Item number WIREL-DATA-CONCE-433MH

iWSN Wireless Data Concentrator, 433MHz RF, RS-485/RS-232, Modbus RTU

433MHz wireless data concentrator
16 channels via rotary switch
RS-485 and RS-232 (not simultaneous)
Modbus RTU protocol
Node address 1 to 31
Baud rate up to 115200bps, N81
TX power 9dBm (PA off) / 18dBm (PA on)
Range up to 100m line of sight
DIN-Rail installation
10-30VDC, 1W max
108 x 84 x 33 mm
-25 to 75C, 10-90% RH non-condensing

292.12 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail
Type 0 dBi, Omni-Directional
Connector RP-SMA Male (Plug)
Operating Temperature 25 ~ +75°C
Status 1 x Power1 x RF_Tx1 x RF_Rx
Ports 1 x RS-4851 x RS-232(Cannot be used simultaneously)
Consumption 1W Max
Dimensions (mm) 10 x 108 (Ø x L)108 x 84 x 33 (W x L x H)
Storage Temperature 30 ~ +80°C
Humidity 10 ~ 90% RH, Non-condensing
Input Type +10 ~ +30 VDC
ESD (IEC 61000-4-2) +/- 4kV Contact
Channels 0 ~ 15 (configured by rotary switch)
Baud Rate 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200bps, N81
Protocol Modbus RTU
Transmission Power 9±1dBm (PA Off) / 18±1dBm (PA On)
Transmission Distance (LoS) 100m (Line of sign, LoS)
EFT (IEC 61000-4-4) +/- 1kV
Surge (IEC 61000-4-5) +/- 1kV
Node Address 1 ~ 31
Radio Frequency 433MHz

Wireless Data Concentrator

This wireless data concentrator is used to collect and forward data from wireless sensors and devices in industrial networks. It acts as a bridge between wireless RF nodes and a wired Modbus RTU network, making it suitable for monitoring and control in production facilities and infrastructure.


433MHz RF · RS-485/RS-232 · Modbus RTU · DIN-Rail


Features for reliable data collection

  • 16 channels - easily configured via rotary switch without software setup
  • Adjustable transmission power - 9dBm or 18dBm depending on range and conditions
  • Dual serial connectivity - supports RS-485 and RS-232 for flexible integration
  • Noise resistant - protected against EFT, ESD and surge per IEC standards
  • Wide operating temperature - reliable operation from -25°C to 75°C


Applications in industrial environments

The product is suited for tasks where wireless communication needs to connect with a wired Modbus network without long cable runs.

  • Monitoring distributed sensors in production halls
  • Wireless data collection in warehouses and distribution centers
  • Integrating RF nodes into existing SCADA systems
  • Remote monitoring of equipment in hard-to-reach areas


A robust and flexible solution for wireless Modbus communication in demanding industrial environments.