Item number X-317-I
Web-enabled Volt / 4-20mA output module over LAN and Internet. 5 x analog +/- 10V, 4-20mA 16bit - Individual scaling, 9 - 28VDC
Network-based analog output Module
5 x Separate analogue output channels
Output signals: 0-5V, 0-10V, ± 5V, ± 10V, 4-20MA
The output signals are software configured
output signals are independently programmable and scalable
built in isolated DC-DC Supply
Voltage supply: 9 - 28VDC / 5WATT
No special software or device drivers Required
Password Protected Web setup and control pages
Static or DHCP IP address
XML and Modbus / TCP
can be updated on site
removable terminal connector
828.52 €
Excl. VAT
Quantity
Physically in stock
X-317-I ™ is a web-based analog output module with 5 x output channels. The analog outputs correspond to a programmable logical controller (PLC). In contrast to a PLC, the X-317 I is designed for web-based applications. No add-on software or hardware is required. X-317 I can be configured, programmed and tested in full using its built-in web server. The web setup pages are intuitive and easy to use and do not require special programming skills.
X-317-I can be used as a stand-alone unit as well as act as a peripherals for other devices such as a programmable logical controller X-600M- I.
X-317-I have 5 pcs. Precision 16-bit digital for analog converters (DACs). Each channel can be programmed to 0-5V, 0-10V, ± 5V, ± 10V, 4-20MA areas. The voltage and power outputs for each channel are on a single screw terminal block. Most industrial analog applications require insulation between the power supply and analog outputs. The X-317-I has a built-in DC-DC converter to provide isolated power to the outputs. No external isolated backplane is required.
The built-in web setup pages allow you to configure the name and settings for each channel. You can configure the range of an option to be in technical units. For example, an input value of 0 to 100% is scaled and treated to an output range of 4-20mA to control a damper motor etc.
24VDC 60W Power supply from 85VAC-264VAC. 24V / 2.5A, adjustment 21.6-29V, DIN mounting
AC / DC power supply for your rail mounting
AC Input: 85 - 264Vac
Effect: 60W
Output voltage: 24V / 2.5A
Screw terminal
Adjustable output voltage for 24 to 29V
Working temperature: -30 - + 70 ° C
Dimensions: 90 x 54.5 x 62.5 mm (H, D, B)
48.91 €
Item number:DC24V2.5A-D
24VDC 60W power supply. Ultra wide AC input from 180VAC-550VAC. 24V/2.5A, Fine adjustment from 24-29V, DIN mounting
AC/DC power supply for DIN rail mounting
AC input: 180 - 550VAC
Power: 60W
Output voltage: 24V / 2.5A
Screw terminal
Adjustable output voltage to 24 to 29V
Working temperature: -30 - +85°C
Dimensions: 125 x 102 x 32 mm (H, D, W)
95.94 €
Item number:DC24V2.5A-D+
Other products in the same category:
3 x temperature measurement with PT100, PT1000 sensor and nine RTD elements, 16bit resolution, RS485 bus. 10 - 30vdc.
Module for PT100 or PT1000 sensor with 4-, 3- or 2-wire
for nickel temperature sensor (Ni RTD)
16 bit resolution
15 Measurements per second (Total)
Supply voltage: 10 - 30vdc / 1 Watt
Master RS485 must establish bias voltage
Dim: 123 x 72 x 35 mm
378.95 €
Item number:M485-ADRTD3-I
Logic Controller with Data Logger. 1 x RJ45 Ethernet, 1 x RS232, 1 x RS485. Supports XV plug-in I/O board, 12 - 48VDC
The logger / controller with socket for internal I / O expansion bus (eg. Relay module)
is programmed with simple logic functions
IF-THEN-ELSE, AND and OR simplifies the setup
supports SNMP, SMTP , FTP, Modbus RTU and DCON
Ethernet 10/100 / 1000Mbit
setup via the integrated Web server
1 x RS232 ports
1 x RS485 ports
Supply voltage: 12 - 48VDC
712.21 €
Item number:L-CON-LOG
CAN bus repeater. Amplifier and restores correct pulse shape. Up to 800kbps. Opto-isolated. DIN bracket.
CAN Bus Booster
CAN specification 2.0A and 2.0B
ISO 11898-2 standard
Max. Baudrate: 800 Kbps
Jumper for 120Ω Terminal resistance on the CAN bus
2 CAN channels
Automatic Baud Rate
Up to 100 nodes on each CAN port
Removable terminal block
DIN bracket
Supply: 10 - 30vdc
Call +45 56 66 20 20 for price
Item number:M485-CAN-I+
Network Module with Digital I / O Korenix Jeti / O 6550
Network module with digital I / O Korenix JETI / O 6550
Channels: 14/8
Digital inputs: 14 pcs., Logic 0: 0 - 4 V, Logic 1: 5 - 30V
Digital outputs: & nbsp; 8 pcs. Open collector, 5 - 40 V 250mA
Isolation: Optical 2500 VRMS for analog and digital inputs and outputs for the power supply
Magnetic 1500 V from the network interface for the power supply
10/100 Mbit m / RJ45 their connector
Operating temperature: - 25 ° C - 70 ° C
Supports Modbus / TCP, OPC server, SNMP. Software included for configuration
For DIN rail mounting
Supply: 10 - 30 VDC via terminal block, Max 1.92 W
186.80 €
Item number:ETHIO14D8D-K
Programmable Industrial Controller with 8 Digital inputs and 4 Relay outputs
ARM Cortex - A53 CPU , 1.2 GHz
RAM 1Gb SDRAM
16GB of memory
2 x RS232/422/485
8 x DI and 4 x relay outputs
DC input 9-32V
4G module
OS : Linux Raspbian
User need knowledge of linux and programing
Documentation for DI/O and 4G module
766.88 €
Item number:RPI-4G-8I4O
HMI 4.3" Controller Panel with touch, RS485 bus, MODBUS RTU, GUI design, C and Ladder. RTC. 12 - 48VDC
4.3" HMI Control panel for I/O modules
LCD color display with touch
Free HMIWorks development tool
Library for useful applications
MODBUS
RS485 serial port
Supply voltage: 12 - 48VDC, 2.5W
Dimensions: 126 x 92 x 29 mm
Wall mounted in wall back piece 86 x 86 mm
Operating temperature: -20 - +50°C
299.89 €
Item number:HMI4.3"SER-I
Industrial controller for measuring and controlling the processes. With ethernet and 4G, with data logging, MQTT, IoT
Advanced Controller with logging
With slot for internal I/O expansion module, A/D, D/A, D/I, D/O, relay
Program with simple logic functions - WISE (Web Inside Smart Engine)
Logic functions with IF-THEN-ELSE logic
Supports SNMP, SMTP, FTP, MQTT, Modbus / TCP / RTU and DCON
Ethernet 10/100 / 1000Mbit
Setup via the built-in Web server
1 x RS232 port
2 x RS485 port
Supply voltage: 12 - 48VDC
1,188.98 €
Item number:L-CON-LOG+4G












