Wireless Sensor Networks

Wireless Sensor Networks

Wireless sensor networks are used to collect measurement data from points where running cables is expensive or impractical. A wireless concentrator gathers signals from multiple sensors over radio and forwards them to a controller or SCADA system via RS-485, RS-232 or Modbus RTU. Typical applications include energy metering and power monitoring in buildings and production facilities where sensors are spread across a wide area.

Choose based on the range and frequency of the radio link, typically 433MHz, and how many sensors or loops the concentrator can handle. For power meters, check the number of phases, the voltage range and how many measurement circuits the module supports. Also verify which protocol the concentrator uses to communicate with the higher-level system, so it matches your existing data acquisition setup.

Wireless Sensor Networks
There are 3 products.
iWSN Wireless Data Concentrator, 433MHz RF, RS-485/RS-232, Modbus RTU

433MHz wireless data concentrator
16 channels via rotary switch
RS-485 and RS-232 (not simultaneous)
Modbus RTU protocol
Node address 1 to 31
Baud rate up to 115200bps, N81
TX power 9dBm (PA off) / 18dBm (PA on)
Range up to 100m line of sight
DIN-Rail installation
10-30VDC, 1W max
108 x 84 x 33 mm
-25 to 75C, 10-90% RH non-condensing

292.12 €
Item numberWIREL-DATA-CONCE-433MH
On the way in
Wireless Power Meter Sensing Module, 1P2W, 58-277VAC, 6 Loops

Wireless power sensing module
1P2W-1CT wiring, 6 loops
Input: 58-277VAC single phase
Current input: 1A - 400A via CT
True RMS V/I, kW, kWh, PF, Hz
Wh accuracy better than 2%
RF 433.1-434.6 MHz
Transmission distance 100m LoS
Data update 1/10/30/60 sec
IP33, 30C to +50C operating
85 x 184 x 47 mm
Consumption 3W

577.54 €
Item numberWIREL-POWER-METER-SENSI
On the way in
iWSN Wireless Power Meter Module, 3-Phase 100-480VAC, RF 433MHz

Wireless power sensing module
True RMS voltage, current, power
Active energy kWh, power factor
Input 100-480VAC (58-277VAC 1P)
Current 1A-400A via split core CT
RF 433.1-434.6 MHz, 100m LoS
Wiring 3P4W, 3P3W, 1P2W, 1P3W
Wh accuracy better than 2%
IP33, wall-mount installation
0C to 50C operating temperature
3W consumption
85 x 184 x 47 mm

659.28 €
Item numberWIREL-POWER-METER-MODUL
On the way in
Showing 1-3 of 3 item(s)