Item number TEST-LAN-M-P
Multifunctional network tester - Test network cables for faults
Tests Cat. 5, 5E, 6 and 7 network cables
Accuracy: ±2m for cables under 10 meters, ±5% for cables over 10 meters.
Test length for cables: 1 ~ 300 meters.
Port Flicker function to find the port it is connected to
Operating temperature: 0°C – 50°C
Storage temperature: -30°C – 50°C
Humidity: 10% - 90%
166.56 €
Excl. VAT
Quantity
On the way in
Specifications
| Operating Temp. | 0ºC~50ºC ved luftfugtighed 10~90 % |
|---|---|
| Batteri | Benytter 4 x AAA batterier (medfølger ikke) |
| Porte | 2 x RJ45 porte på testeren, 1 x RJ45 port på fjernenhederne (4 stk. medfølger) |
TEST-LAN-MP is a handheld multifunctional network tester with integrated on- or offline testing of cables, devices, lengths.
In offline test mode , TEST-LAN-MP operates as a cable tester.
In addition to the network tester, 8 remote modules are included to attach to the cable at the opposite end, so that TEST-LAN-MP can test network cables that have already been laid.
Furthermore, TEST-LAN-MP has an integrated digital tone generator and a port finder (Port Flicker) function to track and identify cables.
Cables that are configured differently than regular network cables can be "learned" by TEST-LAN-MP and then tested.
Displays Ethernet port status and can determine speed up to 1 Gigabit (10/100/1000 Mbps).
The connections in the cable are shown in a pin-to-pin format.
The tester itself recognizes the remote devices by ID number 1 – 8.
Tests Cat. 5, 5E, 6 and 7 network cables.
Low battery indication and automatic screen off to save power.
Test length for cables: 1 ~ 300 meters.
Accuracy: ±2m for cables under 10 meters, ±5% for cables over 10 meters.
Other products in the same category:
Smart network tester, PoE, Length, Cable search, Port flash on switch. Passage test
PoE 802.3 at/af type a/b and non-standard PoE 5~60V
Measurement of cable length (2.5 ~ 200m). Accuracy: ±1.6m
Continuity test: Shows diagram of the conductors in the cable. Range: 600m
With special flash sequence, switch port can be identified
Can show speed on switch port.
Can show auto negotiate on switch.
Scan: Sends a tone over the cable that can be intercepted. Makes it easy to find the right cable, among other cables.
Battery: 3 x AAA, 1 x 9V (not included)
133.73 €
Item number:TEST-RJ45-POE-L-S
Smart network tester, cable search, passage test
Scan: Sends a tone over the cable that can be intercepted. Make it easy to find the right cable, among other cables.
Review Test: Sends a signal through each manager and shows where the signal comes out at the other end of the cable.
Battery: 2 x 9V (not included)
41.94 €
Item number:TEST-RJ45-S
Network Cable Tracker and Tester for RJ45/RJ11 with Anti-Interference, PoE Test, Scan
RJ45/RJ11 cable tracer and tester
Normal and anti-interference tracing
Length, crimp and line sequence test
Speed test 10/100/1000M, duplex
PoE test: standard and non-standard
Wireless Scan Function
Port flashing, duplex/auto-neg detect
RJ45 8-core withstand voltage test
Receiver: NCV, flashlight, headphone
2.4-inch color screen
1500mAh battery
USB Type-C power, 5V/1A
Approx. 152 x 68 x 31 mm
167.50 €
Item number:TEST-RJ45-POE+





