Netværk repeater

Netværk repeater

Netværk repeater
There are 9 products.
Internet over power lines - Ethernet through the same phase of electrical cables

Ethernet through the same phase of electric cables - sold as a set (2 pcs.)

Not suitable for industrial use.

400.00 kr
Item numberETH-ELNET-P500
Physically in stock
10Mbit BNC AUI repeater 2 port FD200-R

Rest storage

2 Ports Repeater to 10 Base2 and 10 Base5 Network
BNC / Aui Ethernet
can convert between Aui and BNC networks.

1,500.00 kr
Item numberETH-BNC-AUI-REP
Physically in stock
Network repeater for LAN cable

10/100 / 1000Mbit PoE Network Extender
Extend the network cable with PoE over the magic 100 meters
4 pieces. Extenders provide a maximum distance of 500 meters
Extenders are powered from PoE and pass PoE on to the next Extender
Dimensions: 94 x 70 x 26 mm

PoE In: Max 30.8 Watts

PoE Out: Max 26 Watts
Weight: 189g

800.00 kr
Item numberETH-POE-BOOST-1G+
Physically in stock
Ethernet over 2-wire with 8 ports VDSL2 converter, up to 1km. Built-in 8 port switch, 2 x SFP

REMAINING STOCK


Ethernet over telephone cable 1 x twisted pair cable

VDSL module with 8 port switch and SFP slot

Up to 100Mbps at 300 meters

Up to 1km - automatic speed adjustment

Break the 100 meter limit with a VDSL connection

Transparent data connection

8 port VDSL2 switch with 2 shared RJ45/SFP ports

Purchase ETH-VDSL2ROUTER to create a link

5,900.00 kr
Item numberETH-VDSL2-8
Physically in stock
Ethernet over 2-wire connection with VDSL. 10 / 100Mbit. 4 Ports Switch. Up to 1.4km.

Use VDSL connection over 2-wire cable, where Wifi is an unstable connection

Up to 1.4 km over e.g. old telephone cable with 2 VDSL modules

Use 2 pcs. ETH-VDSL2+4+ or ETH-VDSL2+A and ETH-VDSL2+4+

Ethernet over 2-wire connection with VDSL

Ideal solution when the network distance is over the 100 meter limit

Ideal solution when a Wifi link is an unstable connection

Provides a transparent data connection

Supply: 5VDC, 2A power supply included

DIP switch: VDSL connection, one must be set to CPE and the other to CO.

Prepared for DIN mounting, wall mounting. DIN brackets are available separately.

SOLD INDIVIDUALLY! Order 2 pieces for a set.

Dimensions: 155 x 86 x 26 mm

1,079.00 kr
Item numberETH-VDSL2+4+
Physically in stock
Ethernet over Coax cable, 1 km with PoE. Data and PoE via coax cable (25W)

1000 meter - network extender over coax cable.
Poe transferred in cable
1 x 10 / 100mbit base-TX RJ45
Auto-Negotiation / Auto-MDI / MDI-X
Poe Standard: IEEE 802.3AT / BY
PoE Output: 48-56VDC Max. 25 Watt
PoE Mode: End-Span, RJ45 Pin 1/2 (+), 3/6 (-)
1 x BNC Hun - RG59 Coax
Max. Distance: 200m w / Poe +, 1000m w / Poe, 1600m without Poe
Power supplied from 48-56VDC min. 2amp

2,717.00 kr
Item numberETH-VDSL-RG+P
On the way in
Ethernet for VDSL2. Up to 1.4 km - DANBIT A / S

Use VDSL connection over 2-wire cable, where Wifi is an unstable connection
Provides a network connection without affecting data
Up to 1.4 km Ethernet bridge over e.g. 2-wire laid down telephone cable
Speed depends on cable and length - up to 90Mbps
Automatically adjusts speed to highest speed
Can also communicate with ETH-VDSL2+4+ (with 4 port switch)
1 x LAN 10/100 BASE-T RJ45 auto-MDI/MDI-X port
1 x RJ11 female (pin 3 and 4)
Supply: 5VDC, 2A power supply included
DIP switch: VDSL connection, one must be set to CPE and the other to CO.
Prepared for DIN mounting, wall mounting. Your bracket is purchased separately
SOLD SINGLELY! Order 2 pieces for a set.

1,079.00 kr
Item numberETH-VDSL2+A
Physically in stock
Ethernet Extender up to 1.4 km above Coax cable with Vdsl. 300Mbps. VDSL where WiFi provides unstable data connection

Break 100 meter border with VDSL over RG59 Coax cable
1 x RJ45 10/100 / 1000Mbit
Up to 300mbit / s - duplex (automatic speed optimization)
Unroubing Data connection
Temperature: 0-50 ° C
5VDC 2A Power supply included
75Ω cable must be used
Use 2 pcs. Eth-VDSL-RG + G to a connection

1,707.00 kr
Item numberETH-VDSL-RG+G
Physically in stock
Waterproof PoE extender 100 meters, up to 500 meters with cascade, PoE 15.4W/30W/60W/90W

PoE extender with 1 x PoE in and 2 x PoE out

PoE extender to 100 meters.

Powered from the PoE source.

Power consumption: 2W

PoE to next extender

Up to 500 meters

100/1000Mbits

IEEE802.3af/at/bt

Temperature: -20 to +60°C

Dimensions: 133 x 73 x 41 mm

788.00 kr
Item numberETH-VDSL-POE-EX-IP67
Physically in stock
Showing 1-9 of 9 item(s)