Item number X-420-E
Web enabled multi I/O module, 4 x analog in 16bit, log, 2 x digital I/O, 1-wire bus, 1 x RJ45, Modbus/TCP, PoE
4 x analog inputs with common GND
input voltage: ± 1.28V, ± 2.56V, ± 5,12V, ± 10,24V
Input current: 4-20mA - 200 Ohm Shunt resistance
2 X digital inputs / outputs: 0 - 5VDC
Digital I/O and Counter set up via the web server
1-wire bus for a maximum of 16 sensors
Temp/moisture/ultrasound, etc.
ermissions: Administrator, Manager , User
Tasks
50 Schedule Scheduled
50 Conditional
20 Torrect Scheduled
Email Alarms Based on Defined Terms
Supports Encrypted Email Servers, such as Gmail
RTC with NTP server synchronization
Basic script support for advanced flexibility
Logging and graph view
static or DHCP IP Address configuration
Modbus, SNMP, Remote Service, IP Filtering
871.67 €
Excl. VAT
Quantity
On the way in
X-420-E is a fully equipped, Ethernet I / O Monitoring and data collection module with an innovative solution for creating logical tasks without the need for scripting.
Monitor and log up to 100 inputs and / or outputs from Up to 32 external I / O modules using the X-420-E's intuitive web interface. PUSH sensor data for other controlbyweb modules. No software required, no programming required and no subscription to buy. 4 analog inputs (multifunction) ± 1.28V, ± 2.56V, ± 5.12V, ± 10.24V, 4-20mA. Can be configured for single-ended, 2 channel differential or 4-20mA (0-20MA) input operation. Monitor industrial sensors, wind direction sensors, pyranometers, pressure transducers and much more.
2 Digital I / O can be configured as inputs or outputs (0-5VDC). Inputs: Monitor Dry Contacts including push buttons, magnetic door alarm contacts, microcontacts, etc. Outputs provide a digital logical signal that can be connected to a solid state relay for control engines, pumps, light, etc. 1-wire bus to max. 16 Temperature / humidity sensors .
frequency counter ac coupled frequency input to e.g. Magnetic wind speed sensor, transformer, etc.
X-420-E support peer-to-peer communication between ControlByWeb modules. It communicates with up to 32 modules and allows you to monitor and control up to 100 I / O points. X-420-E can communicate with all ControlByWeb devices, with immediate message between products in the X-400 series, which means that X-420-E can monitor and control I / O on other products in the X-400 series, which whether it was directly connected to module.
Task Builder (Task Builder) X-420-E's built-in interface allows you to create custom "tasks" for simple and advanced control logic. Easily create tasks based on input or output status. Create up to three actions for each task, so you get the ultimate control and monitoring solution for your application.Opet up to 50 scheduled, 50 conditional and 20 overlay plans.
Conditional tasks are triggered depending on input or output status. Conditional tasks are often used to create alarms, check output and log. Scheduled tasks perform actions on preset times at specific days. Scheduled tasks are often used to log I / O data at a certain time or to control digital outputs. X-420-E contains a Basic script interpreter. This allows you to create scripts that calculate analog parameters or create advanced control logic.
Logging: X-420-E allows you to log a number of data points as local and external I / O, registers and excitement. Logging can be made with preset intervals, scheduled times, triggered by I / O changes or logical events. Plan a daily log file to be sent by e-mail or uploaded via FTP server.
Graphing: Show a graph of the current log file and see I / O's status over time.
24VDC 1.7A (40Watt) power supply from 100-240VAC, DIN rail
AC / DC power supply for DIN rail mounting
100-240V AC, 50 / 60Hz, 1.1A
Output, 24V, 1.7A (40 Watt)
Screw terminal
Adjustable output voltage
Short-circuit, overload and surge protection
Compact dimensions: 40 x 100 x 90 mm
Working temperature: -20-70 ° C
44.89 €
Item number:DC24V1.7A-D
24VDC 60W Power supply from 85VAC-264VAC. 24V / 2.5A, adjustment 21.6-29V, DIN mounting
AC / DC power supply for your rail mounting
AC Input: 85 - 264Vac
Effect: 60W
Output voltage: 24V / 2.5A
Screw terminal
Adjustable output voltage for 24 to 29V
Working temperature: -30 - + 70 ° C
Dimensions: 90 x 54.5 x 62.5 mm (H, D, B)
48.91 €
Item number:DC24V2.5A-D
24VDC 60W power supply. Ultra wide AC input from 180VAC-550VAC. 24V/2.5A, Fine adjustment from 24-29V, DIN mounting
AC/DC power supply for DIN rail mounting
AC input: 180 - 550VAC
Power: 60W
Output voltage: 24V / 2.5A
Screw terminal
Adjustable output voltage to 24 to 29V
Working temperature: -30 - +85°C
Dimensions: 125 x 102 x 32 mm (H, D, W)
95.94 €
Item number:DC24V2.5A-D+
Other products in the same category:
Web-enabled Volt / 4-20mA output module over LAN and Internet. 5 x analog +/- 10V, 4-20mA 16bit - Individual scaling, 9 - 28VDC
Network-based analog output Module
5 x Separate analogue output channels
Output signals: 0-5V, 0-10V, ± 5V, ± 10V, 4-20MA
The output signals are software configured
output signals are independently programmable and scalable
built in isolated DC-DC Supply
Voltage supply: 9 - 28VDC / 5WATT
No special software or device drivers Required
Password Protected Web setup and control pages
Static or DHCP IP address
XML and Modbus / TCP
can be updated on site
removable terminal connector
828.52 €
Item number:X-317-I
Web-based I/O controller with add-on up to 32 I / O modules. With peer-to-peer communication. Conditions, scheduled, logic
Expansion bus - up to 32 I/O modules or remote modules up to 100 I/O
Peer-to-Peer communication (P2P)
1-wire bus: Up to 16 sensors for temp / moisture : -55°C - +125°C
Web server for configuration and remote monitoring
Permissions: Administrator, Manager, User
Task Builder:
50 Scheduled Tasks
50 Conditional Tasks
20 Restart tasks
20 Override Schemes
Email Alarms by User Terms
RTC with NTP synchronization
configuration of almost all I/O
No software Required
Basic Script Support for Advanced flexibility
Data logging, graphs (logged data)
Static or DHCP IP address
Modbus, SNMP, Remote Service, IP Filtering
572.85 €
Item number:X-400-I
Web Analog input module. 8 x Analog in, 4-20mA, sample rate 25Hz with Log, 1 x RJ45, Modbus/TCP, 9 - 28VDC
8 x analog inputs - Sample Rate 25 times per second
8 x input - Single ended: ± 1.28V, ± 2.56V, ± 5,12V, ± 10,24V
input 1 - 4 Can be 4-20mA
Web server for configuration and remote monitoring
Permissions: Administrator, Manager, User
Tasks
50 schedule planned
50 Conditional
20 overroubed
Email Alarms by Defined Terms
Supports Encrypted Email Servers, such as Gmail
RTC with NTP server synchronization
No software Required
Basic Script Support for Advanced Flexibility
Logging - Graph Presentation
static or DHCP IP Address Configuration
Modbus, SNMP, Remote Service, IP Filtering
On-site update
Supply voltage: 9 - 28VDC
665.18 €
Item number:X-418-I
1-Wire Temperature and Humidity sensor for Web-based X-4XX and X-600M controllers. -40 - +80°C, 0 - 100% RH. 3 meters
1-wire combi sensor for temperature and humidity
3 connections: +5VDC, Gnd, data
Max. length of cable to controller: 180 metres
Mounting bracket for wall
Mounting bracket for penetration
Temperature range: -40 - +80°C
Accuracy: ± 0.4°C (0°C to 80°C)
Humidity range: 0 - 100% RH
Not suitable for environments with repeated or prolonged condensation
Accuracy: ± 2%
Sensor type: Digital 1-wire (Maxim DS18B20)
Cable length: 3 meters
Probe length: 100 mm
Probe diameter: 17.5 mm
284.75 €
Item number:X-DTHS-P
2 Power relay Expansion module for X-400 or X-600 Web controller. 2 x 20A, 250VAC. COM, NO, NC
Expansion modul med 2 kraft-relæer op til 20Amp
250VAC ved NO, 30VDC ved NC
10 polet fladkabel til Controller
Daisy chain til næste Expansion modul
RS485 kommunikation mellem modulerne
Forsyningsspænding: 9-28VDC
Mål: 99 x 78 x 36 mm
341.43 €
Item number:X-11S
8 Relay outputs COM, NO, Expansion module for X-400 and X-600 controllers from ControlByWeb. 8 x 2.5A / 30VDC
Expansion Modul til X-400-I og X-600M-I
8 x slutterelæ 125VAC / 30VDC 2,5Amp
10 polet interconnection fladkabel til Controller
RS485 kommunikation mellem enhederne
Forsyningsspænding: 9 - 28VDC fra Controller
Mål: 99 x 78 x 36 mm
341.43 €
Item number:X-12S
2 channel Thermocoupler module for X-400 and X-600 controllers from ControlByWeb. Type K is from -200°C to +1250°C
Expansion module for X-400-I and X-600M-I
2 x Thermocouple connections for K-type Temperature sensor
10 pole interconnection flat cable for controller
RS485 communication between the devices
Supply voltage: 9 - 28VDC from Controller
Dim: 99 x 78 x 36 mm
341.43 €
Item number:X-13S
Waterproof temperature sensor with 1-wire interface. Dallas DS18B20 chip. -55 - + 125 ° C. + 5V, GND, 1-wire data
Digital temperature sensor with 1-wire interface
Sensor diameter: 5.5mm
Sensor length: 50mm
Cable: 1 meter
3-wire cable: + 5VDC, GND, data
Max distance from feel to controller is 185 meters
IP66
stainless steel sensor
33.63 €
Item number:X-DTS-S3C













