There are 46 products.
M485 Profibus til HART Gateway konverterforKonverter / Forstærker

PROFIBUS TO HART Convert, Gateway
4 x HART Canals
Max. 2 pcs. HART Masters
Point-to-Point or Multi-Drop HART Mode
Possibility of connecting 15 HART modules
PWR / RUN / ERR indication LED
Built-in Watchdog
4 kV ESD Protection
Operating temperature -25-75 ℃
for DIN rail mounting

6,514.00 kr
Item numberM485-PROFI-HART
On the way in
USB til 4RS232 inkl. kabelforRS232

Få 4 stk. RS232 porte på PC via USB porten

Forbind 4 x RS232 enheder til USB port
Metal kabinet og med vægmontering
Baudrate op til 115,2 kbit/s
Supporterer ikke hardware licens nøgler

Supporting Win10

1,207.00 kr
Item numberCNV-USB-RS232SL-4P
On the way in
ICPDAS I-7551 provides optical isolation to an RS232 bus - Danbit A / S

RS232 galvanic isolator, 3000VAC
With dual DC-DC converter, provides isolation both ways
Transmits Tx, Rx, RTS and CTS or DSR and DTR (selected)
Up to 115 kbit / s
Entrance: DB9 female, output: DB9 male
10-30VDC, screw terminal
DIN rail

794.00 kr
Item numberM485-CNV232I232
Physically in stock
ICPDAS I-7567 is a USB to HART converter. 1 Hart port with optional 250 Ohm termination.

USB to Hart Bus Converter
to HART Short / Long Frame
to Hart Burst Mode
Point-to-point or Multi-Drop Hart mode
Up to 15 HART slave units < Br> Allow 2 Hart Master
Module Configuration Tools and HART communication
Power supplied by the USB port
Selectable 250Ω load resistance

2,792.00 kr
Item numberM485-USB-HART-I
On the way in
USB to RS422/485 adapter - Supports XP to Win11, Server 2008 R2 to 2022

USB to 1 x RS422 / RS485, w./ screw terminal

Max speed up to 921.6 Kbit/s - RS422 / 485 port

Select port type from DIL switch and jumper

Default set to RS422

Supports Win7, 8/8.1, 10, 11, Server 2008 R2, Server 2012 R2, 2022

(WHQL Certified)

535.00 kr
Item numberCNV-USB-RS485+
Physically in stock
Convert USB to RS422 / 485 with isolation FTDI FT232RL. Windows 10

Get an RS485 or RS422 port on the PC via the USB port
Galvanic isolation (optical) 2KV - 3 x 6N137 IC chip
DB9 male and screw terminal for serial connection
Baud rate up to 921.6 Kbit/s
Selection of port type with DIP switch
Support Win 10, Android
FTDI chipset FT232RL

1,288.00 kr
Item numberCNV-USB-UNI-I+
On the way in
USB to RS232 - 32 Ports (Rack Mount)

USB-32COM-RM - 32-Port RS-232 USB-to-Serial Adapter, Metal Case, Rack-Mountable.

  • High speed
  • 128 byte transmit FIFO & 384 byte receive FIFO
  • Serial port protected with surge protection of 10KV
  • Built-in switching power supply of 100V~240V
  • Standard 19-inch, 1U rackmount chassis
Call +45 56 66 20 20 for price
Item numberCNV-USB32RS232
On the way in
MOXA UPORT 1150 USB to RS232/422/485 adapter with 1m cable

Get a COM port on the PC via the USB port

MOXA USB to RS232/422/485 converter.

Compatible with USB 2.0

Software selectable RS232, RS422, 4-wire RS485 and 2-wire RS485

Certified drivers for Windows, WinCE 5.0 and Linux

15 KV ESD protection

Supports Win11

1,612.00 kr
Item numberCNV-USB-SER9+MIU
Physically in stock
USB to 1x RS232/422/485 isolated converter, Moxa UPORT 1150I

Compliance: USB 1.0/1.1 compliant, USB 2.0 compatible
12 Mbps USB data rate
Baud rate: 50 bps to 921.6 Kbps
Drivers provided for Windows, WinCE, and Linux
Serial Standards: RS-232/422/485 Connector: DB9 male
LEDs for indicating USB and TxD/RxD activity
Optical Isolation: 2 KV
OS support: See in Description
Windows 11 support
Linux Support : Linus 2.4.x, 2.6.x, 3.x

2,058.00 kr
Item numberCNV-USB-SER9+MIU-I
Physically in stock
USB to 1x RS422/485 converter, MOXA UPORT 1130forUSB - RS232/422/485

Get a RS485 / RS422 port on the PC via the USB port
Software for choosing a fixed COM port - very useful
Compatible with USB 2.0
12 Mbps USB data rate
921.6 kbps maximum baud rate
Driver for Windows, WinCE, and Linux
Mini DB9 male for terminal block adapter
LED for indication of USB and TxD / RxD activity
15 kV ESD protection for 2 kV optical isolation

1,608.00 kr
Item numberCNV-USB-SER9+M3
On the way in
ICPDAS I-7520 is an RS232 for RS485 converter with galvanic isolation (optical)

Optoisolated RS-232 for RS485 converter
3kVDC isolation on RS232 from DC input
ESD protection for RS232 / 485 
Baud rate 300 bit / s to 115,200 bit / s 
Supports power inputs of +10 V DC to +30 V DC 
Operating temperature: -25 ° to + 75 ° C
For DIN rail mounting

893.00 kr
Item numberM485-CNV232+I
On the way in
ICPDAS I-7524 is an addressable RS485 for 3 x RS232 ports.

RS485 & nbsp; recoverable RS232 controller / converter
Link to 3 x RS232 units from 1 x RS485 bus
Baud speed 300 bit/s to 115,200 bit/s
10 V DC to + 30 V DC
Dual watchdog
256 KB SRAM buffer
1 x & nbsp; RS485 address per. serial interface
Operating temperature: -25 ° to + 75 ° C
For DIN rail mounting

2,855.00 kr
Item numberM485-CNV4RS232
On the way in
Optoisolated RS485 RS422 (4-wire duplex) repeater. RS422 to RS485 DIN Rail mounting

Optoisolerated RS422 / RS485 Repeater
3000vdc Glavanic isolation
2 threads RS485 is half duplex (switch-talk)
4 threads RS485 / RS422 A full duplex (both ways at the same time)
Translator from RS422 (4-wire) for RS485 (2-wire), semiduplex
automatic directional change and baud rate.

1,034.00 kr
Item numberM485-REP-I
Physically in stock
Optoisolated 3-Way RS485 Repeater & Splitter for DIN Rail

Repeater and splitter of an RS485 signal
Up to 3 branches, as a star connection
It is very IMPORTANT to avoid bus reflections.
Use M485-REP3-I if the RS485 bus is to be split out for DIN assembly

1,253.00 kr
Item numberM485-REP3-I
Physically in stock
ICP DAS I-7513U-G CR, 4 x RS485 Repeater/splitter/Extender. RS485 master on input. RS485 slave on 4 outputs

Repeater and splits an RS485 signal into 4 branches
RS485 master on input polls RS485 slaves with ID
Only asked RS485 slave responds only to master
No RS485 slave can poll the RS485 bus
2-wire RS485 - semi-duplex
Extend the star bus with more M485-REP4-I
Supply: 10 - +30VDC
Temp: -25 - +75°C
For DIN-Rail mounting

1,275.00 kr
Item numberM485-REP4-I
Physically in stock
RS485 bus repeater and galvanic isolator for DIN rail mounting

Opto-isolated RS-485 repeater

2-way 3000 VDC isolation

ESD protection for RS-485

Baud rate 300 bit/s to 115,200 bit/s

Supports power input of +10 V DC to +30 V DC

Operating temperature: -25° to +75°C

For DIN rail mounting

983.00 kr
Item numberM485-REP2-I
On the way in
Galvanic isolator RS232 DB9 male/female - 2500VAC, 115 kbit/s, 12VDC

RS232 galvanic isolator, 2500VAC

Transmits Tx, Rx, RTS and CTS

Up to 115 kbit/s

Input: DB9 female, output: DB9 male

RX, TX, ON indicator

12VDC / 100mA (-12V, +gnd)

Power supply included (3.5/1.3mm)


1,130.00 kr
Item numberCNV232I232DB9
Physically in stock
RS232 to RS422 / 485 - Get a RS422 / 485 port on the PC

With CNV232-485PW + you get an RS485 or RS422 port on the PC
Selecting RS422 or RS485 with DIL switches on the device
Super compact with DB9 female and screw terminals
Can be powered by external voltage from 9 - 12VDC / 500mA
Operating temperature: -40 - + 85 ° C

906.00 kr
Item numberCNV232-485PW+
Physically in stock
Restlager: RS232 BoosterforSurplus / DEMO PRODUCTS

Booster til RS232 m/ 12 ledere

615.00 kr
Item numberBOOST-RS232
Physically in stock
Showing 21-40 of 46 item(s)