Item number ETHER-MODUL-32-OPEN
EtherCAT I/O Module with 32 x Open Collector PNP Output, DIN-Rail
32 x Open Collector Output (PNP)
Load Voltage +10~+40VDC, 500mA/CH
Isolation 2500VDC
2 x RJ-45 Ports (100Base-TX)
100m Max Distance Between Stations
Cycle Time 200us, Distributed Clocks
EFT/ESD/Surge Protected (IEC 61000)
DIN-Rail Mount, Plastic Casing
Input Range +10VDC ~ +30VDC
-25~+75C (special components required)
90 x 33 x 110 mm (WxLxH)
Humidity 10-90% RH
222.44 €
Excl. VAT
Quantity
On the way in
Specifications
| Installation | DIN-Rail |
|---|---|
| Isolation | 2500 VDC |
| Type | Open Collector (Source , PNP) |
| Operating Temperature | 25 ~ +75 °C |
| Ports | 2 x RJ-45 |
| Input Range | +10 VDC ~ +30 VDC |
| Consumption | 1.5 W Max. |
| Dimensions (mm) | 90 x 33 x 110 (W x L x H, without connectors) |
| Storage Temperature | 30 ~ +80 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
| ESD (IEC 61000-4-2) | ± 4 kV Contact for Each Channel |
| Channels | 32 |
| Load Voltage | +10 VDC ~ +40 VDC |
| Load Current | 500 mA/Channel |
| Casing | Plastic |
| EFT (IEC 61000-4-4) | Signal: ±1 kV Class A; Power: ±1 kV Class A |
| Surge (IEC 61000-4-5) | ± 1 kV Class A |
| Cycle Time | 200 us |
| Distance Between Stations | 100 m Max. (100Base-TX) |
| Data Transfer Medium | Ethernet/EtherCAT cable (Min. CAT5), shielded |
| Distributed Clocks | Yes |
EtherCAT I/O Module
This EtherCAT I/O module provides 32 channels of open collector PNP output for industrial automation systems. It is designed for reliable digital output control in demanding environments and integrates directly into EtherCAT networks via dual RJ-45 ports.
32 Channels · 2500VDC Isolation · 200us Cycle Time · DIN-Rail Mount
Key Features and Benefits
- 32 Open Collector Outputs - high channel density for compact control cabinets
- 2500VDC Isolation - protects connected equipment from electrical noise
- Distributed Clocks - enables precise synchronization across EtherCAT nodes
- Wide Temperature Range - operates reliably from -25C to +75C
- Robust EMC Protection - tested against EFT, ESD and surge per IEC 61000
Typical Applications
The module suits automated production lines and control systems where high-density digital output is required.
- Factory automation
- Machine control panels
- Process control systems
- Industrial robotics
A reliable, high-density EtherCAT output solution built for demanding industrial environments.
Other products in the same category:
Ethernet Module with Modbus TCP/IP. 2 x digital input, 2 x power relay output, I/O Pair connection, 12 - 48VDC
Ethernet I/O module Modbus/TCP / UDP slave
1 x RJ45 Ethernet
Redundant Power Supply
Protocol: TCP, UDP, HTTP, DHCP, BOOTP and TFTP
Web configuration and firmware update via Ethernet
2 x digital input (Wet - volts supplied)
2 x Relay, COM, NO - 250VAC 5A, 30VDC 5A
Avoid inductive load to relay contacts
With locked DI and 32-bit 3.5kHz counter
With I/O pair - input is mirrored in the other's output
Dual-watchdog with Power-on-safe value
Supply voltage: 12 - 48VDC, 1.7 Watt
Dimensions: 98 x 52 x 27 mm
Operating temperature: -25 - +75°C
129.31 €
Item number:ETH-MOD2I2R-I
8 x Digital inputs Wet 0 - + 50VDC 500Hz, 8 x Digital output (OC) + 40VDC 650mA, 2 x RJ45, Modbus TCP/UDP, 12 - 48VDC
Built-in Web server
Web HMI
Modbus TCP and Modbus UDP protocols
Good communication security
Dual Watchdog
Operating temperature range: -25 ~ + 75 ° C
I/O Pair connection - the input is mirrored in the other's output
8 x Digital input (count): 0 - + 50VDC (500Hz)
8 x Digital Outputs: Open Collector 0 - + 40VDC / 650mA per output
2 x RJ45 Ethernet - daisy chain
Supply voltage: 12 - 48VDC / 4Watt
308.20 €
Item number:ETHIO8I8O-2I
12 x Digital inputs and 6 x Digital outputs. 1 x RJ45 Ethernet. Modbus/TCP / Modbus/UDP. Pair-compound, 10 - 30VDC
Built-in Web server
Web HMI
Support for both Modbus TCP and Modbus UDP protocols
Communications Security
1 x RJ45 Ethernet port
Double watchdog
Operating temperature range: -25 to +75°C
I/O pair connection, the input is mirrored in the other's output
Built-in I/O
12 x Digital input: Wet / Dry, 0 - + 50VDC
All entries are 32-bit counter 500Hz
6 x digital output: Open Collector 0 - + 30VDC / 100mA
Supply voltage: 10 - 30VDC
248.97 €
Item number:ETHIO12I6O-I
6 x Digital input, 6 x Relay output via Ethernet for industrial control applications. 1 x RJ45 PoE
6 x Digital Inputs - Wet (active at DC in)
6 x Power relay outputs - 24VDC / 250VAC / 5A
Protocol: Modbus TCP / UDP
1 x RJ45 Ethernet interface with PoE in
I / O Pair-function - the input is mirrored to the second output
Digital inputs with counter - max 500Hz
the minimum pulse width: 1 ms
Screw terminal
Supply voltage: PoE or 10 - 30VDC / 3watt
269.74 €
Item number:ETHIO6I6PR-P-I
Ethernet module with 2 contact inputs, 1 relay output, PoE
Ethernet module with 2 digital inputs and 1 relay output
2 x digital dry contact - active high by connecting contact
1 x Power relay, 250vac / 5a, 30vdc / 5a
Avoid inductive load to relay
P2P Function that reflects an input to other module output
Supports Modbus / TCP and UDP Slave
Power supplied from PoE or 12 - 48VDC
PoE: IEEE802.3af, Class 1
Operating temperature: - 25 - + 75 ° C
Dim: 98 x 52 x 27 mm
DIN bracket
151.82 €
Item number:ETH-MOD2I1R-P-I
5 x relay outputs (closing contact COM, NO) 30VDC 5A, 250VAC 5A, 4 x digital inputs, RS485 bus, 10 - 30VDC
RS485 I/O module with 4 digital inputs and 5 relay outputs
4 x Digital input (wet) active with voltage in
Digital input as 16 bit counter - 100Hz
5 x Relay output - COM, NO
Supply: 10 - 30VDC
YOUR
162.01 €
Item number:M485-REL5-I
8 x DI Wet/Dry 0 - +50VDC 500Hz, 8 x DO +40VDC 650mA, 2 x RJ45, Modbus TCP/UDP, PoE and 12 - 48VDC
Built-in Web server
Web HMI
Modbus TCP and Modbus UDP protocols
Good communication security
Dual Watchdog
Operating temperature range: -25 ~ + 75 ° C
I/O Pair - Input Mirrors at the second's output
8 x Digital input (counter): 0 - + 50VDC (500Hz) - Wet / Dry
8 x Digital output: Open Collector 0 - + 40VDC / 650MA per Ch
2 x RJ45 Ethernet - Daisy Chain
Supply voltage: POE or 12 - 48VDC / 4Watt
432.95 €
Item number:ETHIO8I8O-P2I+








