min
ESD IEC 61000-4-2, Surge IEC 61000-4-5
Input 10-30VDC, 1.8W
25 to 75C (special components required)
103 x 97 x 29 mm, DIN-Rail metal casing

259.96 €
Item numberCURRE-VOLTA-SENSO-CLIP
On the way in
RS-485 I/O Expansion Unit, 1 Slot for I-87K Series Modules

1 slot for I-87K series I/O modules
1 x RS-485 port, 3000VDC isolated
DCON protocol (ASCII format)
Baud rate up to 115200 bps
2 x 16-position rotary switch
8-bit DIP switch, auto config
64-bit hardware serial number
10-90% RH, non-condensing
+10-30VDC power input
Power consumption: 1.0W
-25 to +75C operating temp
Dimensions: 64 x 120 x 111 mm

249.24 €
Item numberRS-485-EXPAN-UNIT-4
On the way in
Clamp-On Current/Voltage Sensor, 2000A / 600VDC, DIN-Rail

High current: +/-2000A, 0-50kHz
High voltage: +/-600VDC, 20Hz-20kHz
Accuracy: 1% of FSR (both channels)
Clip type, inside diameter 40.5mm
Leading cable 1.5 m
Output: +/-10VDC or 10VAC
Isolation 2.5kV @ 50/60Hz, 1 min
ESD IEC 61000-4-2, Surge IEC 61000-4-5
Metal casing, DIN-Rail mounting
10-90% RH non-condensing
25 - 75C (special components required)
10-30VDC, 1.8W, 103x97x29mm

317.58 €
Item numberCLAMP-CURRE-VOLTA-SENSO
On the way in
High Current & Voltage Clamp Sensor, 50A / 600VDC, DIN-Rail

High Current Range: +-50A, 1% FSR
High Voltage Range: +-600VDC, 1% FSR
Current Bandwidth: 0-50 kHz
Voltage Bandwidth: 20 Hz - 20 kHz
Clip Type, Inside Diameter Phi 21 mm
Leading Cable 1.5 m
Output: +-10VDC or 10VAC
Isolation 2.5 KV @ 50/60 Hz, 1 min
Metal Casing, DIN-Rail Mounting
10-90% RH Non-condensing
25 to +75C (special components required)
10 - 30VDC, 1.8W

249.24 €
Item numberHIGH-CURRE-VOLTA-CLAMP
On the way in
IEPE Vibration Sensor 1-Axis, ±80g, 0.5Hz~15kHz, IP68

IEPE single axis vibration sensor
Amplitude range: +/-80g
Frequency range: 0.5Hz~15kHz
Sensitivity: 100mV/g
Bias voltage: 10~14VDC
Input range: 18~30VDC, 2~10mA
IP68 rated (without cable)
Cable length: 6m
Dimensions: Dia 22.9 x 53.3 mm

820.08 €
Item numberIEPE-VIBRA-SENSO-AXIS-2
On the way in
Current & Voltage Transducer, Clip-On 1000A / 600VDC, DIN-Rail

Clip-on current and voltage sensor
High Current range: +/-1000 A
High Voltage range: +/-600 VDC
Accuracy: 1% of FSR
Current bandwidth: 0-50 kHz
Voltage bandwidth: 20 Hz-20 kHz
Inside diameter: 40.5 mm clip
Leading cable: 1.5 m
Output: +/-10 VDC or 10 VAC
Input: 10-30VDC, 1.8W
DIN-rail mount, metal casing
103 x 97 x 29 mm

296.14 €
Item numberCURRE-VOLTA-TRANS-CLIP
On the way in
Current & Voltage Probe, Clip Type 500A / 100VDC, DIN-Rail

High Current: 1 ch, +/-500A, 1% FSR
High Voltage: 1 ch, +/-100VDC, 1% FSR
Bandwidth Current: 0-50kHz
Bandwidth Voltage: 20Hz-20kHz
ESD IEC 61000-4-2: +/-4kV contact
Surge IEC 61000-4-5: +/-3kV
Isolation: 2.5kV @ 50/60Hz 1min
Clip type, inside dia. 21mm
Leading cable 1.5m
Metal casing, DIN-Rail mount
Input 10-30VDC, 103 x 93 x 29 mm
25 to 75C (special components required)

272.02 €
Item numberCURRE-VOLTA-PROBE-CLIP
On the way in
24V Step Relay 2x Form A, 20A @ 250VAC, DIN-rail

2 x Form A relay channels
24V Step Relay type
Contact material AgSnO2
Contact rating 20A @ 250VAC
Electrical endurance 50 x 10^3
Mechanical endurance 500 x 10^3
Input range 21.6 - 56.4VDC
DIN-rail mounting
Operating temp 40-70C
Storage temp 40-70C
Dimensions 84 x 17.4 x 58.4 mm

69.68 €
Item number24V-STEP-RELAY-2X
On the way in
IEPE Vibration Sensor, 1-Axis, ±80g, 0.5Hz-15kHz, IP68

1-axis IEPE vibration sensor
Amplitude range +/-80g
Frequency range 0.5Hz - 15kHz
Sensitivity 100mV/g
Bias voltage 10-14VDC
Input range 18-30VDC, 2-10mA
IP68 rated (without cable)
Cable length 3m
Dimensions: Dia. 22.9 x 53.3 mm

789.26 €
Item numberIEPE-VIBRA-SENSO-AXIS
On the way in
16-Channel DI/DO Expansion Module, Open Collector Sink

16 x Open Collector Digital Output
Sink Type Output
Load Voltage +10 to +50VDC
Load Current 350mA/channel at 25C
Overload Protection 1.4A
Isolation 3750VDC
Consumption 0.2W
66 x 82 x 13 mm (W x L x H)
-25~75C (special components required)
Storage -30 to +75C
Humidity 10-95% RH non-condensing

107.20 €
Item number16-CHANN-DI-DO
On the way in
RS-485 I/O Expansion Unit, 5-Slot High Profile I-87K

High profile I-87K I/O expansion
5 expansion slots
RS-485 port, 3000VDC isolated
DCON protocol support
115200 bps max baud rate
DIN-rail or wall mounting
Power consumption 2.0 W
Humidity 10-90% RH non-condensing
-25-75°C (special components required)
Storage -30-75°C
+10-30VDC power input
Dimensions 231 x 111 x 75 mm

206.36 €
Item numberRS-485-EXPAN-UNIT
On the way in
4-Slot RS-485 I/O Expansion Unit, High Profile, DCON Protocol

4 slots for high profile I/O modules
1 x RS-485 port, 3000VDC isolated
DCON protocol, up to 115200 bps
DIN-rail or wall mounting
Storage temp -30 to +75C
Operating temp -25 to +75C
Humidity 10-90% RH, non-condensing
Power consumption 2.0W
+10-30VDC power input
Dimensions 231 x 111 x 75 mm

195.64 €
Item numberSLOT-RS-485-EXPAN
On the way in
8-Slot RS-485 I/O Expansion Unit, High Profile I-87K, DCON Protocol

High profile I-87K, 8 slots
1 x RS-485, isolated 3000VDC
DCON protocol, 115200 bps max
DIN-rail or wall mounting
Humidity 10-90% RH, non-condensing
Operating temp: -25 to +75C
Storage temp: -30 to +75C
Input +10-30VDC, 2.0W
Dimensions: 354 x 111 x 75 mm

233.16 €
Item numberSLOT-RS-485-EXPAN-4
On the way in
3-Axis MEMS Vibration Sensor, ±18g, IP67, 10Hz-1KHz

3-axis MEMS vibration sensor
Amplitude range +/-18g
Frequency range 10Hz-1KHz
Sensitivity 400mV/g per axis
Bias voltage 10+/-0.5VDC
Cable length 1.5m
IP67 rated housing
22-26VDC, 3mA
15 x 21 x 8.5 mm (W x L x H)

479.72 €
Item numberAXIS-MEMS-VIBRA-SENSO-3
On the way in
Showing 241-260 of 447 item(s)