Item number ETHER-MODUL-4X-DI

Ethernet I/O Module with 4x DI, 4x DO, RS-232/RS-485, 10BASE-T

4 x Digital Input, Wet/Dry Contact
4 x Open Collector Output, 30VDC
10BASE-T Ethernet, NE2000 compatible
2 x RS-232, 1 x RS-485
CPU: 80188, 40MHz
Baud rate up to 115200 bps
Reverse polarity protection
Watchdog timer support
10-30VDC input, 2W consumption
123 x 72 x 33 mm
-25-75C (special components required)

321.60 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80188, 40MHz 或 兼容
Flash 512K bytes
Type Wet Contact,Dry ContactOpen Collector
Operating Temperature -25 °C ~ +75 °C
Watchdog Timer 支持
Status 支持
Ports 2 x RS-232 (TXD, RXD, RTS, CTS, GND)1 x RS-485 (Data+, Data-)10BASE-T NE2000 兼容以太网路控制器
Input Range +10 VDC ~ +30 VDC (non-regulated)
Consumption 2 W
Dimensions (mm) 123 mm x 72 mm x 33 mm
Storage Temperature -40 °C ~ +80 °C
Reverse Polarity Protection Yes
Channels 4
Sink/Source (NPN/PNP) Wet:SinkDry: Source
ON Voltage Level Wet: +3.5 VDC ~ +30 VDCDry: Close to GND
OFF Voltage Level Wet: +1 VDC Max.Dry: Open
Load Voltage +30 VDC max.
Load Current 100 mA
Baud Rate 115200 bps Max.
Parity Even, Odd, None
Data Bit 7, 8
Stop Bit 1
EEPROM 2K Bytes
SRAM 384K bytes

Ethernet I/O Module

This Ethernet I/O Module connects digital inputs and outputs to a standard Ethernet network. It is designed for industrial automation and remote monitoring applications, allowing sensors and actuators to be controlled over a network.


4x Digital Input · 4x Open Collector Output · 10BASE-T Ethernet · RS-232/RS-485


Key Features

  • Digital Inputs - supports both wet and dry contact sensing for flexible integration
  • Digital Outputs - 4 open collector channels for driving relays or actuators
  • Ethernet Connectivity - 10BASE-T NE2000 compatible interface for network integration
  • Serial Interfaces - 2x RS-232 and 1x RS-485 for communication with legacy devices
  • Watchdog Timer - automatically restores operation after a system fault


Typical Applications

The module is suitable for a wide range of industrial and building automation tasks where remote I/O control is needed.

  • Industrial process monitoring
  • Remote sensor and actuator control
  • Building management systems
  • Integration of legacy serial devices via Ethernet


A reliable choice for connecting industrial I/O devices to Ethernet networks.